Jump to content

Turning off Automatic headlights

Zimmski_Bud
 Share

Recommended Posts

Zimmski_Bud Enthusiast

Zimmski_Bud

Posted
Posted

Been tirelessly searching the internet on ways to turn off my automatic headlights in my 03’ sierra.

 

I want it to be manual, I realize this sounds pointless but hear me out, I ordered some switchback LED headlights that are white but if i turn my headlights off and on again they come on yellow for fog, snow, dust, etc.


Now during the day I can freely choose whatever setting I like but once the sun sets the autos turn on and nothing I do can change it. on my control panel there is an off, auto, park lights, and on. However the “off” position is spring loaded and bounces back to auto, I have yet to figure out what it’s for. It literally does nothing. 
 

I have tried the dome override button trick, it does not work. Now does my “off” position just not work and the problem is on my end? Or is the only way to turn these things off achieved by rigging it? 


Any suggestion helps, thanks.  

BC29C91E-B91C-40F2-8ACD-45FCD0EBB280.jpeg

davester Senior Enthusiast

davester

Posted
Posted

Yup, my trucks the same.  I don't really mind it, but it'd be nice to not flash the neighbors windows when I get home late at night.

  • Like 1
casey.mikl Enthusiast

casey.mikl

Posted
Posted

The off portion can be used when the truck is turned on. You can switch it down to off and they will stay off until you turn the knob back down and they will go back to auto. My 2011 is the same way.


Sent from my iPhone using Tapatalk

  • Like 2
diyer2 Senior Enthusiast

diyer2

Posted
Posted

On my 2012 I removed the switch.

Took it apart.

Removed the spring.

Now a manual switch.

:)

 

  • Like 1
Formulabruce Enthusiast

Formulabruce

Posted
Posted

yup , the spring or lift the dash pad and remove the sensor and cheat it to always daytime

davester Senior Enthusiast

davester

Posted
Posted
6 hours ago, casey.mikl said:

The off portion can be used when the truck is turned on. You can switch it down to off and they will stay off until you turn the knob back down and they will go back to auto. My 2011 is the same way.


Sent from my iPhone using Tapatalk

It might depend on the specific programming the truck gets, but for mine, turning the switch to off does nothing (either momentarily or holding it in the off position).

 

I've considered putting a switch inline with the dash sensor, but I'd be prone to leaving it disconnected, and in general I like that the lights go on/off automatically.

Zimmski_Bud Enthusiast

Zimmski_Bud

Posted
  • Author
Posted
12 hours ago, casey.mikl said:

The off portion can be used when the truck is turned on. You can switch it down to off and they will stay off until you turn the knob back down and they will go back to auto. My 2011 is the same way.


Sent from my iPhone using Tapatalk

 So there has to be some way to make the headlights think the truck is only turned “on” so that i can change these lights at will? Whatever that may be ?

Zimmski_Bud Enthusiast

Zimmski_Bud

Posted
  • Author
Posted
10 hours ago, diyer2 said:

On my 2012 I removed the switch.

Took it apart.

Removed the spring.

Now a manual switch.

:)

 

That may have worked for your year of truck, but the spring isn’t the thing stopping me from turning off my headlights. While the truck is running that “off” position does nothing. 

Zimmski_Bud Enthusiast

Zimmski_Bud

Posted
  • Author
Posted
6 hours ago, Formulabruce said:

yup , the spring or lift the dash pad and remove the sensor and cheat it to always daytime

I saw someone talking about if the sensor isn’t functioning properly that it reverts to a manual setting. But i don't know if this is true. 
 

07HD Enthusiast

07HD

Posted
Posted

On my 07 that sprig loaded position turns the headlights and all lights OFF'

Zimmski_Bud Enthusiast

Zimmski_Bud

Posted
  • Author
Posted
29 minutes ago, 07HD said:

On my 07 that sprig loaded position turns the headlights and all lights OFF'

You have the next gen, I really wish it was that simple for me. ?

jake111 Enthusiast

jake111

Posted
Posted

I'm not positive about our trucks, but for most (all?) vehicles just disconnect the light sensor on top of the dash.  Yes, I know "just disconnect" might not be the easiest thing to do . . . unless you're willing to burn your bridges and destroy it from above.

  • Like 1
StinkyCheese Senior Enthusiast

StinkyCheese

Posted
Posted

Interesting that turning it to off does nothing.  My 01, 06, and 09 all turn(ed) the lights off when I push(ed) the switch to off and stayed off until I reset them.  I think maybe because you're in Canada you're SOL.  Much like people trying to kill the DRLs on later generations, Canada trucks you couldn't turn the DRLs off.

  • Like 1
Zimmski_Bud Enthusiast

Zimmski_Bud

Posted
  • Author
Posted
I'm not positive about our trucks, but for most (all?) vehicles just disconnect the light sensor on top of the dash.  Yes, I know "just disconnect" might not be the easiest thing to do . . . unless you're willing to burn your bridges and destroy it from above.

[emoji23] just might have to burn that bridge bud, thanks!


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • teamjnz
      AWD conversion to Z71

      By teamjnz · Posted

      Sounds like converting will be a bigger endeavor than I was thinking. This truck doesn't have 2Hi like the Suburban did. The Tahoe has 4Hi and 4Lo and a button to turn of traction control.   From what I understand the Stabilitrak uses open diff in the front and rear. When wheel speed is not the same the stabilitrak uses the ABS system to slowdown the spinning wheel(s) to transfer power to the slower non-spinning wheel(s). I thought the transfer case was open too. Being able to transfer power either more to front or rear depending on wheel spin. Maybe I miss understood some information with you saying and power transfer is 50-50. Thanks
    • PunchT37
      OCI, not when but why?

      By PunchT37 · Posted

      My brother has a 2007 Avalanche with afm 5.3. It`s got 176,000 miles. Runs like a clock. Never been apart. Co worker has a 2010 Tahoe with afm 5.3. 230,000 miles. Never been apart. Runs like a clock. So, even though cyl deac is a weak spot, they can go the distance.   BUT, these engines had the oil changed regularly, AND had 5w30 as spec. I wonder if they would have lasted this far on 0w20? I`ll bet not.
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • davester
      Tranmission stays in Low

      By davester · Posted

      get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • asilverblazer
      OCI, not when but why?

      By asilverblazer · Posted

      This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...