Jump to content

Denali Grill

trobin1991

By trobin1991
in Modifications, Wheels & Tires

 Share

Recommended Posts

trobin1991 Enthusiast

trobin1991

Posted
Posted

Anybody swapped out a Denali grill onto their SLT or AT4 yet? Cant decided on what time level I am getting yet (SLT,AT4, or DENALI$$$$), but LOVE the denali grill.  Seems silly to pay all that extra money just for the grill, but realize you get a lot more with it as well....

  • Thanks 1
FknLeon Enthusiast

FknLeon

Posted
Posted (edited)

I'm upgrading my 2017 lease to a 2019 SLT and thought about buying the grille seperate. The Denali grill is available all over the place. Ebay has it already, but I think most have the camera with the wiring setup. 123388985296?fits=Year:2019%7CModel:Sier

Edited by FknLeon
Daverado Enthusiast

Daverado

Posted
Posted

That's funnny, the Denali grille was a huge turn-off for me.. too much bling.  I ended up buying a Silverado HC instead partly because of that.  While I was at the GMC/Chevy dealer buying it I saw a blue AT4 there and realized I hadn't considered or even looked at them at all really.

 

If I had seriously looked at an AT4 I might be driving a Denali with an AT4 grille today instead. :smash:

 

trobin1991 Enthusiast

trobin1991

Posted
  • Author
Posted

Different strokes for different folk man!  I just love it and always have.....I even looked at RAM and Ford......something just keeps brining me back to the sierra! 

  • Like 2
  • Thanks 1
  • 3 months later...
_CROW Enthusiast

_CROW

Posted
Posted
That's funnny, the Denali grille was a huge turn-off for me.. too much bling.  I ended up buying a Silverado HC instead partly because of that.  While I was at the GMC/Chevy dealer buying it I saw a blue AT4 there and realized I hadn't considered or even looked at them at all really.
 
If I had seriously looked at an AT4 I might be driving a Denali with an AT4 grille today instead. :smash:
 


I’m considering doing this with my Denali. I didn’t care for the ride or the interior on the AT4. Just need to tone down the bling a bit.


Sent from my iPhone using Tapatalk Pro
  • Like 2
Daverado Enthusiast

Daverado

Posted
Posted
On 6/2/2019 at 8:33 AM, _CROW said:

I’m considering doing this with my Denali. I didn’t care for the ride or the interior on the AT4. Just need to tone down the bling a bit.

 

 

I was also curious to see if the Denali chrome center grille would work in the AT4 body-colored outer grille ring/surround.  Just shrinking it down the Denali chrome a bit, not eliminating it completely.

 

If you do try any of it follow up and share pics! :thumbs:

  • Like 1
  • 1 year later...
Gtaylor57 New Member

Gtaylor57

Posted
Posted
On 6/2/2019 at 5:33 AM, _CROW said:

 


I’m considering doing this with my Denali. I didn’t care for the ride or the interior on the AT4. Just need to tone down the bling a bit.


Sent from my iPhone using Tapatalk Pro

 

 

On 6/2/2019 at 5:33 AM, _CROW said:

 


I’m considering doing this with my Denali. I didn’t care for the ride or the interior on the AT4. Just need to tone down the bling a bit.


Sent from my iPhone using Tapatalk Pro

 

I have the Denali and would like to change the grill to an AT4 one but can’t find anything anywhere on this topic. Too much chrome with the Denali 

  • 7 months later...
Meaty1 New Member

Meaty1

Posted
Posted

I have a Denali 2019.

Front end accident. 

Decide to go with AT4. 

The front camera position is much lower and angled differently! 

 

Top down view is all skewed in the front. 

 

Anyone fix this? 

 

GMC parts says it is the same camera between AT4 and Denali. . I'm not sure. Must be software? Or a module then that accounts for the difference? 

