Jump to content

Right front speaker rattle. Factory or aftermarket replacement?

Jav_eee
 Share

Recommended Posts

Jav_eee Enthusiast

Jav_eee

Posted
Posted

I have the Bose system and my front right speaker rattles. I’m wondering if it’s worth the trouble (and possible damage) to get it repaired at the dealership or if I should just upgrade speakers. I read that Bose has weird ohm specs for their speakers so maybe a factory replacement would be better?

 

 

Sent from my iPhone using Tapatalk Pro

hotrodz37 Senior Enthusiast

hotrodz37

Posted
Posted

I have the Bose system and my front right speaker rattles. I’m wondering if it’s worth the trouble (and possible damage) to get it repaired at the dealership or if I should just upgrade speakers. I read that Bose has weird ohm specs for their speakers so maybe a factory replacement would be better?
 
 
Sent from my iPhone using Tapatalk Pro

Is it the one in the door or the one on the dash?


Sent from my iPhone using Tapatalk
Jav_eee Enthusiast

Jav_eee

Posted
  • Author
Posted

Is it the one in the door or the one on the dash?


Sent from my iPhone using Tapatalk

Right front door.


Sent from my iPhone using Tapatalk Pro
hotrodz37 Senior Enthusiast

hotrodz37

Posted
Posted

Right front door.


Sent from my iPhone using Tapatalk Pro

Hmm, can’t help you there. Mine was on the passenger dash speaker. There was a screw loose holding it in that was rattling. It still rattles a little so eithe the screw is backing out now or it’s the cheap plastic grille that’s over it.


Sent from my iPhone using Tapatalk
  • Like 1
bullet3z Enthusiast

bullet3z

Posted
Posted

First I would get it fixed under warranty. That way it is done and free to you. Then, if you want to upgrade to aftetmarket speakers. You can do so knowing you can always go back to the functioning factory setup if needed. 

  • Like 2
Jav_eee Enthusiast

Jav_eee

Posted
  • Author
Posted
First I would get it fixed under warranty. That way it is done and free to you. Then, if you want to upgrade to aftetmarket speakers. You can do so knowing you can always go back to the functioning factory setup if needed. 



That’s what I’m thinking.

I may take the panel off and look for a loose screw because of hotrodz37 experience...


Sent from my iPhone using Tapatalk Pro
OnTheReel Senior Enthusiast

OnTheReel

Posted
Posted

Yeah, more than likely not a defective speaker. I had a ton of rattles in my door panels. Put down some Dynamat, felt tape anywhere it would potentially vibrate, etc. Was able to get most of the rattles squared away. Adding the Kicker sub cleaned up the rest being able to lower the bass on the HU and take some of the load off the doors. Annoying that the system is configured this way. Wish they would have put a better sub in the console and left the doors to mid-bass only.

  • 2 weeks later...
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted

Hi, Jav_eee. We recommend contacting your dealership to further look into this for you, if you haven't already. Our team would be more than happy to connect with them. To do so, please send an email to [email protected] ATTN: Jav_eee/GMTrucks with your contact information, VIN, and preferred dealership. We look forward to hearing from you. To learn more about GM's privacy policy, please visit http://bit.ly/2h3ZUnC. 

 

Aleigha W. 
 

Jav_eee Enthusiast

Jav_eee

Posted
  • Author
Posted
Hi, Jav_eee. We recommend contacting your dealership to further look into this for you, if you haven't already. Our team would be more than happy to connect with them. To do so, please send an email to [email protected] ATTN: Jav_eee/GMTrucks with your contact information, VIN, and preferred dealership. We look forward to hearing from you. To learn more about GM's privacy policy, please visit http://bit.ly/2h3ZUnC. 
 
Aleigha W. 
 


Can I send you pics of all the invoices for the warranty work I’ve had done in the first 3 weeks of owning it? [emoji3061]



Sent from my iPhone using Tapatalk Pro
  • Like 1
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
14 minutes ago, Jav_eee said:

 


Can I send you pics of all the invoices for the warranty work I’ve had done in the first 3 weeks of owning it? emoji3061.png



Sent from my iPhone using Tapatalk Pro

 

Absolutely!

