quick LED question!

[bowtie_Z]

So im throwing some halos and led's around my truck. Anyone know the best place to splice into for a power line? Im thinking the battery is a no go since Theyre led and i think it would be too mucb juice. Ive got the truck apart so a quick response would be greatly appreciated.

[SULLVERADO]

I had the anzos on my 2010, i wired the halos and led bulbs to the park lights. locatated the wire and spliced into it on each side, never had a problem

[TJay74]

12v is 12v no matter if it is at the battery or after being sliced into a wire. I will say some parts of the harness do not like to be spliced into, it can jack with the CANBUS system as it is very sensitive to voltage changes.

[morrislee]

12v is 12v no matter if it is at the battery or after being sliced into a wire. I will say some parts of the harness do not like to be spliced into, it can jack with the CANBUS system as it is very sensitive to voltage changes.

 

What he said.

 

Most aftermarket prebuilt LED bulbs and assemblies are going to take anywhere from 9v to 30v, large room to play with.