 

Talking to body shop now to deal with it. Any help would be appreciated

Dmax3 Enthusiast

Dmax3

Posted
Posted

I have the Denali and have always wanted to swap out the grill for an AT4.  I bet the camera is angled on the AT4 grill differently because of the 2" lift, although I haven't noticed any issues after levelling my truck and not adjusting the camera angle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Multigate Connector Difficult to Connect Fully

      By Chuck FB · Posted

      This is just a thought as I can't claim this is the correct thing to do but will suggest it and you can decide if its something you would try. First round up some electrical contact cleaner spray as they at least claim its not supposed to damage the components ( brake cleaner depending on the type is a real destroyer of plastic etc ) and to use that to assist to clean out any grime from the pins as well as the mechanism by spraying and working the lever etc. Then my next thought is to use silicone spray lube and not on the pins but on the seal and the pivot assembly. It may not be possible to spray it on certain area's and have to use a q tip as Davestar mentioned to keep it from getting on the pins. Dielectric grease can be fine on some things but its easy to get too much on if not careful and then gunk things up and a possible risk of getting it on the pins or sockets. The silicone spray is able to get into a mechanical component to help lube and on surfaces its just a fine film to reduce friction such as that seal. Also it can be doused off with a good flush of the electrical contact cleaner the next time for a repeat of a "clean and then lightly lube" step process to wash off any dirt that had stuck to the exterior etc of the plug.   Free advice, yes. Good advice ... now there's the question mark !    
    • JohnRoy
      2020 Sierra 2500 windows rolling down

      By JohnRoy · Posted

      Hey thanks yall for the info. It apparently was the key fob - the "reserve" key fob works just fine. Yall were all over it. Great input! JRD
    • PunchT37
      Wow I'm in a pickle. (Broke down truck) and a story.

      By PunchT37 · Posted

      I just bought one of these.   https://www.topdon.us/collections/diagnostic-tools/products/artidiag-pro   Yeah, it`s got a cable. $250/year after 2 years. Do I want more? Yep. But, I`m not working any more and can`t afford a whirlpool in my tool box.
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Why don't I have a good scanner? I've always wanted one when I've needed one.   My latest reading says I don't need to do a relearn on the ckp sensor on a 1995 with OBD 1.5. The relearn is prescribed for the later-model 1995's which shipped with actual OBD II when GM completed the transition in prep for the 1996 MY. I need to confirm that. Did you know forums are disappearing? Knuckleheads on Facebook... it's not the same. It's just not.   So, scanners. Again, shooting myself in the foot for having eBayed my Snap On MT2500 "brick" with all the adapters. Not that I couldn't buy another but those are getting quite old, and mine wasn't new enough to work on 2000's vehicles.   Damn it (as I'm scanning my email between paragraphs here). Did you know there's a 2000 Jimmy 2-door on BaT that's ending this morning? It's local. I want it. 14k miles. Absolutely beautiful.   Back to scanners. MT2500's are old. Solus, now that could be a contender. There's a ~2008 Verus with a system error that's basically new in box for cheap. Hmm...I'm not sure about a scanner that runs an archaic version of windows (95 or CE, I can't tell).   I want the ability to reset and rotate TPMS, test individual modules, bleed ABS, electronic parking brake controls for servicing brakes, relearn procedures and other bidirectional controls.   Snap On does an MT2600. It's a new model as of last year, marketed as their "entry" scanner. Entry? Only where $1900 gets you through the doorway plus, I'm guessing, $1000/year if you wish to keep it current. So goes scan tools actually designed for production environments. Want decent products with excellent support, you pay for it.   Everyone is raving about Autels and TopDons and Foxconns and all these newer brands that are selling the $500 "prosumer" scanners for backyard hacks like me. They're tempting...honestly. Updates are cheaper, base prices are remarkably cheaper... And you get to deal with bugs and translation whoopsies and, well, just don't use it on anything expensive, OK? Having a dealer replace an ECU because it needs to be re-imaged after an adventure in scanning is no joke. But I think most people are getting by OK with these units.   eBay on a scratch-and-sniff pro-model oldie, a shiny new TopDon, or???   God dang it, I can't stop looking at this Jimmy. I'm ready! I'll Bring The TRailer! It's beautiful.
    • Texasdeere
      What have you done to your K2 today?

      By Texasdeere · Posted

      I removed the OE running boards.  It looked so much better.  I wish I took them off a long time ago.     I had to put something back on for my wife.  I wanted Westin Sure Grip Running Boards but they are very pricey, like $600 plus.  I was going to go with the Ionic 41's like I had on the 2019 Silverado but went with Westin Outlaw Drop Steps instead, about $200 cheaper.  They are sturdy and functional but not super crazy about the look, but it works.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...