Jump to content

Steering wheel buttons

ElectriHolstein
 Share

Recommended Posts

Bigchunk27 New Member

Bigchunk27

Posted
Posted
On 6/25/2020 at 10:13 PM, Stand By said:

Have you contacted White's or anybody to see if it could be programmed?

 

On 6/25/2020 at 8:51 AM, Zelas said:

I Have swapped out my Steering wheel with a Leather wheel which has the Buttons on the right. I also have swapped the Speedometer with a High Country one. It does not work . The Cruse control buttons work however, I have to reinstall my old speedometer because I am not able to toggle thru the menus. Its a bummer because it makes a huge difference in the interior.

I think you also have to swap the 7” monitor functions out for the 8” display model. That also carries all the information for this switch to happen. I have tried this but I’ve wanted too so bad.

  • 3 months later...
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Mac-427
Mac-427

After researching the addition of radio controls on the steering wheel, I've concluded it can't be done without a huge hassle and expense.  As an alternative, I swapped in the leather steering wheel a

Zelas
Zelas

I Have swapped out my Steering wheel with a Leather wheel which has the Buttons on the right. I also have swapped the Speedometer with a High Country one. It does not work . The Cruse control buttons

Stand By
Stand By

Have you contacted White's or anybody to see if it could be programmed?

Posted Images

Michael Heyne New Member

Michael Heyne

Posted
Posted

Did anyone find a way to add the buttons on the right?  Just got my 2021 2500HD Base and it doesnt have the volume on the right either.  The blank is there.  Can it be added?  

Mac-427 Enthusiast

Mac-427

Posted
Posted (edited)

 

After researching the addition of radio controls on the steering wheel, I've concluded it can't be done without a huge hassle and expense.  As an alternative, I swapped in the leather steering wheel and used the blank on the right side of the stock wheel that came on my 2020 Silverado Custom.  I have Katzkin leather seats so I wanted a leather wheel to match so at least I have a nice steering wheel instead of the cheezy plastic stock version that came on on the Custom trucks.  The cruise control buttons on the new wheel work fine.

 

New Leather Wheel.jpg

Edited by Mac-427
  • Like 2
  • 4 months later...
Ted Vargas New Member

Ted Vargas

Posted
Posted

Someone on YouTube added the steering wheel controls on a 2021 Silverado custom.  And harness dr has the line bus harness to add steering wheel controls. But I believe you have to upgrade the cluster as well and swap steering wheel.   

Vradcliffe Enthusiast

Vradcliffe

Posted
Posted

I was able to work with the Harness Dr on my 2021 Sierra 3500 base, to get this working. I added the programmed cluster from WAMS, a steering wheel with the menu controls on the right and audio controls on the back. We added 1 wire (now available on Harness Dr website), which required no splicing, pinned at the cluster and pinned at the clock spring harness and this gave my wheel full control. Well worth while upgrade. 

Mac-427 Enthusiast

Mac-427

Posted
Posted
22 hours ago, Vradcliffe said:

I was able to work with the Harness Dr on my 2021 Sierra 3500 base, to get this working. I added the programmed cluster from WAMS, a steering wheel with the menu controls on the right and audio controls on the back. We added 1 wire (now available on Harness Dr website), which required no splicing, pinned at the cluster and pinned at the clock spring harness and this gave my wheel full control. Well worth while upgrade. 

Hey Vradcliffe, this is a  pretty big deal for lots of us on the Forum.  Any additional detail would be sincerely appreciated.

Vradcliffe Enthusiast

Vradcliffe

Posted
Posted

Hey Mac-427, I’ll try to add some detail so forgive the long post....

the first thing I would do is remover the upper steering column cover, to expose the clockspring harness (yellow connector). If you remove the harness, you can verify if there is any existing LIN bus connection (slot 9). If there is no connection, you should be able to run a wire directly from slot 9 at the clock spring along the existing harness to slot 20 at the cluster connector. I would really recommend going to the Harness Dr. website and purchasing the wire for $26. It will come with full instructions (many of the pics are from my upgrade, just saying that as verification it worked) and it is pinned perfectly to fit in the slots. 
 

Just as an FYI, I DID NOT replace the clock spring, as I’ve seen many people believe that may be necessary for this upgrade. 
 

This upgrade has had at least 2 additional successful attempts that I’m aware of, to this point. 

98E76793-54C1-4208-99E5-49B3DDA2C077.jpeg

8C916651-6C57-451F-B425-F0040B1E1665.jpeg

Mac-427 Enthusiast

Mac-427

Posted
Posted

Thanks Vradcliffe.  I'm following this issue closely because I have the steering wheel controls that came with my replacement leather wheel so I'm at least part of the way there.

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

@Vradcliffe,

 

Thanks again for your involvement in this.  Your patience and dedication to see this to fruition is greatly appreciated.  
 

Foe those looking into this, the harness can be purchased here.

 

https://harnessdr.com/product/2019-2021-silverado-sierra-steering-wheel-lin-bus-harness/
 

A few things to note:

 

A new compatible cluster swap is needed.  The new cluster needs to be custom programmed by WAMS - 2019+ (T1) Denali / High Country Cluster Upgrade Kit - White Automotive & Media Services - @GTPprix is the only company I use for this type of work.  

 

Since a new cluster is needed, might as well upgrade to the nicer Denali or High Country Cluster.    

 

A few customers have also reported that they gained radio controls (IOR) radios and have restored backlight illumination on the left side. 
 

Keep in mind, that this is still a fairly new retrofit and release - so individual results may vary. 
 

Thanks!

  • 3 weeks later...
Yep New Member

Yep

Posted
Posted
On 6/9/2021 at 12:43 PM, Vradcliffe said:

Here are the before and after photos....

I apologize, the before photo is the dealer stock photo, I didn’t take one prior to the install...

81C031C8-AC37-4B88-BB97-EA52E84D4180.jpeg

F2C8BC50-0DBD-4AB4-9197-1F8A8E27F249.jpeg

 

 

That does make for a great look. Would happen to have the website where you ordered the parts?

Thanks!

Flatblack83 Enthusiast

Flatblack83

Posted
Posted (edited)

I completed this and everything works except the heated wheel. Ordered a high country cluster from whites, wire from harness dr and a wheel from the dealer. Cost me about 1k to complete. Yes that's alot but its really nice..!! Since it's a custom the stereo bezel didn't match, I ordered the silver one to match.

20210617_181111.jpg

Edited by Flatblack83

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
    • Coastie05
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Coastie05 · Posted

      Hope it all works out for you. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...