Help guys !! 33inch wheels and tires not fitting

[Jarneson]

im new to this forum stuff trying to figure it out sorry for the repost link!! 

[Snowcamo]

Sounds like you don't want to cut metal. Just sell them and find yourself a 10in wide wheel. No point in trying to make it fit just aint gonna happen without cutting or a lift.

Sent from my LG-G710 using Tapatalk

[newdude]

What is the exact tire size that you have on those wheels?  I see it just says 33" and you have a 22x12 wheel.  What size was the stock setup? 

[Frankielozano214]

I’m on 20in wheels with 33x12.5 I have minor rubbing when in reverse and when I do full lock turn, only thing I can say is lift it more not sure mines came like this, I think somebody said it was a leveling kit but still sit higher then my friend’s truck that has a leveling kit. Also was told it is a 2in leveling kit idk for sure 

Edited October 15, 2019 by Frankielozano214

[Jarneson]

5 minutes ago, newdude said:

What is the exact tire size that you have on those wheels?  I see it just says 33" and you have a 22x12 wheel.  What size was the stock setup? 

The wheels are 22x12 -44 and tires are 33x12.5r22ct 

blows my mind that  on over 100 reviews every person would have a running problem! When most say no rubbing! I’m trying to sell them now discounted 600 off losing money but need to sell! 

[Jarneson]

5 minutes ago, newdude said:

What is the exact tire size that you have on those wheels?  I see it just says 33" and you have a 22x12 wheel.  What size was the stock setup? 

The wheels are 22x12 -44 and tires are 33x12.5r22ct 

blows my mind that  on over 100 reviews every person would have a running problem! When most say no rubbing! I’m trying to sell them now discounted 600 off losing money but need to sell! 

[Jarneson]

7 minutes ago, Frankielozano214 said:

I’m on 20in wheels with 33x12.5 I have minor rubbing when in reverse and when I do full lock turn, only thing I can say is lift it more not sure mines came like this, I think somebody said it was a leveling kit but still sit higher then my friend’s truck that has a leveling kit. 

Ya I also have a 3inch pro Lyft leveling kit on mine! Thanks for the reply nice truck!!

[Frankielozano214]

Thanks! Yeah I think mines has a 2in leveling kit or lift from what these shops tell me. This is the rear, front I can’t see what it has.

[pewterliftedz]

People are so full of crap on Custom Offsets, anyone running a 20*10 or wider with a 33" will have to do some trimming. 

 

Here is what you need to do to get your setup to rub a lot less, order these plates and follow the instructions on what to cut:

https://www.roughcountry.com/gm-1500-inner-fender-trim-10002.html?gclid=EAIaIQobChMIs_G7u-ie5QIV8ZFbCh1ftA2QEAQYASABEgIrq_D_BwE

 

I did this to my truck to get my 20*10 with 295/60r20 (34*12) to stop rubbing.  My tires don't rub at all now during normal driving or reversing, the only time they rub is when I'm turning sharp and articulate the suspension.

 

You're always going to have some rubbing with a 12 wide, unless you go with a 4.5" or higher suspension lift 

Edited October 15, 2019 by pewterliftedz

[Frankielozano214]

15 minutes ago, pewterliftedz said:

People are so full of crap on Custom Offsets, anyone running a 20*10 or wider with a 33" will have to do some trimming. 

 

Here is what you need to do to get your setup to rub a lot less, order these plates and follow the instructions on what to cut:

https://www.roughcountry.com/gm-1500-inner-fender-trim-10002.html?gclid=EAIaIQobChMIs_G7u-ie5QIV8ZFbCh1ftA2QEAQYASABEgIrq_D_BwE

 

I did this to my truck to get my 20*10 with 34s to stop rubbing.  My tires don't rub at all now during normal driving or reversing, the only time they rub is when I'm turning sharp and articulate the suspension.

 

You're always going to have some rubbing with a 12 wide, unless you go with a 4.5" or higher suspension lift 

I might try this 

[Jarneson]

21 minutes ago, pewterliftedz said:

People are so full of crap on Custom Offsets, anyone running a 20*10 or wider with a 33" will have to do some trimming. 

 

Here is what you need to do to get your setup to rub a lot less, order these plates and follow the instructions on what to cut:

https://www.roughcountry.com/gm-1500-inner-fender-trim-10002.html?gclid=EAIaIQobChMIs_G7u-ie5QIV8ZFbCh1ftA2QEAQYASABEgIrq_D_BwE

 

I did this to my truck to get my 20*10 with 295/60r20 (34*12) to stop rubbing.  My tires don't rub at all now during normal driving or reversing, the only time they rub is when I'm turning sharp and articulate the suspension.

 

You're always going to have some rubbing with a 12 wide, unless you go with a 4.5" or higher suspension lift 

I have 22x12 tho! Will this still help?

[Snowcamo]

I have 22x12 tho! Will this still help?

Just norcal it and be done.

Sent from my LG-G710 using Tapatalk

[pewterliftedz]

6 minutes ago, Jarneson said:

I have 22x12 tho! Will this still help?

Yup, it will still help you rub alot less.  But you can't be afraid to cut some metal lol

[pewterliftedz]

 

2 hours ago, Snowcamo said:

Just norcal it and be done.

Sent from my LG-G710 using Tapatalk
 

That's exactly what these plates are for, it just looks way better

Edited October 15, 2019 by pewterliftedz

[Snowcamo]

 
Thats exactly what this plates are for, it just looks way better

Can someone post pics of these installed and what metal needs to be cut? Im positive i had to cut a bit. Not really sure I have enough room to add metal on top of what was cut.

Sent from my LG-G710 using Tapatalk