Jump to content

Recommended Posts

Posted

Does anyone, by any chance, know how to get rid of the "LOW" warning and change it to the actual fuel range that is left?

 

LOW tells me there is roughly 50 miles left in the tank, but I'd like to know the actual numbers instead of the LOW sign overriding the number.

Posted

Happened to me today. You can't change it. The tank is just too low to determine an estimated mileage. Mine started reading low when my estimated fuel hit 30 miles left if that helps. It will pop up when you have 3-4 gallons left, closer to 3

Posted

that's just it, there is no "actual" number. it's an estimate to begin with so if Chevy left it up and people started getting stranded when it said there was 10 miles left they'd be up in arms. I would agree and think it is too conservative but it's understandable why it is that way.

  • Like 2
Posted

that's just it, there is no "actual" number. it's an estimate to begin with so if Chevy left it up and people started getting stranded when it said there was 10 miles left they'd be up in arms. I would agree and think it is too conservative but it's understandable why it is that way.

Been this way since at least 2000.... Too many variables to depend on an exact #...

  • Like 2
Posted

I think what might get me more is that the gauge is reading E at the same time. The low fuel indicator is one thing, but the gauge should be a bit more accurate. Not sure why the vehicle doesn't display the gallons left like the Onstar app dashboard does. Maybe that's an estimate too but I find it irksome to have the gauge read E and then you fill up and have 2-3 gallons left. It doesn't happen often but along those lines the OP is right, sometimes you need to know what's left. As it is the indicator goes off and the gauge looks empty and you know you can still drive around for a couple days.

Posted (edited)

bummer, but at least you have a nice truck to do it in. Average commute in the US is something like 25 minutes, over 2/3rds are less than 15 miles each way, half less than 10. so yeah, a day or two. my light seems to go off when there are about 4 gals left. I always think I'm about to run out since the gauge is buried on E then end up pumping 23.x gallons with no worries.

Edited by thefishhawk
Posted

It's not much longer, about 30 min. and 23 miles one way all winding back roads so in and out of throttle a lot. A lot of people in my area commute to DC. They can keep that hour plus commute one way.

 

And it's the same on my truck, had the light on when I pulled out of my driveway this morning and hit a gas station about halfway home on my way home. Pumped in 24 gallons so I would say mine comes on for the last 4 gal

Posted

Every vehicle I've had I would take a jug of fuel with me and run it out of gas, so I would know. I have not done it with this one because I don't know if it would be bad for the high pressure pump. I think I read something about it in the factory manual, but since I would read it until I'd wake up and it took 20 times of that to get through the stupid thing. The really need one for people who have driven before and one for the new drive that shouldn't be operating a vehicle without training.

Posted

i have a ultra gauge installed that tracks my MPG much more accurately than the OEM does. and also tells me exactly how many gallons i have used.

i half suspect the tank is a little bigger then 26 gallons because when the light comes on your at about 3 gallons. i find it hard to believe the engine keeps running and finding fuel even when on un level ground. with the tank that long you would think all 3 gallons would slosh to the front or back leaving nothing near the pump. but I've yet to run out even with 2 gallons left! i don't think i want to find the bottom of the tank but i can also verify that the fuel gauge is about as dead nuts accurate as you can get. at 1/2 tank I've used exactly 13 gallons at 1/4 tank i have about 6 gallons left.

if there is any discrepancy its between 1/4 and empty because it should be out at E but there seems to be a couple gallons left.

also the tank is for the most part rectangular top to bottom.

some cars have an oddly shaped tank so the fuel level verses the amount of gallons stored at different levels is not linear. but the truck tank should be easy to measure with a float.

also the fuel gauge samples the level over a period of time and determine the average of the samples it is pretty accurate. only time its been off is when i park down hill with less than 1/4 tank it will show low fuel warning because the fuel is away from the sender.

 

also the low fuel light like most cars is nothing more than a thermistor. it heats up and creates a lower resistance when its not covered in fuel. if fuel is around it, it cools off and the light goes out. it is a pretty accurate way of measuring the amount of gas in the tank.

the question is how many gallons are exactly in there? my guess would be 5 when the light comes on but I'm not going to test that theory.

Posted (edited)

I don't like running down until the "Low Fuel" warning comes on. I do it sometimes, but it's rare. I'm more a 'get gas when the tank is in the 1/4 full area kind of guy.

