Jump to content

Recommended Posts

Posted
On 5/10/2025 at 3:32 PM, GETGONE said:

 

I've run mine to 112 countless times with zero issues. 31K miles and still going strong. Took it to a test and tune and ran about a dozen passes trying various launches, no issues. Best of 14.2 in the 1/4.

 

Nice time!  If memory serves, that 112 mph problem applied to K2 1500s.  I recently learned that my kids have been exceeding 112 with their GMT900s with 6.2s too!  

Posted (edited)

Driveshaft seems to get a lot of the press, but tire speed rating should be looked at too. 

(yes, I realize that exceeding speed rating isn't likely to cause immediate failure...)

 

Do they know about tire speed ratings? 

 

Speed (and load) rating will also be on the tire.

Factory tires on my '21 were speed rating S.

 

image.png.5304200992d5297646c02b5c85367739.png 

 

 

S

An S speed rating indicates the tire has been approved for speeds up to 112 mph (180 km/h) under optimal conditions. Everyday passenger vehicle tires can be S speed rated, but S tires often prioritize specific performance or function. Many all-terrain LT tires are becoming available in an S rating as that’s the OE spec for many of these vehicles like the Ford Raptor. 

 

 

This is was on a set of Duratracs I used to have.

Load load rating 109, speed rating S

image.png.a570718ea773e27958721328faf017bd.png

 

 

Current '23 has  275/60R20 115S 

So again, speed rating S 

 

My current winter tires are speed rating R.

 

Speed rating R allows for speeds up to 106 mph (170 km/h) under optimal conditions. Like Q, R tires generally prioritize a particular function or unique performance over maximum speed capability. R speed tires are rare but can be found on some heavy-duty light truck (LT) tires, as well as studdable and studless winter tires.

 

Edited by redwngr
Posted

 

Speed Rating Miles/Hour KM/Hour Typical Application(s)
L 75 120 Trailer tires
M 81 130 Spare tires
N 87 140 Spare tires
P 93 150  
Q 99 160 Select winter tires
R 106 170 Passenger and light truck tires
S 112 180 Passenger and light truck tires
T 118 190 Passenger and light truck tires
U 124 200  
H 130 210 Passenger sedans, coupes, SUV and CUV’s tires
V 149 240 Performance sedans, coupes, and sports cars tires
W 168 270 Performance sedans, coupes, SUV and CUV’s tires
Y 186 300 Exotic sports cars tires
Z 149+ 240+ High-Performance vehicle tires
  • Like 1
Posted

Trail Bosses with the 18" tires are electronically limited to 98mph due to tire rating. The 20" wheel option bumps the limiter up to 112mph because of the S speed rated tires.

Posted
3 hours ago, swathdiver said:

 

Nice time!  If memory serves, that 112 mph problem applied to K2 1500s.  I recently learned that my kids have been exceeding 112 with their GMT900s with 6.2s too!  

LOL. Busted.

 

My 2000, GMT800, that I still have, has a 128 limit. I have seen 4000 rpm`s in overdrive with 16 inch wheels and 3.73 gears. Poor 100 mph speedo.

  • Like 1
Posted (edited)
16 hours ago, PunchT37 said:

LOL. Busted.

 

My 2000, GMT800, that I still have, has a 128 limit. I have seen 4000 rpm`s in overdrive with 16 inch wheels and 3.73 gears. Poor 100 mph speedo.

I'm curious what the tire loading label on the doorpost lists as the speed rating?

Edited by redwngr
Posted
1 hour ago, redwngr said:

I'm curious what the tire loading label on the doorpost lists as the speed rating?

S. But, this truck has a whole new computer.😉

Posted
4 hours ago, PunchT37 said:

S. But, this truck has a whole new computer.😉

 

Thanks.

 

So if they were installing S rated tires on (at least some) 2020's the original limiter was likely lower/

 

 

 

 

Posted
4 hours ago, redwngr said:

 

Thanks.

 

So if they were installing S rated tires on (at least some) 2020's the original limiter was likely lower/

 

 

 

 

 

4 hours ago, redwngr said:

 

Thanks.

 

So if they were installing S rated tires on (at least some) 2020's the original limiter was likely lower/

 

 

 

 

Factory limiter on that 2000 truck was 96 mph.

