Jump to content

Recommended Posts

Posted

278,000 Mile Services

447,405 Km

 

11/18/2025

 

2015 Terrain 2.4

1K mile OCI

 

5 Quarts Mobil 1 Euro 0W40

No filter (2)

 

No longer tracking consumption. 

  • 3 weeks later...
Posted

279,000 Mile Services

 

 

12/8/2025

 

2015 Terrain 2.4

1K mile OCI nominal

905 actual

 

5 Quarts Mobil 1 Euro 5W40

No filter (3)

 

Timing cover seal now leaking enough to wet the frame but not the ground. 😬

0W40 improved fuel economy. 

Shorter than normal OCI as weather is play a part not in what Dizzy needs but in what I can do. Below freezing and now the next two days they are projecting rain then back to near zero until the Bears with a Superbowl. :crackup:

  • Like 1
  • Thanks 1
Posted
On 12/13/2025 at 6:02 PM, OnTheReel said:

Somehow, some way…this person damn near doubled your mileage on this motor…IMG_4526.thumb.jpeg.0777c064d1250b41f0433f7828fa0df8.jpegIMG_4527.thumb.jpeg.e4cc3cb8a80ae09bd81b25b0f5b4555b.jpegIMG_4528.thumb.jpeg.fcf8d92b29ebdf99c2bb15fc6824af6b.jpeg

 

I've seen a few like that. Either multiple motors OR OTR long haul delivery. Crazy length for the that transmission. Would love to interview the owner(s). Absent context, it means little. Still, not matter how it was done...hat's off. 

  • Like 3
Posted

Yeah, once they go to auction like that we really have no backstory. I’ve seen a few in the 300-400k range but half a million really got my attention. Even if they put a motor in it at some point (probably) they got their money’s worth outta that chassis.

  • Like 3
Posted
On 12/24/2025 at 2:31 PM, customboss said:

 

2 answers stood out to me from the mechanics answering the ?, the second guy when he said "well, none really" and the last guy that responded with the Willys/Ford made flathead 4. After my Dad was discharged from the army in 1946, he and his youngest brother started farming together. They picked up a war surplus Willy's made Jeep to tow a small service trailer that they had made to haul a diesel tank, compressed air, bulk grease and assorted grease guns, tools, and what have you. This Jeep I would surmise lived a pretty tough army life as the paint was faded from the time my Dad and Uncle picked it up and the exhaust system was basically nonexistent, about a foot of the exhaust pipe remained back from the manifold where it had been jaggedly broken off, and of course a leaky radiator. Even though it was only a 6V system, I don't recall it not ever starting, only gauge we payed any attention too was the temp gauge which topped out a 212F, if it started creeping up past 160F it was time to pull out the water jug and top off the radiator. 4WD p/u's weren't all that common until the 60's and although my Dad and Uncle got tired of backing that grease wagon trailer up, it wasn't until the 80's that they could justify the cost of a used 4WD p/u that was a dedicated use "trap wagon". They ended up finding a 3/4 ton 60's era cornbinder that was pretty indestructible in it's own right which they used until their retirement in the early 90's. My second cousin restored the Jeep to it's former glory, ready to be called on by the army again.

  • Like 1
  • Thanks 1
Posted
2 minutes ago, garagerog said:

2 answers stood out to me from the mechanics answering the ?, the second guy when he said "well, none really" and the last guy that responded with the Willys/Ford made flathead 4. After my Dad was discharged from the army in 1946, he and his youngest brother started farming together. They picked up a war surplus Willy's made Jeep to tow a small service trailer that they had made to haul a diesel tank, compressed air, bulk grease and assorted grease guns, tools, and what have you. This Jeep I would surmise lived a pretty tough army life as the paint was faded from the time my Dad and Uncle picked it up and the exhaust system was basically nonexistent, about a foot of the exhaust pipe remained back from the manifold where it had been jaggedly broken off, and of course a leaky radiator. Even though it was only a 6V system, I don't recall it not ever starting, only gauge we payed any attention too was the temp gauge which topped out a 212F, if it started creeping up past 160F it was time to pull out the water jug and top off the radiator. 4WD p/u's weren't all that common until the 60's and although my Dad and Uncle got tired of backing that grease wagon trailer up, it wasn't until the 80's that they could justify the cost of a used 4WD p/u that was a dedicated use "trap wagon". They ended up finding a 3/4 ton 60's era cornbinder that was pretty indestructible in it's own right which they used until their retirement in the early 90's. My second cousin restored the Jeep to it's former glory, ready to be called on by the army again.

Great little engine and very smart response. 

  • 1 month later...
Posted

2/3/2026

Breaking News

 

Fuel dilution has been a long standing issue with Dizzy. We've gone through two pumps and a rash of injectors and hinted at ring seal failure. We've also torn the fuel tank vent system apart multiple times replacing and testing until there is nothing left to test or replace. Multiple plug and coil replacements. Revamped the PCV system and yet dilution persisted. There has been a curious offset in fuel trims after fill-ups since we got the Liner Logic Scan Gauge II system sorted and programed. Like the EUC pulling up to 30% fuel for ten miles or so after a fill. And yes I'd stop after the first pump auto click. Dealer has not idea, I had no idea and my independent mechanic is scratching his head. 

 

So......as I have a good grip on the amount of fuel used (Scan Gauge) I shorted a fill 2 gallons, lied to the Scan Gauge and then started filling whatever the Scan Gauge showed I used instead of filling to auto shut off. This placed the gauge on Full but started declining right away instead of consuming 2.5 gallons before coming off full. Pretty standard experience for most all cars/trucks.  

 

Guess what? Fuel trims never go past -5% and go back to zero +/- 2 with in a mile, standard purge time.

 

That tells me that filling to the auto shut off in this vehicle was filling the carbon canister and flooding the vent system, dumping raw fuel to inlet. That is a design flaw. I have more that doubled the OCI before the oil gets inky and stinky. It's also tripled time between P420 codes. 

 

Something I will make a practice with the Verano. Short filling. All of them actually. 

  • Like 1
Posted

281,463 Mile Service

 

Rotate and balance tires. A bit over my usual 5K. Weather and scheduling. But drives nice and straight. No worse for the wear. 

  • Like 2
  • 2 weeks later...
Posted

282,000 Mile Service

453,835 Km

 

2/12/2026

 

3,000 mile OCI, 80 oz of make up oil. 1 quart/1,200 miles. 

Rotate and balance tires. Nothing more than half an ounce required. 

 

5 Quarts Mobil 1 Euro 0W40

1 Purolator filter (red box) 

Topped off Coolant. It's a winter thing. 

Wiper fluid. Brake fluid check. 

  • Like 1
  • 2 months later...
Posted (edited)

285,000 Mile Service

458,663 Km

 

4/25/2026

3,000 mile OCI

3,080 actual

90 oz make up. 

 

5 Quarts Valvoline R&P 5W30

1 Purolator L15436 filter

 

4/28/2026

285,135 miles. Tire rotation. 

Edited by Grumpy Bear
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,682 Guests (See full list)


  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...