Jump to content

Quality tools options

Penguin VII

By Penguin VII
in Garage, Shop & Tools

 Share

Recommended Posts

Penguin VII Enthusiast

Penguin VII

Posted
Posted

Hey all,

 

I recently came across garagejournal while poking around looking at info for building a garage (which I hope to do in the next 2-3 years to start some bigger projects). Boy oh boy are those some opinionated folks over there. While I've got a lot more poking around to do I have been looking at a lot of the reviews for the new HF Icon line of tools, and everything looks real solid about them. I bought a torque wrench to replace my crappy Craftsman one and have been impressed with it's initial quality (time will tell how it holds up).

 

I know HF seemed to have exclusively garbage in the past but seem to have really turned things around in the past few years with many more quality items. I'm curious to know what tool brand you would all recommend. I refuse to spend money on Snap-On/Mac/etc. I just don't use them for a living and can't justify the cost. I've been bitten a few times by Husky and Kobalt (although maybe they have turned around in recent years as well) and Craftsman is pretty much dead to me.

 

I'm not looking for used tools because I don't want to go through the hassle of QCing everything and worrying about where to find X or Y, I'd rather just buy new and preferably from the same spot, but I don't need everything matching, just makes life simpler.

 

Anyway, what are everyones thoughts here? People still live by Craftsman? Snap-On or nothing? What is your recommendation for solid middle of the road tools?

RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted

Lots of craftsman and some kobalt. Also have a bunch of gear wrench brand sets of tools


Ryan B.

tbarn Senior Enthusiast

tbarn

Posted
Posted

Most of the brands are OK for a DIY'r. Mine are mostly Snap On, Mac and OLD Craftsman. Newer Craftsman are not nearly as good as the older ones. A lot of the time you will find that the socket wall on cheaper sockets will be much thicker because of cheaper steel. OK except it creates problems fitting in tight spaces.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
9 hours ago, tbarn said:

Most of the brands are OK for a DIY'r. Mine are mostly Snap On, Mac and OLD Craftsman. Newer Craftsman are not nearly as good as the older ones. A lot of the time you will find that the socket wall on cheaper sockets will be much thicker because of cheaper steel. OK except it creates problems fitting in tight spaces.

I've noticed that my Craftsman sockets have started to have a higher chance to round bolts. I wasn't sure why initially but I'm starting to think that the sockets are just cheap which is causing them to extend past the original sizes. I need to get a spec and measure to get a better sense of this but it's partly what started me looking at new tools.

diyer2 Senior Enthusiast

diyer2

Posted
Posted

I think Craftsman was bought by Snap On.

No more free tool exchange I believe.

I have old Craftsman, Kobalt, Mac and Gear Wrench.

My son is a mechanic and owns over $15 K of Snap On tools.

There is a quality difference with pro tools.

 

Not worth the money IMO for the DIY guy.

Buy cost effective tools and replace when needed.

I had a Kobalt tool fail. My fault.

Took it to the store and they gave me a new one.

 

:)

 

tbarn Senior Enthusiast

tbarn

Posted
Posted (edited)

Craftsman is a Stanley/Black and Decker company. Also own Mac tools.

Edited by tbarn
RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted
I think Craftsman was bought by Snap On.

No more free tool exchange I believe.

I have old Craftsman, Kobalt, Mac and Gear Wrench.

My son is a mechanic and owns over $15 K of Snap On tools.

There is a quality difference with pro tools.

 

Not worth the money IMO for the DIY guy.

Buy cost effective tools and replace when needed.

I had a Kobalt tool fail. My fault.

Took it to the store and they gave me a new one.

 

[emoji4]

 

 

You can still exchange broken craftsman tools. Ace hardware, Lowe’s and menards all currently carry craftsman

 

 

Ryan B.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
1 hour ago, RyanbabZ71 said:

 

You can still exchange broken craftsman tools. Ace hardware, Lowe’s and menards all currently carry craftsman

 

 

Ryan B.

I was told by my local Lowes that you can only exchange Craftsman tools purchased there.

captadamnj Enthusiast

captadamnj

Posted
Posted

Started picking up some cordless tools not too long ago...after looking at the Craftsman, Dewalt, Makita and Milwaukee, I settled on Milwaukee M12 platform.  Have an impact driver, impact wrench, ratchet, angle drill and some lights in inventory so far.  Went M12 over M18 as I just couldn't justify the added weight and battery cost for mostly hobbyist type work.  Have been very impressed with battery life so far, have never had an issue with a job I couldn't handle.  The M12 3/8 impact handles lug nuts on my HD no problem.  With the hex bit drill bit set, haven't found a need for a regular drill as the combination of the angle drill and the impact driver have done everything I wanted them to do.  All in all, very pleased.  And endless more options out there.  Suspect will add a circular saw and sawzall next, may put the rotary tool on holiday wish list to get myself uncorded from that tool, as well.  So far so good.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
2 hours ago, captadamnj said:

Started picking up some cordless tools not too long ago...after looking at the Craftsman, Dewalt, Makita and Milwaukee, I settled on Milwaukee M12 platform.  Have an impact driver, impact wrench, ratchet, angle drill and some lights in inventory so far.  Went M12 over M18 as I just couldn't justify the added weight and battery cost for mostly hobbyist type work.  Have been very impressed with battery life so far, have never had an issue with a job I couldn't handle.  The M12 3/8 impact handles lug nuts on my HD no problem.  With the hex bit drill bit set, haven't found a need for a regular drill as the combination of the angle drill and the impact driver have done everything I wanted them to do.  All in all, very pleased.  And endless more options out there.  Suspect will add a circular saw and sawzall next, may put the rotary tool on holiday wish list to get myself uncorded from that tool, as well.  So far so good.