 

But the times I've had the "Low Fuel" warning appear, I was already watching the remaining fuel range reading. Once it's below 50 miles, I figure I'm just being a procrastinator. As a pilot, I know that fuel at the gas station isn't going to help you if you run out. Too easy just to stop earlier, than to risk running out...either in an airplane or my truck. Running out of fuel in a truck isn't any fun. It's happened to me a handful of times over the decades. Trucks are too big and heavy to push, and I'm getting old too. Too old to push a big truck. :nopity:

 

Just put some gas in it early. What's the big deal? :dunno:

Edited by spurshot
Posted

I always want to know for the unknown circumstances. I don't like to leave things up to guessing, but I'm like you I will fill up any time if I'm at a 1/4 tank or below and by a station.

Posted

totally agree, just sometimes that situation sneaks up on you where you are towing into a headwind in the middle of nowhere and you went from half to low indicator before you know it or you are on a weeklong backcountry trip or something and things happen. I like the idea of carrying a jug a testing it out. Great feedback on the ultra gauge, thanks.

Posted

just assume when the light is on and your at E that the tank is empty and you need to be concerned! if you make it to your fuel station your lucky!

how's that?

lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • There's some truth to the above, but also, she's selling fullsize trucks and bread/butter CUV's like hotcakes, meanwhile, extracting GM's pickups from the deep discounting sales game.   GM's stock has held its own during her tenure, and the more recent buybacks are delivering cash back to investors and signal confidence in their direction forward. Even with the EV losses.   GM is an example of a modern publicly traded company. The #1 goal of any publicly traded company is to deliver the most value possible to shareholders. Despite being a car company, building the best car isn't GM's path to delivering maximum shareholder value.   McDonalds doesn't make the best burger, or the best coffee.   I've mentioned in another thread, I really don't / won't ever understand Cadillac or Buick in a modern context. Both brands are completely dead to me. I'll cede that the Escalade is a nice SUV, but the brand and nameplate mean nothing to me, and GM will never persuade me to pay north of $170k for a gussied-up Tahoe or Burb. Other people don't mind doing that and that's their purview.   The C8 shares absolutely nothing in common with any other current Chevrolet or Corvette on the market. Since its introduction 8 years ago, it's developed quite the following. It did what other Corvettes couldn't do: reduce the average age of its buyer. GM has something there, and I see them investing in the car. They'd better not mess that up.   We've successfully derailed Grumpy's thread again, but I think this one is meant to be more of a random thought thread so a little wandering is probably OK.
    • Sliding doors ftw   Also, Sienna ftw as well.  The in-laws got a 2024-2025 recently when their 2019 sienna was totaled due to a deer back in June.  They've been getting 38-40mpg on the 65mph highway they live on.
    • Forgot to mention that this started after changing the oil I use mobile 1 full syn with mobile one filter but I did add pro lube additive and was the first time doing so and is making me wonder just can't see why that would matter
    • I apologize for long post put going to try to explain everything. Parts replaced so far: Cam sensor Crank sensor Cam phaser valve Cam phaser solenoid Fuel pump Maf 1 injector Pcm Pdm   So about 2 weeks ago coming off the highway my 2007 yukon xl with the 6.2 stalled and would restart. Had unit towed back to house and I messed around with relays and unit started. Drove it the next day and same thing. Had it towed again. Scanned unit and had code p0300 with misfire data showing mainly cylinder 7 but I know that won't cause a no start. Measure fuel pressure and found only 42 psi replaced pump to have unit stall again and not restart. This time I stayed on back roads and just waited for it to restart about 30 to 60 min. During this time I found I have no injector pulse but have good power at injectors. Started unplugging 1 injector at a time and found when unplugging cylinder 7 pulse came back so i changed injecto and same issue. Turns out unit just happen to ready to start at that time. Scanned into unit and found no reason for the pcm to take away injector pulse so I replaced the pcm and same issue. I figured timing sesnor controlled the injector pulse so I replaced both sensors and while I had the water pump of i replaced the vvt components while i was in there. Read multiple people have luck chaging the maf for this issue so I changed it. Unit still stalls to this day and loses injector pulse on the ground side when it does. Have noticed watching the live data the pcm is request injectors to fire via injector pwm value. I have redone the ground wires at the left bottom of the block knowing this was the ground location for the pcm but still no luck. I am a mechanic by trade but this is having me pull my hair out. If anyone has something to have me check I will gladly im not much of a parts thrower but im about to load the cannon
    • Actually.  Wait.   I just re-read your original post.  Are you talking from INSIDE the truck you have to hit unlock?  Or from the key fob?  I had assumed from the key fob.   IF you are talking the inside unlock button, I assume you are shifting to park and its not unlocking the doors?  If so, that is changed via the settings page in the radio.  Go to SETTINGS, then VEHICLE and then it should be under LOCKS or DOOR LOCKS or something like that.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...