Jump to content

Steel braided brake lines

Pt187

By Pt187
in Modifications & Accessories

 Share

Recommended Posts

Pt187 Enthusiast

Pt187

Posted
Posted

Anyone have these installed? I can't find a company that makes them. I have a 2014 crew cab and would like to get some. I know of a somewhat local company that can make them but I would have to remove them all and take them there. Would rather just buy a kit already made if possible.

slee3247 Enthusiast

slee3247

Posted
Posted

Is there any reason you're interested in spending money on a system that performs very well?

 

Not trying to be rude, just curious as to why you would prefer investing here rather than elsewhere!

Pt187 Enthusiast

Pt187

Posted
  • Author
Posted

Is there any reason you're interested in spending money on a system that performs very well?

 

Not trying to be rude, just curious as to why you would prefer investing here rather than elsewhere!

 

After adding 22" wheels with 33" ridge grapplers the stopping power is not as good. I was going to add some better pads and just figured i would do the lines as well for a little extra performance. Other vehicles I've had I noticed a nice difference when adding steel braided. Also it's not a huge cost. Even if I have to get them made it will be around $100-120. I can install myself.

cbrsilv15 Senior Enthusiast

cbrsilv15

Posted
Posted

Braided lines won't give you any better braking power. They eliminate some of the sponginess in the brake pedal. That's it.

Pt187 Enthusiast

Pt187

Posted
  • Author
Posted

I know that's why I was going to add them with better brake pads

  • Like 1
Pt187 Enthusiast

Pt187

Posted
  • Author
Posted

I guess no kits available.

AllTerrainX Enthusiast

AllTerrainX

Posted
Posted (edited)

Not to dis you on your post but if you want better stopping power after adding 22" rims/33" tires (you just added a bunch of weight on all four corners), get bigger brakes and calipers. Steel braided lines wont help much. Just my two pennies.

Edited by AllTerrainX
Pt187 Enthusiast

Pt187

Posted
  • Author
Posted

If you find a good kit, post a link.

 

I haven't found a kit. This weekend I will be taking the factory lines to the place I know that will make them. I'll post the measurements if you want.

 

 

Not to dis you on your post but if you want better stopping power after adding 22" rims/33" tires (you just added a bunch of weight on all four corners), get bigger brakes and calipers. Steel braided lines wont help much. Just my two pennies.

The price of a big brake kit is not for me. They are nice but I'm positive a good set of pads and rotors along with the steel braided lines will give better braking. No they won't be big brake kit braking but will be better then the stock I have. And way cheaper. I'll be doing this weekend and I'll let you guys know if there is any difference at all.

 

People spend a good amount of money for mods that make very minimal performance changes. For me about to spend around $100 for lines and a few hours of my time I think will be worth it. To each his own though. That's the beauty of aftermarket. Everyone can be different.

 

And I was just asking if anyone knew of a kit. Not opinions on whether I should do this or not. I appreciate it though

  • Like 2
willyr1er Enthusiast

willyr1er

Posted
Posted

Yes, please post the measurements if you have them.

 

I had my front brake line spring a leak on my prior 03 Silverado, not fun when your pedal is on the floor and your not slowing. I would rather have the extra protection of steel braided vs rubber.

 

 

Side note: Steel braided lines are my first upgrade on every sportbike I have owned.

  • Like 1
  • 1 year later...
Q8_TwinTurbo Enthusiast

Q8_TwinTurbo

Posted
Posted
On 5/14/2017 at 5:15 AM, Pt187 said:

Anyone have these installed? I can't find a company that makes them. I have a 2014 crew cab and would like to get some. I know of a somewhat local company that can make them but I would have to remove them all and take them there. Would rather just buy a kit already made if possible.

There are stainless braided brake lines available from StopTech. 

 

I am in the process of installing the StopTech brake lines, in addition to the Baer sport rotors and Baer sport pads for both front and rear.

 

 

 

 

 
 

 

  • Like 1
Sooperdave Enthusiast

Sooperdave

Posted
Posted (edited)
On 5/13/2017 at 9:15 PM, Pt187 said:

Anyone have these installed? I can't find a company that makes them. I have a 2014 crew cab and would like to get some. I know of a somewhat local company that can make them but I would have to remove them all and take them there. Would rather just buy a kit already made if possible.

Changing out the brake lines is a great way to firm up the overall system.  I may be adding some when I decide to do my brakes to help add additional braking power. Don't let the negative comments keep you from doing anything. According to Stoptech website, they offer the front set part number#950.66002.  Good luck!

Edited by Sooperdave
Q8_TwinTurbo Enthusiast

Q8_TwinTurbo

Posted
Posted
5 hours ago, Sooperdave said:

Changing out the brake lines is a great way to firm up the overall system.  I may be adding some when I decide to do my brakes to help add additional braking power. Don't let the negative comments keep you from doing anything. According to Stoptech website, they offer the front set part number#950.66002.  Good luck!

Spooperdave, 

 

The StopTech rear brake lines set with part number 950.66504 that are listed for the 4WD model also fit the RWD trucks. I can verify this after having installed both front and rear brake line sets today.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • silveradosid
      Replacing 2.7L on 2021 Silverado with 2023 2.7L

      By silveradosid · Posted

      same here , i have a 2020 first gen and the cost to repair these engines far excedes replacement
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      But Grumpy I did show several subdivisions that had homes starting in the 170K range. If you bought a Townhouse or Condo you could go cheaper. Same with a car 3000 dollars in the 70s translates to around 20K today. There are several models at that price. You actually get more for the money. In the 70s I drove a 3000$ car bought a 28K home and made 4.50 per hour. Thank goodness for overtime. Today I could buy a 170K house drive a 20K car and make 25 dollars an hour operating the same machine today. The difference the house, car, machine would be better and have AC. And I wouldn’t be taxed on overtime. And statistically your wife works too. Easing the burden. I thought we agreed to disagree. I brought receipts earlier, showing examples. I think you’re more stubborn than me. I was done with this debate. 
    • Coastie05
      Replacing 2.7L on 2021 Silverado with 2023 2.7L

      By Coastie05 · Posted

      I’m definitely interested to hear the end result here. 
    • MASONV88888888
      Another 6.2L engine failure!

      By MASONV88888888 · Posted

      My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...