Jump to content

Recommended Posts

Posted

My engine was normal at idle and light load. but under load in V8 and V4 mode it started making a loud tick.

Okay I gotcha, so no noise unless there was a load? What kind of load would you say weight wise?

 

 

Sent from my treestand using Tapatalk

Posted (edited)

MOhunter, I listen to your video. This is exactly what mine does.. its not loud, but it's super annoying.

Edited by derailed
Posted

MOhunter, I listen to your video. This is exactly what mine does.. its not loud, but it's super annoying.

Turn your a/c off for at least a minute and drive and see if it goes away then let me know

 

 

Sent from my treestand using Tapatalk

  • Like 1
Posted

I tried it, no difference.

 

I was driving through a new area today with Jersey barriers very close to the drivers side of the truck and heard it much louder than usual. I would say that its drivers side for sure now.

Posted

I tried it, no difference.

 

I was driving through a new area today with Jersey barriers very close to the drivers side of the truck and heard it much louder than usual. I would say that its drivers side for sure now.

I just tested again yesterday, try one more thing. I noticed with a/c off it still does it. What I did to make it much less noticeable, was turn a/c off, then turn on your defroster for the windshield and crank the temp up to at least 74. It is significantly less noticeable when I do that. Wait about a minute after and test

 

The chatter sound comes directly behind my drivers side a/c vent

 

 

Sent from my treestand using Tapatalk

  • Like 1
Posted

dropping of my truck again to have the tick looked at. I will let you guys know how I make out. I am going to refuse to take the truck back until its gone.

Posted

I just tested again yesterday, try one more thing. I noticed with a/c off it still does it. What I did to make it much less noticeable, was turn a/c off, then turn on your defroster for the windshield and crank the temp up to at least 74. It is significantly less noticeable when I do that. Wait about a minute after and test

 

The chatter sound comes directly behind my drivers side a/c vent

 

 

Sent from my treestand using Tapatalk

I don't know if it's my imagination or actually true, but there did appear to be a slight difference with the AC off.

 

What do you think the correlation is?

Posted (edited)

I think my engine is ticking again. i've come to accept I've got a lemon of a truck. What a disappointing experience this whole thing has been. Sounds like there are multiple major issues with these trucks. My first brand new GM vehicle and I won't be rushing back. I've had lots of good used trucks from them. $50,000 and it makes we want to :throwup: .

Edited by stetsie
Posted (edited)

I don't know if it's my imagination or actually true, but there did appear to be a slight difference with the AC off.

 

What do you think the correlation is?

There for sure is a difference when ac is off and a vent besides the main dash board ones are on. (Such as windshield defroster)

 

I have no idea. I'm almost thinking it's something with the cabin fan, or something with the ac system. I know the motor does not tick/knock, it's something else. It correlates with throttle though, and only is heard around my driver side vent, nowhere else

 

 

Sent from my treestand using Tapatalk

Edited by MOhunter92
Posted

brought mine in. They claim to still not be able to duplicate the issue. As soon as I drove off the lot I could clearly hear it. I even showed the head tech a video of the tick while driving. so annoying. This is the 3rd time ive brought it in. I always tell the writer to call me if they cant duplicate it but they never do and just call me at the end of the day saying they didn't find anything. truck sounds like a shit box from inside the cab. Sounds like an old truck with a manifold leak.

Posted

If I could do it over again I would have bought something else. not to mention the transmission is terrible in this truck(6 speed auto)

Posted

brought mine in. They claim to still not be able to duplicate the issue. As soon as I drove off the lot I could clearly hear it. I even showed the head tech a video of the tick while driving. so annoying. This is the 3rd time ive brought it in. I always tell the writer to call me if they cant duplicate it but they never do and just call me at the end of the day saying they didn't find anything. truck sounds like a shit box from inside the cab. Sounds like an old truck with a manifold leak.

 

Yea, it's very frustrating. You can hear it outside too... roll your windows down next time your next to a jersey barrier.

 

Rather disheartening when one of the selling points of this vehicle was how quiet they are inside.

 

.... and that is true, and I think the reason you can hear this "tick" so well in the cab.

  • 4 weeks later...
Posted (edited)

I can't stop trying to determine the noise in my motor at certain times. Since they replaced the AFM valve lifters, manifold, fuel lines and DI fuel pump, I'm starting to narrow it down to the variable valve train or the oil lubricating it.

 

It only happens sometimes, under certain loads. that's why i'm leaning to the noise happening at certain valve timings. Since the seems to run fine, just has a loud knock sometimes, I'm wondering if this thin 0w-20 oil is too thin and causing these noises.

 

When i start my truck in the morning the oil pump makes that groan that some people hear.

 

Is anyone running 5w-20, 0w-30 or 5w-30 oil instead of the recommended 0w-20?

Edited by stetsie
Posted

So I finally had the opportunity to bring mine in for service. The mechanic took a ride for me and we actually couldn't get the truck to duplicate the noise. He suggested that possibly the air temperature had something to do with it... it was about 47* during the test drive and first cold day morning of the fall.

 

Later that afternoon when it was warmer it was ticking like normal. Keep an eye on yours on the these cool mornings and warm afternoon and see if the results are similar. I wonder if it has anything to do with the AC pump.

 

They told me it was the high pressure fuel pump ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
    • Looks nice. I still have my 2000, 1500. Bought a 2025, 1500 for retirement. Feels solid. These trucks have a bad rap on the internet. My brother has a `24 1500, 5.3 with 52,000 miles. No problems at all. Mine hasn`t either but mine`s only at 12,700 miles. Have seen some of these things with 100,000 miles with no problems.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...