Jump to content

CHEVY SHAKE FIXED!

07Softail

By 07Softail
in Troubleshooting & Recalls

 Share

Recommended Posts

Tahoe02 Enthusiast

Tahoe02

Posted
Posted

There is a difference between the Dealer balancing the tires and having a road force balance. Did you get a print out showing the percentage(I am not an expert but I believe 15 and below is acceptable) at each wheel. If so maybe you could post it and one of the experts on here could give you their opinion. Good luck.

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

07Softail
07Softail

My shaking issue has been fixed so I will tell you what fixed mine and I would almost guarantee this will fix them all. I was building up my 6l80 with some performance parts and sent my shaft out to

07Softail
07Softail

Well my symptoms where just that.... a SHAKE! It would shake between 50-60 the whole cab would shake. It felt like King Kong was trying to shake me out of the truck. I could even feel it in the steeri

scott.moody.9401
scott.moody.9401

You could check it yourself with it still in the truck. Just put a dial gauge on a good sturdy mount or base with the back wheels raised and watch the dial indicator as the driveshaft is rotated by ha

Posted Images

GasCan420 Enthusiast

GasCan420

Posted
Posted

No Road Force balance, just your everyday normal balance at local tire dealer.  I will bring the Road Force topic up to mechanic today and ask for a print out to post.

Thank You Tahoe02!

GasCan420 Enthusiast

GasCan420

Posted
Posted

After further investigation, looks like I don't have the Chevy Shake after all, instead I have the Sierra Shudder, caused by a bad torque converter, so says the mechanic who seen and fixed this problem several times on the 2015 Sierra's. We shall see once the parts arrive and replaced!

KARNUT Senior Enthusiast

KARNUT

Posted
Posted

I was at my brother in laws house a few days ago. He just bought his 4th suburban, he buys them used and drives them to the ground. The sister in law took us out to lunch, he couldn’t make it. I didn’t have the heart to point out the vibration and shake I was noticing. He going to ask me I’m dreading it.


Sent from my iPhone using Tapatalk

  • 2 weeks later...
  • 2 months later...
Crimsondenali Enthusiast

Crimsondenali

Posted
Posted
On 7/20/2018 at 5:03 PM, GasCan420 said:

No More Sierra Shudder!

Torque Converter was replaced and the vibration is GONE!!!

Time to go on an Adventure.

IMG_20180720_080205.jpg

Hello I just read the problems you were having with your truck I have a 16 Denali 6.2 8spd I’ve the same issue as yours it shakes under light throttle from the get go I can feel it in the steering wheel as well ,,,did yours shake at 70+mph ??? I’m very frustrated as I’m not in the states my truck was imported from Dubai To another country so the parts availibilty is limited.... I did however balance the tires which improved a little but not completely eliminated. 

  • 6 months later...
Ruben7206 New Member

Ruben7206

Posted
Posted
On 15/10/2016 at 4:43 PM, lba0213 said:

did the tachometer jump when the shake occured? and was it constant or intermittent?

Having the same exact issue, could you tell me if you were able to fix the vibration?

blcws6 New Member

blcws6

Posted
Posted

Yea I found a fix to the issue. I sold the truck! No joke.

 

they replaced the tranny once for shudder and two years later it came back with a brand new tranny. I cut my loses. 

  • Sad 1
Ruben7206 New Member

Ruben7206

Posted
Posted
On 5/7/2018 at 7:12 AM, GasCan420 said:

After further investigation, looks like I don't have the Chevy Shake after all, instead I have the Sierra Shudder, caused by a bad torque converter, so says the mechanic who seen and fixed this problem several times on the 2015 Sierra's. We shall see once the parts arrive and replaced!

 

On 5/7/2018 at 7:12 AM, GasCan420 said:

After further investigation, looks like I don't have the Chevy Shake after all, instead I have the Sierra Shudder, caused by a bad torque converter, so says the mechanic who seen and fixed this problem several times on the 2015 Sierra's. We shall see once the parts arrive and replaced!

Dealing with the same problems! Was it fixed once they replace the torque converter? 

lba0213 Enthusiast

lba0213

Posted
Posted

They did work on my torque converter back in 2016 eventually GM replaced the entire tranny for a brand new one. 2 years later in late 2018, the exact same thing started again on a trip up to my lake house. As soon as I had the time, I went straight to the ford dealership and sold the truck in a swap for a 2018 fi150 platinum. Couldnt be happier. I do miss the big 6.2 v8 thought

  • 1 year later...
jwhitesides Enthusiast

jwhitesides

Posted
Posted

I have done the following with no success: 2014 Silverado 5.3L crew cab 2wd

 

* New pads and rotors

* New shocks all around

* New U-joints with balanced drive shaft

 

The worst is at 70-75 mph but I do get the shake on occasion at +45 mph.

 

I am going to have my tires balanced and chalk the tires just to make sure I am not having a tire slipping on the wheel.

 

Any other suggestions? HELP!

  • 1 year later...
Jfurman New Member

Jfurman

Posted
Posted
On 10/15/2016 at 5:43 PM, lba0213 said:

did the tachometer jump when the shake occured? and was it constant or intermittent?

My truck is doing the same thing your truck is doing. Did you ever figure out the issue?

  • 1 year later...
RangerRay New Member

RangerRay

Posted
Posted (edited)

My problem is not the shaking caused by anything in the running gear.  My issue on my 6.2L 2018 8 speed transmission Silverado is predominantly when running in drive and it drops the motor to V4 from V8 and under torque it will shake you teeth out until is bangs it way back to V8 mode.  The GM bulletin fix of changing the Transmission filters and fluid did not work. Applied the bulletin at 42K miles and it has had no effect on this issue.  Yes, I can achieve some improvement by shifting the vehicle into M from D and selecting M7 as the as the gear and this prevents the truck from shifting to M8 and from shifting to V4 from V8.  It still may shift ruff in the lower gears, but the issue is really when it is trying to run in V4 mode.  Noone seems to address this issue specifically.  They are talking about changing and balancing tires and all those things, but it is not my problem.

 

Edited by RangerRay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,911
    Total Members
    8,960
    Most Online
    jaszr2
    Newest Member
    jaszr2
    Joined

  • Who's Online   5 Members, 0 Anonymous, 460 Guests (See full list)

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...