Jump to content

Recommended Posts

Posted

I have 17,000 miles.  I have a leak at the bell housing area.  I don't see under the truck where it's coming from.  It's crazy.  Any one have this problem?   I have to take it back to the dealer!

Posted

Drive it until it blows up and then take to it the dealer.

Posted

Agree

Rear main seal.

Over filling with oil can cause this.

 

?

Posted
10 hours ago, Trucker84 said:

I have 17,000 miles.  I have a leak at the bell housing area.  I don't see under the truck where it's coming from.  It's crazy.  Any one have this problem?   I have to take it back to the dealer!

Welcome to the forum!  You will find good ideas from other proud GM owners!  Definitely take your truck to the dealer.  Things happen and you have a warranty to protect you from such problems.  The sooner the better because no one appreciates oil dripping on their driveway!

Posted

If you get under the truck there are shiny circle plugs in the bell housing the pop out and you can see if oil is in there buy sticking your fingure in and seeing if oil is there.
Also gm changed the oil amount required in this truck so even if you are not over but on spec, it needs to be at the updated amount of oil. I run low oil for a week or two before I top off.

Sent from my SM-N960U using Tapatalk

Posted

Just had mine at dealer for an oil leak that was there since 2500 miles old and it turned out to be lower oil pan. I originally thought it was rear main as it looked like that, only sweated never dripped.


Sent from my iPhone using Tapatalk Pro

Posted
Just had mine at dealer for an oil leak that was there since 2500 miles old and it turned out to be lower oil pan. I originally thought it was rear main as it looked like that, only sweated never dripped.


Sent from my iPhone using Tapatalk Pro
WoW that is rare to impossible. They are glued down by a automated robotic machine. You are the first I have ever heard of that.
When I removed mine it was very difficult, even scraping of the glue was hard.

Sent from my SM-N960U using Tapatalk

Posted (edited)
12 hours ago, 1SLOW1500 said:

WoW that is rare to impossible. They are glued down by a automated robotic machine. You are the first I have ever heard of that.
When I removed mine it was very difficult, even scraping of the glue was hard.

Sent from my SM-N960U using Tapatalk
 

Maybe the robot streamed too much porn the night before and was a little off.  :crackup:

Edited by txab
Posted

My 2018 5.3 was seeping oil in that area, they pulled the lower oil pan and re-sealed it.  It doesnt leak anymore but the tech was very sloppy with the grey sealant, crazy excessive amounts of sealant from the edges and around bolt holes.    

Posted
On ‎9‎/‎30‎/‎2019 at 7:54 AM, 1SLOW1500 said:

WoW that is rare to impossible. They are glued down by a automated robotic machine. You are the first I have ever heard of that.
When I removed mine it was very difficult, even scraping of the glue was hard.

Sent from my SM-N960U using Tapatalk
 

Rare indeed but not impossible as robots, machinery materials etc. have their moments.  I am fairly certain that the L84's L87's have gone away with the stamped portion and now looks to be full cast.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,642 Guests (See full list)

  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...