Raedy lift trail boss & at4

[REDDEVILMEDIC]

I guess some Bora spacers would help here.

[Chance1025]

On 9/7/2019 at 1:26 PM, Tumtum5891 said:

I went and tried a nitto 295/70r18 on stock wheels. It cleared but there was very little room between the cup and the tire. I ordered 285/75r18 wildpeaks.

Any pics of the whole truck? Does it sit perfectly level. I went with a 1.5” motofab and am disappointed as I still feel like there is a touch of rake. I measure 0.5” lower in the front.

[Tumtum5891]

19 minutes ago, Chance1025 said:

Any pics of the whole truck? Does it sit perfectly level. I went with a 1.5” motofab and am disappointed as I still feel like there is a touch of rake. I measure 0.5” lower in the front.

I havent taken a picture of the whole truck. I was planning on doing it after the new tires. I measure 41" from ground to top of wheel well on all four. 

[RLCC]

I measure 40" to the wheel liner on my stock AT4.  Did you use the lit with both spacers and the larger block in back?

[Tumtum5891]

1 hour ago, RLCC said:

I measure 40" to the wheel liner on my stock AT4.  Did you use the lit with both spacers and the larger block in back?

I put on the leveling kit. There were no blocks for the rear. That might be a lift kit your talking about. The eveling kit cimes with new upper arms and upper and lower spacers

[Tumtum5891]

285/75r18 on stock wheels. 

[JR09country]

285/75r18 on stock wheels. 

Looks fantastic.

Sent from my ONEPLUS A6013 using Tapatalk

[Tumtum5891]

22 hours ago, JR09country said:

Looks fantastic.

Sent from my ONEPLUS A6013 using Tapatalk
 

Thank you

[NickG55]

I’ve been waiting on a leveling kit as well and just stumbled upon this thread right after finding the Readylift leveling kit. Note the max tire sizes they recommend. 

 

[Tumtum5891]

5 hours ago, NickG55 said:

I’ve been waiting on a leveling kit as well and just stumbled upon this thread right after finding the Readylift leveling kit. Note the max tire sizes they recommend. 

 

What about the tire size they recommend? Ive seen this, what they recommend is with using a aftermarket wheel with 0 offset. Stock wheels are 24mm offset. 

[fuelsrock]

Time to hit the pause button on mods to my AT4.  My local truck shop just got the Readylift 1.75" level kit in and put it on for me yesterday.  I am not going to lie, the ride is definitely stiffer than stock.  You can feel more of the road or maybe it just has to break in.  I am not complaining though, because I love the new stance and look of my truck now.  I hated the rake.  Also upgraded my old 18" Assaults to 20" Assaults and 275/60/20 Ridge Grapplers.  All and all I am now satisfied with my Sierra...for now. 

[camsteven]

On 9/26/2019 at 1:20 PM, fuelsrock said:

Time to hit the pause button on mods to my AT4.  My local truck shop just got the Readylift 1.75" level kit in and put it on for me yesterday.  I am not going to lie, the ride is definitely stiffer than stock.  You can feel more of the road or maybe it just has to break in.  I am not complaining though, because I love the new stance and look of my truck now.  I hated the rake.  Also upgraded my old 18" Assaults to 20" Assaults and 275/60/20 Ridge Grapplers.  All and all I am now satisfied with my Sierra...for now. 

Curious did the stiffer ride come from the larger wheel or the level. I’m looking at installing this level in a few weeks 

[fuelsrock]

I went from 275/65/18 to 275/60/20, so that might have caused the more sensitivity to the ride.  It seemed to quiet down since I have had it a week.  I again have no complaints and love the new look!  I do think I should have gone with 285/65/20's.  I think they would have fit, but just rushed everything.

[Drew03Z]

On ‎9‎/‎10‎/‎2019 at 4:53 PM, Tumtum5891 said:

285/75r18 on stock wheels. 

Any rubbing??

Thanks for the info

[Tumtum5891]

6 hours ago, Drew03Z said:

Any rubbing??

Thanks for the info

Nope