Jump to content

Protect tailgate from forklifts

DrScience
 Share

Recommended Posts

DrScience New Member

DrScience

Posted
Posted

Hey, new to this forum. I’ve had a few Silverados and a Colorado over the years and Just picked up a 2020 Silverado. I use this it to pick up pallets of grain once week or so. Inevitably the new kid at the warehouse will bump the forklift into the tailgate resulting in a bunch of ugly dents generally not worth fixing but really annoying. 
 

I’ve searched over the years but never found any type of mod to protect the tailgate so thinking of diy-ing it. Something like a length or pvc with insulation wrapped around it that can hang by straps and hooks right over the end of the tailgate when down. Or a length of 2x4 with rubber.  Removable so it just sits in the bed when not in use.

 

anyone seen any kind of mod to protect the tailgate or made one themselves? I’d rather not have to use a trailer. 

DrScience New Member

DrScience

Posted
  • Author
Posted

I’ve been usually watching and guiding them from hitting the wheel wells on the much more narrow Colorado but I guess that won’t be a problem. Maybe it’s as simple as that. But seeing as they are usually somewhat or completely high I’d still like a guard lol.

topgear1224 Enthusiast

topgear1224

Posted
Posted

You can always remove the tailgate it's not that difficult.

all the other ones more than likely the forklift operator seems like I'm good and hit harder than you would if it was just your tailgate which is probably going to result in a bent tailgate instead of a dinged up tailgate.

if you're insisting on DIY and you can always split open some pool noodles and create a little bumper over the top of the entire tailgate.

Sent from my SM-N975U using Tapatalk

DrScience New Member

DrScience

Posted
  • Author
Posted
2 minutes ago, topgear1224 said:

You can always remove the tailgate it's not that difficult.

all the other ones more than likely the forklift operator seems like I'm good and hit harder than you would if it was just your tailgate which is probably going to result in a bent tailgate instead of a dinged up tailgate.

if you're insisting on DIY and you can always split open some pool noodles and create a little bumper over the top of the entire tailgate.

Sent from my SM-N975U using Tapatalk
 

Good suggestion. Thanks

davester Senior Enthusiast

davester

Posted
Posted (edited)

If the person is ramming your truck hard enough to dent the end of the tailgate, a pool noodle isn't going to make a difference other than making the end of the tailgate more visible (which likely is a good thing anyway).  You could put a strip of angle iron across the length of the tailgate, but that'll just move where the damage can happen (as then it could just push in the end of the tailgate more evenly across the tailgate, or it could do something like bend the tailgate hinges instead).

 

Edit:  Alternately, the pool noodle is a bad thing, because it gives the operator something to aim at...

Edited by davester
Chrisj4 Enthusiast

Chrisj4

Posted
Posted

When I read this title I thought it was going to be a joke about the exhaust...haha

  • Like 2
  • 6 months later...
ericarenee Enthusiast

ericarenee

Posted
Posted

Make him pay for it. I Bet he will not hit it a second time. They load pellets of tile. Mortar and often lumber and never damage nothing on my Trucks or  Vans. My thinking is personal responsibility. Tell them they hit it they buy it , if they do not like the ideal let them load it by hand. 

 

 

Sorry to sound mean but its not that difficult. 

 

but getting a metal grill type tailgate might be the best answer , Like the ones for 5th wheel hitch

eppieguy Senior Enthusiast

eppieguy

Posted
Posted

I grew with the above, they damage it, they pay for it, it will only happen once. 

Imcrazy Senior Enthusiast

Imcrazy

Posted
Posted

Take a 2x6 as wide as your tailgate and screw a 1/4” piece of plywood to it that is the same size of your tailgate plus the width of the 2x6. Then just set that on the tailgate before they load.


Sent from my iPhone using Tapatalk

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)

Spray in bed liner?

Plastic throw-in bed liner? 

Factory painted bed floor? 

Worried about bed floor scratches or just tailgate getting dented when folded down. 

42" x 48" pallet (or similar)?

 

I've loaded 100's of pallets with similar loads and don't think I've ever hit a tailgate.  

 

Maybe the forklift/forks are too small for the pallet size and load being handled?

It's not tough to set a pallet partway in and get another bite to push it the rest of the way -- while staying safely away from the tailgate (or bumper, if tailgate has been removed).

 

 

 

 

 

 

 

Edited by redwngr
  • Like 1
  • Thanks 1
Imcrazy Senior Enthusiast

Imcrazy

Posted
Posted
Spray in bed liner?
Plastic throw-in bed liner? 
Factory painted bed floor? 
Worried about bed floor scratches or just tailgate getting dented when folded down. 
42" x 48" pallet (or similar)?
 
I've loaded 100's of pallets with similar loads and don't think I've ever hit a tailgate.  
 
Maybe the forklift/forks are too small for the pallet size and load being handled?
It's not tough to set a pallet partway in and get another bite to push it the rest of the way -- while staying safely away from the tailgate (or bumper, if tailgate has been removed).
 
 
 
 
 
 
 

Agreed on the fact that the operator should be capable, have run lift trucks for 15+ years and never damaged a vehicle but, have seen other experienced guys do it a few times. It’s carelessness IMO not lack of skill.


Sent from my iPhone using Tapatalk
  • Like 1
  • Thanks 1
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   5 Members, 0 Anonymous, 1,428 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Grumpy Bear
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Grumpy Bear · Posted

      Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • TrueBlue
      No Software Updates - Old Build

      By TrueBlue · Posted

      That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...