Jump to content

door handle button locks

towdog333
 Share

Recommended Posts

towdog333 Enthusiast

towdog333

Posted
  • Author
Posted
On ‎3‎/‎5‎/‎2019 at 12:46 PM, z1boss said:

 

 

 

Here are the complete step by step instructions to get to the Passive door locks settings.

 

1.  From the main menu, click Settings.

 

Screenshot_20190305-124546_Gallery.thumb.jpg.9e46dd63e2905365bdb6c836d3ed77a0.jpg

 

2.  Click Vehicle in the top right corner.

 

Screenshot_20190305-124512_Gallery.thumb.jpg.1b6fd3ef568e7d8457b132284c3f0188.jpg

 

3.  Click the down arrow to scroll down once and then click Remote Lock, Unlock, and Start.

 

Screenshot_20190305-124519_Gallery.thumb.jpg.881f84a581f80c98ac3ca152b73d0c28.jpg

 

4.  Click the down arrow to scroll down once and then you will see the two Passive door options.  From here, you will be able to change the settings.

 

Screenshot_20190305-124523_Gallery.thumb.jpg.2d16211189c7e74cc9beb99f46021c61.jpg

 

 

Let me know if you try this and you dont have these options.  Just curious if my theory about Convenience Package 2 is correct.

Yep finally got it squared away, thanks for the help

  • Like 1
  • 1 year later...
  • Replies 34
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

MadCaddie
MadCaddie

It's in there.  Settings>Vehicle>Remote Door Lock ect.    I don't see an option to fully turn off Passive unlock, just select between driver and all doors. But there is an option to tu

towdog333
towdog333

Yep finally got it squared away, thanks for the help

JR09country
JR09country

If my key is in the same pocket as my phone the door handle buttons will not work. Switch the key to an empty pocket and works no problem. Just an FYI for you guys. Sent from my ONEPLUS A6013 using

Posted Images

Hotdoglady New Member

Hotdoglady

Posted
Posted
On 3/3/2019 at 8:04 PM, towdog333 said:

Just found out that the door handle button locks the door but won't open ?????

Have a 2019 Tahoe only 12K miles that continues to have handle button issues. Have return to the service department 4 times only to hear "It's your problem" Chevrolet has "no Issues with any door buttons". Tahoe is back at the dealership again today, drivers button doesn't work. Now the service manager claims it's the antenna in the door not working? Claims Chevrolet knows about "some issues" but has no repair or knowledge of any issues. Ask that I come get the truck and keep using the FOB to lock and unlock the door. Anyone got the same issues or know the repair for this service group?

  • 2 weeks later...
FuzzyManSir New Member

FuzzyManSir

Posted
Posted

I have a 2019 gmc elevation that the doors will not unlock when the handle button is selected.   It worked yesterday.   Remote works fine locking and unlocking the doors
 

When select button all doors should unlock (passive door unlock setting)

JR09country Enthusiast

JR09country

Posted
Posted

If my key is in the same pocket as my phone the door handle buttons will not work. Switch the key to an empty pocket and works no problem. Just an FYI for you guys.

Sent from my ONEPLUS A6013 using Tapatalk

  • Like 1
FuzzyManSir New Member

FuzzyManSir

Posted
Posted

Thanks, although it’s not the problem.   This may be the result of me opening my truck windows with my remote and hitting several buttons before getting it right.  I’m not sure so I didn’t want to add it initially to add more confusion.  
 

mcgee500 Enthusiast

mcgee500

Posted
Posted
On 3/4/2019 at 2:43 PM, z1boss said:

Yeah that's a temporary disable with a re-enable.  If you go into   Settings>Vehicle>Remote Lock, Unlock, and Start you can set what the buttons do under Passive Door Lock and Passive Door Unlock.  Mine is set to unlock only drivers door if pressed once on the drivers door button and unlock all doors if pressed twice.  Pressing any door handle button while unlocked with lock all doors.  I also have automatic locking enabled for 5 secs after closing all doors

I have mine set to open all door with push of the button on the handle as long as I have fob in my pocket.

FuzzyManSir New Member

FuzzyManSir

Posted
Posted

Thanks to the person that stated to press the lock/unlock button on the remote at the same time to make the outside door lock buttons work again.  That did the trick!!! 

 

P.S. Don’t buy a new generation GMC Sierra 2019+ unless U like recall after recall, leaking window, flooded floor and no available parts (carpet) and a transmission that shifts like a 1972 dodge power wagon.     If no service fault indicator It can’t be fixed.  
 

Sorry, GM owner but what piece of ’*^*%!   Chevy is having similar issues but not as bad as GMC.  JDP Initially quality my ass.  Maybe the last 2-3 years of a generation after years of figuring it out.  

Anyway, thanks for your help. I’m sure I’ll be using this site a lot or banded from it.

 

Can you say 5 weeks, that is how long my brand new truck has been at the dealer   Do you know what GM offered me for the BS I had to deal with, free Onstar for a couple months.   Really!!!!