  • Thanks 1
  • 5 months later...
Posted (edited)

I have yet to top mine out since I had it unlocked and then tuned it (High Country 6.2 10 spd), but my tires will limit me as I have a brain. But damn the ecm and tcm tune feels great. If anybody is on the fence, just do it. I'm still tweaking some of the shift times to get rid of the sluggish shifts on lower power shifts. mid power shifts are .200 seconds and full power are .100 seconds, tires chirp with only a small boost in pressure and reducing shift times.

Edited by Silveradgo
Posted
10 hours ago, Silveradgo said:

I have yet to top mine out since I had it unlocked and then tuned it (High Country 6.2 10 spd), but my tires will limit me as I have a brain. But damn the ecm and tcm tune feels great. If anybody is on the fence, just do it. I'm still tweaking some of the shift times to get rid of the sluggish shifts on lower power shifts. mid power shifts are .200 seconds and full power are .100 seconds, tires chirp with only a small boost in pressure and reducing shift times.

Who tuned it and how much did it cost you?

Any mods beside the tune?

Posted (edited)

I tuned it. Only have a K&N Blackhawk intake on it for the sound. Longtubes will be the next go-fast mod.

 

Edit: I'll have to get a video of the induction noise during the 1-2 shift at like 4.5k 🤤

Edited by Silveradgo
Posted

How did you tune it since you have to send in the ECM last I knew to get it unlocked to be able to tune it.

Posted
8 hours ago, GETGONE said:

How did you tune it since you have to send in the ECM last I knew to get it unlocked to be able to tune it.

See my earlier post

Posted
4 hours ago, Silveradgo said:

See my earlier post

You have 3 posts. You just said you had it unlocked and you tuned it. That tells me NOTHING. WHO unlocked it? WHAT are you using to tune it? New member sounds like a troll.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I know; crap pictures.   Anyway, as a finale of sorts to this thread, I had replaced both differential covers and since they had the capability of adding temperature probes, I did that. These are MaxTow analog/digital gauges with stepper motors. They'll flutter around like crazy for a moment and start at a nominal 100 degrees Fahrenheit.   I drove a 30-mile loop to the grocery store, averaging 70 MPH (as much as 80 to see if there was a quick spike in temperature. The air temperature is 102 (ambient ?). but the first pic is 7 miles into the trip. The second is getting back into the truck after leaving the store; differential temperatures dropped about three to four degrees in 15 minutes. The third pic in on the road to my house, about a mile away.   In that run, I saw a high of 150F on the rear differential, and 121F on the front. I'm sure a longer drive or towing will see higher than that, and when that happens, I can update the observations. 
    • You don't want to become predictable now, do you? 😏
    • Fully warm, coolant temp >194, closed loop.   Run time can be anywhere from just reached operating temperature to having driven 30+ miles.   The O2 chart (which is a feature I just discovered after reading) for the bad idle seems to be "most" of the time. For the little time I've been watching it (scanning and driving! watchout!) I can't seem to isolate any cause or condition yet.   It definitely idles rougher sometimes than others and so far what I've seen is the rougher idles are always rich. But not enough to set a CEL.   In other news I replaced the starter solenoid. Everything on this truck is such a PITA. Starter "snout" is mangled up with the torque converter inspection cover which is tangled up with hard cooling lines and the driveshaft. But I got 'er done without too much swearing...I just go into everything now knowing it's going to be a frustrating mess.   The starter solenoid replacement kicks off the next round of work: AC, injector rebuild, cat, exhaust. I'm just going to do it all. But first:   I don't know what my fuel pressures are. I can't definitively say the issue is the injector without first verifying fuel pressures and any leakdown. I "rented" a test kit ($199.99 at O'Really's ...intentional misspelling). They don't "rent" tools anymore, they charge you for the tool and then you return it when you're done. No joke. It is listed as a rental on the receipt but the guy told me there's no difference between renting and buying  now, you just return it when you're done and they refund the credit card. Mmmkay, whatever.   I will rule out fuel pressure issues (too much), and any leaking (that's how I'll know the problem is inside the intake). I think someone said the return line could be plugged or not flowing and that could cause high fuel pressure (and too much fuel being pushed through injectors). I'll cross that bridge if I get high readings.   As of now I'm ready to tear off the intake cover, extract the injector, and have it sent off to be rebuilt just so I can rule that out.
    • What are the conditions of this rich idle? Warm or cold engine? Run time? Does every idle look like this or only sometimes?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...