Jump to content

Recommended Posts

Posted

My 2004 GMC Sierra cruise control just stopped working. I had no previous issues before this. I checked my cruise switch and brake pedal switch and cruise fuse with a ohm meter and they are okay. I have not changed any brake lights bulbs recently either and all brake lights are working. One strange thing to note is if I am driving down the road and rapidly continue pushing the cruise button the green cruise light will come on then back off rapidly as well.

Thanks for any help.

Posted

My 2004 GMC Sierra cruise control just stopped working. I had no previous issues before this. I checked my cruise switch and brake pedal switch and cruise fuse with a ohm meter and they are okay. I have not changed any brake lights bulbs recently either and all brake lights are working. One strange thing to note is if I am driving down the road and rapidly continue pushing the cruise button the green cruise light will come on then back off rapidly as well.

Thanks for any help.

I have fixed my cruise control and wanted to reply to help other people out. Under the hood is the place to start troubleshooting. Straight back from the battery mounted on the wall is a black box with two connectors. This is the Throttle Actuator Control Module and it has two connectors on it. With the key off remove the larger of the two connectors and the pin out goes as follows.

9,10,11,12,13,14,15,16

1,2,3,4,5,6,7,8

 

pin 14 is cruise control on 12 VDC

pin 4 is cruise control set 12VDC

pin 5 is cruise control resume 12VDC

pin 6 is the ground coming from the brake lights. goes to about 11.6 VDC when the brake pedal is pressed.

 

With the connector off turn the ignition on but do not start the engine. Check for 12 VDC at the appropriate pins to check the cruise control inputs from your turn signal switch. Then check the ground coming from the brake lights. It should be a very low resistance. O ohms is best but single digits will work. This is where my problem was. I read 63 ohms. I then went through both tail lights and the 3rd brake light and just pulled the bulbs out and put then back in a couple of times to clean connections and my resistance went to 0 ohms. And my cruise control is now working again. Also at this same point the brake pedal switch can be checked. Switch your meter to VDC and press the brake pedal. Should go to about 11.6 VDC.

 

Hope this helps anyone struggling with the same problem.

  • Like 1
  • Thanks 1
  • 4 years later...
Posted

I am having this issue right now on my ‘03. Exact same symptoms, even the quick flashing green cruise light. The only thing I would add is that I washed the truck recently ( in the Canadian winter) around the same time I noticed the cruise stop working. I also have a reverse light out but not sure if that is related. I appreciate this post because it gives me a place to start checking. Thank you.

 

K

  • 4 months later...
Posted (edited)

I have a 2004 GMC Sierra 1500 SLE. My Cruse control stopped working after I plugged my travel trailer into the trailer plug on the bumper. Here's the wierd part, it only works when I plug the trailer in now. When I remove the plug from the truck the cruse control stops working. Any direction would be greatly appreciated.

Edited by Time2Fly2
Miss spelled words.
  • 4 weeks later...
Posted

I'm having same issues on my 1999 sirrea 1500 v6 only thing new in the truck is I added to 10in kicker and a 1100wat amp. And I upgraded my tailgate lights they plug into my trailer connector. Could one of them be my problem and if so how can I fix it without removing the new stuff I added

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • https://www.msn.com/en-us/autos/news/fuel-economy-stickers-don-t-tell-the-whole-story-aaa-data-reveals-why/ar-AA26ocHk?ocid=winp2fptaskbarhover&cvid=6a4122ea3dae47e5b8dfbed5d4fd3d55&cvpid=648f6b4fc2fa4eddb4c12893aeb957ed&ei=59
    • What’s missing in all this is patience and investment in the future. Buy a 170K starter home. Ten years later sell it invest in a more expensive home. Eventually you’ll have a 600K home and pay starter home payments. Buy a starter car. Maintain it well. Save the payments after it’s payed for then buy an expensive car if you desire. Buy a tumbler make your own coffee, pack your lunch. Cook your own dinner. Most importantly take care of your car.
    • People mislead themselves. Statistics are highly useful indicators.   Here's the tie-in to this thread. If an oil sample tests shows a wear indicator of 7 using cheaper ACDelco oil, and a wear indicator of 2 (lower = less wear) using a particular brand of Mobil oil, and wear has a linear relationship with engine lifespan, anyone could assume that Mobil is reducing wear by more than 50% (let's just say a 200% reduction for you red state people trying hard to do math) which leads to increasing engine life by 2x. Perhaps, in a vacuum, by itself, when dreamed by AI.   Yeah?! That's what the statistic is saying, isn't it?   No, it isn't. It didn't come out and say engine life is doubled. That's a very bad assumption, and a case of severe myopia by assuming something potentially untrue about the only data point in focus.   Average cost of a new car is 50k. You bet it is.   The median cost of a new car is more like 35k. Expensive cars are skewing the perception that "average" now means a $50k price of entry for a very average automobile. And that's not true. People who don't understand statistics twist the living heck out of them to mean all sorts of things they don't actually mean.   "Average" new car payment is $1000/month. Yep, it is. And in that number are all the $35k new car buyers who bring significant equity, and the $25k new car buyers who finance the car for a month just to get a rebate, and then pay it off. Know what isn't in that number? All the payments made by people who don't finance a car.   Picking one's own data point (don't have a car payment, never paid $50k for a new vehicle, my house cost $170k, I afforded a middle class lifestyle on $4.50/hr) is just a data point. Just like earning $25/hr in an area where the median home price is almost $1 Million is a data point. In fact, it's a lot of data points given that 80% of the US population lives in/around major cities. They're not idiots; the vast majority of them do it to make a living because that's where the big money is.   The highs have become higher, lows have become lower, and how your personal mileage varies is not truth for an entire country. At the same time you can't NOT acknowledge the data. While it doesn't paint YOUR personal picture, it certainly tints the reality that you also live in, as does your single data point.    
    • Glad you had success with it. I did as well, but about 5-6 months later it returned. Tried again, same result. This was after the dealer made several attempts and never even got it to slow down.
    • 3.15 Kroger’s in Montgomery Tx
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...