Center Console Insert Dimensions

Ravenkeeper · April 16, 2020

I'm looking for detailed dimensions of the various inserts, for inside the box on the full length center console. I have a mod/project in mind, but need to know the length/width of the bigger portions.

EDIT: Please also let me know how deep they are too.

Edited April 16, 2020 by Ravenkeeper
Depth Measurement Request

VanguardK2 · April 16, 2020

You have me interested in hearing what the mod is now... also here are your measurements for one of two trays listed. I unfortunately don't own the other one. Would have been more accurate and in MM if my digital caliper wasn't at the Toyota dealership in my toolbox...

Subbed to the thread. Would love to hear about the mod..

Cheers

Ravenkeeper · April 16, 2020

11 hours ago, VanguardK2 said:

You have me interested in hearing what the mod is now... also here are your measurements for one of two trays listed. I unfortunately don't own the other one. Would have been more accurate and in MM if my digital caliper wasn't at the Toyota dealership in my toolbox...

Subbed to the thread. Would love to hear about the mod..

Cheers

Glad that you threw the depth measurement in there, forgot to ask for that one. THX!!!

VanguardK2 · April 16, 2020

For sure man, I had 20 minutes and got bored. Interested in the mod, so I'll be lurking around here lol

Sent from my SM-N975U1 using Tapatalk

BigBlue2014 · April 20, 2020

I have the Deeper, 2-pocket insert in my console. I will try to get you dimensions a little later when I have time to get out to the truck.

Ravenkeeper · April 22, 2020

On 4/20/2020 at 8:00 AM, BigBlue2014 said:

I have the Deeper, 2-pocket insert in my console. I will try to get you dimensions a little later when I have time to get out to the truck.

I want to say that Amazon has it at 7".

On 4/16/2020 at 12:50 PM, VanguardK2 said:

For sure man, I had 20 minutes and got bored. Interested in the mod, so I'll be lurking around here lol

Sent from my SM-N975U1 using Tapatalk

Going to use one of them to mount my CB and scanner inside the center console box. Unless I find someone between now and then with a '14/'15 full length center console that they want to swap for the one in my '18.

VanguardK2 · April 22, 2020

Going to use one of them to mount my CB and scanner inside the center console box. Unless I find someone between now and then with a '14/'15 full length center console that they want to swap for the one in my '18.

Oh was your 14/15 center console for the removable cupholder, were you planning to mount the CB underneath it? Also thanks for @ mentioning me to fill me in. It sounds like a pretty sweet idea.

Sent from my SM-N975U1 using Tapatalk

Ravenkeeper · April 22, 2020

21 hours ago, VanguardK2 said:

Oh was your 14/15 center console for the removable cupholder, were you planning to mount the CB underneath it? Also thanks for @ mentioning me to fill me in. It sounds like a pretty sweet idea.

Sent from my SM-N975U1 using Tapatalk

My 15 had the moveable cupholder and my CB and scanner was between the cupholder (in the forward most position) and the center box. Now, I'm looking at mounting them inside the box.

VanguardK2 · April 23, 2020

My 15 had the moveable cupholder and my CB and scanner was between the cupholder (in the forward most position) and the center box. Now, I'm looking at mounting them inside the box.

Oh okay gotcha. TinkeringFox had a video on youtube on how to turn the gen2 console with non movable cupholder into one that moves. I personally want a 14/15 upper so I can just move the cupholders away. That will eventually be where I keep my handgun.

Sent from my SM-N975U1 using Tapatalk

Ravenkeeper · April 23, 2020

3 hours ago, VanguardK2 said:

Oh okay gotcha. TinkeringFox had a video on youtube on how to turn the gen2 console with non movable cupholder into one that moves. I personally want a 14/15 upper so I can just move the cupholders away. That will eventually be where I keep my handgun.

Sent from my SM-N975U1 using Tapatalk

I was looking for either a full console, from a 14/15, or the upper half of the front. I would like to keep the cupholder, so I'm resorting to put them in the box. I'm also looking for an inexpensive way to keep them cool, maybe a couple/few fans, and/or maybe ducting some AC to them, we'll see.

VanguardK2 · April 23, 2020

I was looking for either a full console, from a 14/15, or the upper half of the front. I would like to keep the cupholder, so I'm resorting to put them in the box. I'm also looking for an inexpensive way to keep them cool, maybe a couple/few fans, and/or maybe ducting some AC to them, we'll see.

That wouldnt be a bad idea using the AC ducting but it would have significantly adverse effects come winter when your heater goes full blast on 90... so youd have to account for that. I'd vote for PC fans. They can be had for 5-12 bucks, and you can simply splice them into a wire powering your radios. I think youd be able to measure the temperatures to find out if a pc fan would do the job

Sent from my SM-N975U1 using Tapatalk

Ravenkeeper · April 14, 2021

On 4/15/2020 at 8:25 PM, Ravenkeeper said:

So I had ordered the insert (pictured above), received it, built my workbench, and started to do the CB/Scanner mount in the center console like I wanted to. BUT, I laid both radios with the insert, and outer most measurement of the insert is the same as both radios. Time for a new plan or finding a way to alter this plan to work.

Ravenkeeper · April 14, 2021

4 hours ago, Ravenkeeper said:

So I had ordered the insert (pictured above), received it, built my workbench, and started to do the CB/Scanner mount in the center console like I wanted to. BUT, I laid both radios with the insert, and outer most measurement of the insert is the same as both radios. Time for a new plan or finding a way to alter this plan to work.