  • 1 year later...
Buddy217 New Member

Buddy217

Posted
Posted
On 3/4/2019 at 11:46 AM, towdog333 said:

I didn't see anything in the setting menu for door handle locks, but will double check again. Plus they worked before and I know I didn't change nothing on any setting


Settings - Vehicle- - Remote Lock, Unlock,Start - Passive Door Unlock

 

 

obazsm Enthusiast

obazsm

Posted
Posted

I'm having a similar issue with my 2020 Sierra HD Denali. The doors will lock/unlock on both passenger door buttons, but not on either driver side doors!! any thoughts? TIA

  • 2 weeks later...
Timothy Richardson Enthusiast

Timothy Richardson

Posted
Posted
On 4/21/2020 at 8:11 PM, FuzzyManSir said:

I have a 2019 gmc elevation that the doors will not unlock when the handle button is selected.   It worked yesterday.   Remote works fine locking and unlocking the doors
 

When select button all doors should unlock (passive door unlock setting)

Yes i have the same vehicle and mine just started doing the same thing  2019 GMC elevation !!

obazsm Enthusiast

obazsm

Posted
Posted

Nothing yet. I’m still within the warranty and soon will need an oil change. I’ll have them look at it then and post the “cure”

  • 1 month later...
obazsm Enthusiast

obazsm

Posted
Posted (edited)

so have my truck in for this button problem. GMC is telling me that there is an antenna inside the door that

senses the fob, and that is what's wrong. They also said my drivers door window had been replaced since there was some shattered glass inside the door and whom ever replaced it did not replace an internal seal causing water to enter the door.

 

They think that's what caused the malfunction with the buttons on the driver's side. so they also have to order that seal but it's not covered under the warranty. Guess this is what happens when you buy a used vehicle (especially with low miles). Can't imagine that rain/water would have broken that antenna/feature in 13,400 miles!! When i pick the truck up i will question them more.

Edited by obazsm
obazsm Enthusiast

obazsm

Posted
Posted
On 9/8/2021 at 10:13 PM, Timothy Richardson said:

Thank you good luck 

Locks are working properly, read above for the fix (at least what fixed mine)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • diyer2
      Towing In Loose Gravel

      By diyer2 · Posted

      I had a boat for many years, never had a problem even with a 2 wheel drive 93 Silvy for 20 years. Good tires, proper use of the gas pedal worked.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I read through that and I won't lie, my eyes rolled at some of the quirks about how it can turn off the trailer braking for example but I can see how it could help control or even up the torque applied to the ground with each wheel in a boat ramp scenario. But of course what it can't do is increase the torque to the wheels if the need is there as it ends up being like driving the four wheel drive version of a two wheel drive ( high range that is ). So far the neighbor that ended up with the 3.0 duramax with the max tow package which meant the 3.73 gears and high range only, I think its been doing ok for what he has been towing but doubt he ventures off into the soft stuff with his holiday trailer. He may have towed his dads river boat locally with it ( he always used his 6.6 duramax before ), I'll have to ask him sometime if he got into a lack of power to the wheels situation as after all that engine produces a lot of torque at low speed once the turbo winds out a bit and I think it has the 10 speed and if so they have a pretty good first gear ratio at 4.70 I see which is vastly better than the 3 or four speed overdrive models of years ago. 
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      I did shorter OCI"s for many years without an issue, fights sludge and wear IMO. Recently started using Amsoil, will not do the recommended/advertised miles between changes. 
    • tigers2007
      Oil Fill Tube

      By tigers2007 · Posted

      GM Part Number???
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      It definitely seems quite evident that emissions and fuel economy targets rule above the best case scenario of what the engines best health and life could be otherwise. Items like DI and turbo DI engines with their LSPI issues as well as cats being reduced in life if the proper levels of certain additives were allowed to be utilized and so something has to be compromised and as you point out that is the engine protection from sludge, acid and wear which isn't in the manufactures best interest regardless to worry about in this race to profits from higher sales and so if the engines wear out sooner the next sale is closer at hand.    I am hearing that its likely the two new 2027 GM half ton truck engines will call for a 0W-30 oil, now if that is an existing oil I would have to think so but we will see in the coming months. Sadly as you've pointed out to me, over the last number of years the push has been on to reduce the actual operating temperature viscosity within each designated viscosity grade so that 11.5 to 12 range for a 30 weight for example is more in that just above 10 range at 100c along with that temporary viscosity sheer dropping it even further down as per that "energy conserving" designation, not to mention how some oils are not as sheer stable as would be ideal and that mixed with a long OCI paints a picture with a little too much glitter shall we say !.    All that and the warranty gods scaring the vehicle owner into sticking with that watery wine or risk loosing their warranty coverage if they go and use an oil that is of a higher viscosity even if it meets the emissions and LSPI requirements and would never damage the engine but may very well allow for an engines longer life depending on engine use scenarios ... high ambient temps, towing etc that push oils to their limits.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...