Light bar/ Aux Light switches

[cpttimerestraint]

If you have homelink (or maybe even if you don't) you might want to consider a remote harness like this:

http://www.ebay.com/itm/KAWELL-1-Leg-Plug-Play-Remote-Control-Wiring-Harness-Switch-Flashing-Mode-300W-/181687741568?hash=item2a4d6eec80

 

Eliminates having to run wiring to the interior and finding a spot for a new switch.

+1 I did this and it was really easy to wire. One thing i found out is that the dual harness has both legs come on at the same time. You can't have the sides operate independently of each other

 

Sent from my SM-G900V using Tapatalk

[Delta Hotel]

 

I ran it through the nipple on the main rubber grommit that the majority of the wiring is going from the engine bay to the cab. Just had to get a utility knife and cut a slit in it and ran a hanger through. Taped the wires to the hanger and pulled them through.

Kerrslight, I think I know, but can you confirm where exactly the "main rubber grommet" is on these 1500 5.3 (2015) trucks?

 

I have multiple opinions and am hesitant to just start shoving coat hangers thru and risk damage.

 

Thanks!!

Dave

[papageoff]

This is where I put my main two switches.

 

Where did you get the bezel for those switches?

 

 

Sent from my HTC One_M8 using Tapatalk

[SkippyG4]

Where did you get the bezel for those switches?

 

 

Sent from my HTC One_M8 using Tapatalk

http://www.otrattw.net/home.php

 

Sent from my SAMSUNG-SM-G935A using Tapatalk

[pdosescu]

Here's mine

[pdosescu]

 

Sent from my iPhone using Tapatalk

Edited April 17, 2017 by pdosescu

[Ffkomo]

Wait, lightbar in a 17 with active shutters?! Please say more!

[Smurk]

Wait, lightbar in a 17 with active shutters?! Please say more!

+1

[Oldcabin01]

 

Here's mine. Only three switches, but enough for me. Current running a light bar with two blanks for future expansion.

 

 

Sent from my iPhone using Tapatalk

[pdosescu]

+1

Yes, a light bar in a '17 with active shutters! There's about 65mm of clearance. You can't go too wide, unless it's curved. I did a 16" triple row, straight non-curved bar.

 

 

Sent from my iPhone using Tapatalk

[Smurk]

Yes, a light bar in a '17 with active shutters! There's about 65mm of clearance. You can't go too wide, unless it's curved. I did a 16" triple row, straight non-curved bar.

Sent from my iPhone using Tapatalk

What brand of light bar?

[AllTerrainX]

Here's mine. Only three switches, but enough for me. Current running a light bar with two blanks for future expansion.

Sent from my iPhone using Tapatalk

Where did you get that piece for the center console?

[grizzlyltz]

Interested also

 

 

 

Sent from my iPhone using Tapatalk

[Oldcabin01]

Hey guys, it was custom made during my stereo install. Pretty simple though, just a basic panel friction fit into place.

 

 

Sent from my iPhone using Tapatalk

[Lalibert]

Yes, a light bar in a '17 with active shutters! There's about 65mm of clearance. You can't go too wide, unless it's curved. I did a 16" triple row, straight non-curved bar.

 

 

Sent from my iPhone using Tapatalk

What brand of light at did you use and do you have any pics from the install?

 

 

Sent from my iPhone using Tapatalk