I've got the M18, have been pretty impressed with it, although I've noticed that the orbital sander chews through the smaller batteries, but the larger one lasts forever. Pretty happy with the Milwaukee line of tools in the few years I've had them honestly.

  • 2 months later...
L86 All Terrain Senior Enthusiast

L86 All Terrain

Posted
Posted

I have good luck with Westward tools. You may not be able to get them in the US, we get them through Acklands Granger in Canada. They are Taiwanese made so they are great quality tools at affordable prices. Great for a DIY'er. Stanley isn't too bad either for socket sets. Wrenches: Jet Tool, Grey Tools Canada, Proto, Mac, Sunex, Mastercraft (Canadian tire Chinese) for beater wrenches or truck sets. We have the Snap On truck that comes by once a week, but you're paying 500% cost. I bought a trouble light from them to help support the truck, I figured about $50, the invoice was $167 haha never again. They sell CKRT knives with a Snap On logo for twice the price as the CRKT knife, which are both garbage btw. 

  • 1 year later...
  • 1 year later...
Spurshot Senior Enthusiast

Spurshot

Posted
Posted

Old thread, but always relevant.  Like most of you, I have a mix.  Some Snap-On, Craftsman, etc.  

 

I've had a combination end wrench set from Tekton for a couple years now.  I'd say the fit on fasteners and finish of the wrenches are on par with any of the best.  I can highly recommend Tekton. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Missing thrust bearing? And oil selection

      By KARNUT · Posted

      I find it amusing the OP doesn’t realize this threads heading includes several engines. He should have posted in the off topic section if he wanted a more narrow focus. I really appreciate and find amusing that he actually pointed out one of my many vehicles. The Odyssey. That happens to use 0-20 oil. I love pushing his buttons. 
    • Black02Silverado
      Missing thrust bearing? And oil selection

      By Black02Silverado · Posted

      Maybe, but it seems he is the only one that has backed up data to prove what he is stating. I think he is doing this more because he enjoys it and wants to get the information out to us. He's got the knowledge and access to the proper equipment and having the funds doesn't hurt.  I would love to do what he is doing and would do it if and when I hit the Powerball.  I'm not a Tribologist by any means but love to learn what I can.   I would bet there would be doubting people out there if a completely independent lab with high quality work and highly respected in the automotive industry, put out information like this.  The world can't be pleased, one just has to take the information that they are given, do more of their own research to find actual lab data to back up what they are trying to figure/find out.  Most don't bother, they just want to believe what they first see.     I don't have the minimax but my 6.2 in my 2019 Silverado with 64k miles shows excellent UOA results with 0w-20 and for my own purposes 5w-20.  Since not much of a change using 5w. I liked the data sheet information on the SS 5w-20 and figured I would give it a try.  Still the same viscosity at 100℃.   In the end we all just do what makes us happy, life is too short to get upset over trivial social media.   On a side note, I do feel GM has dropped the ball and just cares about the bottom dollar and not quality anymore.  "Like a Rock" has been long gone.  Seems "Built Ford Tough" has as well.
    • Tyler Gibbs
      Thoughts on these wheels?

      By Tyler Gibbs · Posted

      Better than stock but that's like putting lipstick on a pig
    • flattop
      2026 sierra bad brake controller

      By flattop · Posted

      Hello, my 3 month old Sierra Elevation wont recognize a trailer with electric brakes? All the lights work correctly, but no power to the brakes?   This is the factory installed brake controller. If you manually push the knob, the display shows the power % but does not light up like my 2022 silverado.   I have an appointment with the dealer, but was checking to see if anyone else has seen this issue.    Thanks, 
    • Black02Silverado
      Post your latest oil change.

      By Black02Silverado · Posted

      Been using SS 0w-20 from new, but wanted to change to the 5w-20 because I liked the data on the data sheet, to me it seems like a little better product. But as you can see, not much difference. This is also with running a mix of 10 gallons E85 to a tank topped with 93. It isn't a flex fuel vehicle so any higher I get a CEL for running lean on both banks. Yes my mileage takes a hit. Instead of 20 mpg I normally get on trips I get 17mpg. This is also using EaO17 filter.  What is amazing is I have the AMSOIL cone filter on it since I have the GM Performance intake installed and that air filter has 44k miles on it.  I just take it out and shop vac it off once a year.  I use the upholstery tool on my shop vac.  Works well.   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...