 

Aleigha W.  

  • 4 years later...
JMONT New Member

JMONT

Posted
Posted

I know this is an old post, but what did you figure out? My right front door bose speaker in my 22 HC sounds like a fart sack at certain frequencies, low base. I dont listen to high volume.  Still under warranty.

kickass audio Enthusiast

kickass audio

Posted
Posted
56 minutes ago, JMONT said:

I know this is an old post, but what did you figure out? My right front door bose speaker in my 22 HC sounds like a fart sack at certain frequencies, low base. I dont listen to high volume.  Still under warranty.

if yours is a plastic rattle sound I fixed it on both my front doors. The passenger door was by far the worst at mid to high frequencies where I could hear the door rattling.

 

Playing the same song on repeat I sat in the passenger seat and played with the door and found that pushing slightly on the top right corner of the speaker grille I was able to stop the rattling noise. I first tried to loosen up the pair of screws that are inside the grab area of the door by the arm rest and push the door in as far as it could go and screw it back down but it didn't help. I removed the door panel and tightened all the screws that you see from the inside area of the door but it didn't help. I then noticed the plastic bubbles the factory uses to secure each layer of plastic in the door had a few that were loose. Those bumps look like half of a M&M or skittle and I was able to see the play in each one of those nubs by pushing and pulling on the panel from the opposite side. Once I found each one that was loose I put some CA glue (super glue will do) on the spot and sprayed a little bit of acetone to accelerate the cure time and reinstalled the panel with no more rattling.

 

My drivers door was a similar sound with plastic rattling but I pinpointed the noise to the top left corner of the door panel closest to the plunger that goes up and down to show your door lock status. Slightly pushing on that area stopped the rattle. I performed the same fix of locating every loose plastic weld bump on the inner part of the door panel and my problems have been fixed for 2 weeks now.

 

My only other rattle noise is in the dashboard where the front defroster cover is rattling against the windshield. I didn't get to mess with that this year but will likely do it next summer since I don't like playing with plastics when it's cool out.

dieselztrucking New Member

dieselztrucking

Posted
Posted

With the Bose system, it's true that their speakers often have unique impedance (ohm) ratings, typically lower than standard aftermarket speakers. This can make direct aftermarket replacements tricky because mismatched impedance could affect sound quality or even damage the amplifier.

Here are your options:

1. Factory Replacement: Replacing the speaker with a factory Bose speaker at the dealership ensures compatibility and maintains the system's integrity. This might be a simpler, safer choice since it preserves the balance and sound Bose designed for your vehicle.

2. Upgrade: If you're open to upgrading, it’s important to research aftermarket speakers that match the impedance of your current system (likely around 2 ohms). A professional car audio shop could offer an upgrade solution that works well with the Bose amplifier and enhances sound quality without risking damage.

If you're looking for the safest option with minimal hassle, a factory replacement might be the best route. However, if you're seeking better sound quality, upgrading could be worth it with the right match.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • silveradosid
      Replacing 2.7L on 2021 Silverado with 2023 2.7L

      By silveradosid · Posted

      same here , i have a 2020 first gen and the cost to repair these engines far excedes replacement
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      But Grumpy I did show several subdivisions that had homes starting in the 170K range. If you bought a Townhouse or Condo you could go cheaper. Same with a car 3000 dollars in the 70s translates to around 20K today. There are several models at that price. You actually get more for the money. In the 70s I drove a 3000$ car bought a 28K home and made 4.50 per hour. Thank goodness for overtime. Today I could buy a 170K house drive a 20K car and make 25 dollars an hour operating the same machine today. The difference the house, car, machine would be better and have AC. And I wouldn’t be taxed on overtime. And statistically your wife works too. Easing the burden. I thought we agreed to disagree. I brought receipts earlier, showing examples. I think you’re more stubborn than me. I was done with this debate. 
    • Coastie05
      Replacing 2.7L on 2021 Silverado with 2023 2.7L

      By Coastie05 · Posted

      I’m definitely interested to hear the end result here. 
    • MASONV88888888
      Another 6.2L engine failure!

      By MASONV88888888 · Posted

      My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...