Tenscourts' 2016 LTZ/Z71 CCSB 4WD Silverado

[sage55]

New wheels this week. 20 inch CK156 replicas.

 

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/topic/192614-tenscourts-2016-ltzz71-ccsb-4wd-silverado/

 

Do you have a link to where I can buy those wheels?

[tenscourts]

 

Do you have a link to where I can buy those wheels?

I bought them at a local shop. There are 2 replica dealers online that sell them but I chose not to go that route. OE Wheels and Stock Wheel Solutions.

 

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[tenscourts]

Haven't posted here in a while... This is right after my quarterly detail and not long after replacing my Z71 shocks with Fox 2.0 coilovers and rears. I have the Z71 front coilovers and rears plus front spacers that should give you 1.5 inches of lift if anyone is interested. Just PM me.

 

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[Wolfangovich]

Trying to follow your build, looking for the instructions on the installation of the dual battery. Any help would be appreciated. TIA

[tenscourts]

Trying to follow your build, looking for the instructions on the installation of the dual battery. Any help would be appreciated. TIA

There aren't any instructions per se. I have links to my YouTube videos in the thread and I believe I have covered most questions. If you have read through the thread and YouTube videos and still have a question I'll do my best to answer.

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[jgraves13]

Sub'd, nice truck!


Sent from my iPhone using Tapatalk

[tenscourts]

Haven't posted anything in a while but just had the truck in the shop this past week for some major upgrades. 4 inch BDS with DSC Coilovers and rear leaf packs. 2 inch Bora spacers in the rear for balance. Steps sprayed with Line-X (chrome was chipping). 20x9 +24 Snow Flakes in Gunmetal with machine finish. 295/60r20 Nitto Ridge Grapplers. And the hidden gem behind the wheels...Wilwood brakes all around. I also had the exhaust done but it's way too loud for me so going back Monday for a muffler swap.

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[Madcow2020]

Haven't posted anything in a while but just had the truck in the shop this past week for some major upgrades. 4 inch BDS with DSC Coilovers and rear leaf packs. 2 inch Bora spacers in the rear for balance. Steps sprayed with Line-X (chrome was chipping). 20x9 +24 Snow Flakes in Gunmetal with machine finish. 295/60r20 Nitto Ridge Grapplers. And the hidden gem behind the wheels...Wilwood brakes all around. I also had the exhaust done but it's way too loud for me so going back Monday for a muffler swap.

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

How do you like the 4”BDS, did you do UCA, and how does it ride?


Sent from my iPhone using Tapatalk

[tenscourts]

How do you like the 4”BDS, did you do UCA, and how does it ride?


Sent from my iPhone using Tapatalk

Stock UCA's but ride's like a dream. No body roll. No nose diving when I hit the brakes hard. And the Wilwood's will stop on a dime.

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[NemesisC5]

When I purchased my 2017 GM listed a larger front big brake setup in the GM Accessories catalog but they were not available yet. I was tempted later to purchase them but it was front only and not equal in quality to Wilwood product - Wilwoods are the icing on the cake, very nice touch. My compliments on your build.

[tenscourts]

The shop that did my latest upgrades posted these pictures of my truck. After a few weeks on the new setup I had to have flares to protect the sides. Not typically a fan but I think they turned out well.

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[BeeeCeee]

Tenscourts, just want to thank you for your write up on your dual battery install.  I used your write up to install mine and all went without a hitch.  I appreciate it.  Thank you!

 

 

[tenscourts]

Glad my experience helped. Always a good feeling to get positive feedback!

Tenscourts, just want to thank you for your write up on your dual battery install.  I used your write up to install mine and all went without a hitch.  I appreciate it.  Thank you!
 
 

Sent from my Pixel XL using Tapatalk. My build thread: http://www.gm-trucks.com/forums/index.php?/topic/192614-Tenscourts'-2016-LTZ/Z71-CCSB-4WD-Silverado

[BeeeCeee]

The AUX battery is currently running my ARB fridge/freezer inside the cab.   You're right about how tedious it is to feed wire through the rubber boot in the firewall.  I ended up using a shortened wire hanger to feed through the boot and tied the end of the cable to it.  That worked great.

 

It will soon be running a switch box  inside the truck cap to control three sets of lights, USB ports and an Anderson Powerpole connection.

 

Thanks again.

[tckirkpa]

I'm thinking of doing the same thing on my 2018 Sierra SLT.  How did you mount the boxes on the battery and isolator on the electronics box?  Velcro? Epoxy?