Jump to content

2015 Headlight lens

Jacknasco
 Share

Recommended Posts

Jacknasco Enthusiast

Jacknasco

Posted
Posted

Really hoping someone can help. So I bought the Oracle halo kit and they sent the wrong one. After I opened the headlight housing in the oven. And FYI to anyone who is interested there are two ways to seal the headlights. One is an easy to pull apart glue and the other is a heat activated plastic that you have to almost destroy the housing to get apart. Yes I got the second one in my truck. But anyway I had to ducttape the lights together so I can get to work. The right parts finally arrived and I noticed a few finger print smudges inside the lens. I sprayed the duplicolor wax and grease remover I used to clean parts with all the time and there is some sort of coating inside that turned white and cracked. Ive tried to get it all out and everything I do just makes it worse. Does anyone know where I can buy just the lens? Ive looked and cannot find the lens listed alone. Im sure with people baking the headlights this is not the first time someone has needed just the lens. Please help this has been a huge nightmare and I just want my truck back together.

Heavy 5.7 Enthusiast

Heavy 5.7

Posted
Posted

Does anyone know where I can buy just the lens?

I seriously doubt it you'll probably have to start from scratch. Just did a quick check, factory stock replacements from the bone yard run ~ $500 per side if you just want to put it back the way it was.

Jacknasco Enthusiast

Jacknasco

Posted
  • Author
Posted

YEAH it is not looking good

 

Sent from my HTC One A9 using Tapatalk

  • 5 years later...
slj2008 Senior Enthusiast

slj2008

Posted
Posted

You can try one of those headlight scratches kit ?? if you get them removed , then tint it.  i used Lamin-x , with good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • B07
      Anyone have a spare?

      By B07 · Posted

      Looking for this piece that holds the hose clamp in place. I have the hose clamp just not that other piece. Dealers and wrecking yards in my area will not sell just that piece. They want you to buy the whole air tube $100 +/- to get that $5 part.  that piece isn't molded to the air tube as I looked at my friends truck. It's held on by a screw and nut. I'm trying to put the OEM parts on the truck as the previous owner butchered things up installing an aftermarket CAI. It really looked homemade. 🤣 Thanks
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Ok I missed that part that yours is a GM. The strange part is that the choice for year ranges and within the year of 2026 is different on the Sierra then on the Chev for some reason as I am looking at my tool at the Sierra choices. Now I am guessing you see as to your sensor part number as it may be different on your truck for some reason and a call to GM should get you the part model number of the sensors you should have as well as which MHz your sensors are. I know mine are the ones as per what I listed but there are other choices in the Autel and got me wondering if by some chance they put different ones in your truck. Having said that, did you try using each of the choices starting from No 1 and going on down the list, not sure if that would mean shutting off the engine each time and resetting the tool and going at it again each time. Also I thought of something else which may sound retarded but if there was some stupid chance that the chev choice would work. The reason I say that is that the Sierra is showing a range up to 06/2026 for the various choices of sensors it could be where as the Chev has one choice that has that 12/2026. By the way it is possible to not run the truck and you may know that as per not pressing the brake but pressing and holding the start button for a few seconds and it lights up the dash ( its called service mode ) but that sucks battery power and if it were me doing it that way I would be throwing on a decent sized battery charger before doing it that way as killing your battery won't make you happy at me at all !.    Like I say, just a thought to try the Chev choices if you have already exhausted the Sierra choices but first it would be nice to know for sure what exact sensor model and hertz your truck uses as I assume only those choices that mention the sensor would work unless a choice that does not mention the sensor model would somehow work. Its frustrating when one is trying to use tools like this without the experience of the tool and the vehicle, as I am sure dealer techs themselves struggle with it when starting out or a new model year comes along that is slightly different. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      I tried before I updated the scan tool just incase an update messed it up, but it never worked so I updated the scan tool and it still didn't work.   Only difference is I click on Sierra not Chevrolet cause I have a Sierra.   If I click on 2026-2024 I didn't have any option to change placard, when I click on 2023 it does give me the option but when I try to do it,.it says vehicle not supported!   I have my region or market or whatever it is set to America I think, is that what yours is set to?
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Its just that it worked on 2024 trucks on this forum and my 2025 model truck, unless GM did something since that point to screw up access or Autel has a bad update. I haven't had need to use my tool since last year when I did the changes to the placard pressure settings and since then I updated the software on my Autel but have not plugged into the OBD so hard to say if I would get a surprise as well.    All I know last year when I bought the Autel I was warned to be sure to update it before I tried using the unit as they said who knows how long ago unit itself was actually manufactured as the software could be way out of date. 
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      And so you had gone through the process of registering and updating the tool and so on ?. All I can say is that on the front page as the tool fires up you go to advanced mode, then vehicle model comes up and you choose Silverado ( not the DRW or EV  since your a single rear wheel ) , then I think its choice 2 which is 07/2021 - 12/2026 ( 433mhz 13542523 ) as that is the series of tpms sensors and then go down to choice 5 which is tire type/pressure selection. Hit yes and it says to connect to OBD port and turn ignition on.    Having said this, I updated the software in my tool lately and these year range choices look different from the past due to them doing some updates it would appear and I have not connected up to the OBD port since last year so hopefully I am not in for a surprise with them screwing up the software and that it won't work on my truck anymore either.    So my question is, when you plugged into the OBD and started your truck it had that message on the Autel screen "vehicle not supported" ?. That does seem odd as tire shops would be pissed right off if hey can't use their tool on the model year after mine that in theory is supposed to be much the same truck ... unless GM did some change in the computer system to block certain things from access. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...