Jump to content

cars...


pacodiablo

Recommended Posts

Posted

if you had to buy a car, what would you get?  imagine that you can afford anything.  NO SUVS, VANS, OR TRUCKS!

 

i would get a...

 

Jaguar X-Type 3.0 Sport or...

Jaguar XJR or...

Jaguar S-Type R or...

Ford Mustang Cobra or...

Ford Mustang Saleen or Roush

Posted

1. Porsche Carrera GT (558hp :( and great looks too)

2. Porsche 911 GT3

3. BMW M3 coupe

4. BMW M5

 

If I ever purchase a car it will be German.

 

Edit: Actually I have always wanted a Chevelle 454SS too.

Posted

Every BMW ///M model ever made

The Caddy Cien(if that's what they put the 750HP engine in, read my post)

67 Corvette 427 Roadster REd with black stripe(my all time favorite vette)

69 Camaro ZL-1

69 Corvette ZL-1

Hummer H1 with 8.1 Vortec

Get my truck to put out 650+ HP

Ferrari 575 Maranello

I could go on and on and on and on.....................

Posted

The scaryguys list is the same as mine minus the gto and impala.  Wierd thing is my dad owned a chevelle for a short period of time (it was stripped back in the 70s at work.  He came out after work and found it on blocks missing just about everything but the frame :( )

Posted

This list could go on forever. Being realistic when it comes time to get my wife a new car. I'm really going to push her towards either a Lexus 300 IS or the new caddy CTS. This is gonna be tough since she really wants an Envoy.

Posted

Hmmmm i would have to say.

1. Ford Mustang Jack roush or a Steve Saleen (Yellow)

2. Corvette Z06

3. 71 Chevelle 454 SS

4. 69 Camaro Z28 327

5. 85 or 86 Monte Carlo SS

 

I think the Saleen mustang is the one i would want out of all the others. It would have to be Yellow though. With a supercharger.

Posted

couple more turbo-t's or grand national's, one would be a crazy 8 second drag car. one would be setup for road racing, then put my current one back to perfect showroom condition.

 

then maybe a nice shinny vette just because.

Posted
This list could go on forever. Being realistic when it comes time to get my wife a new car. I'm really going to push her towards either a Lexus 300 IS or the new caddy CTS. This is gonna be tough since she really wants an Envoy.

I'd go with the CTS. Cause if your going to get a [super]sport sedan, there is no other choice than a BMW 3-Series. As The new issue of Automobile put it "in the sport sedan catagory, second place is all your allowed, because the BMW 3-Series has first all sewn up. It seems to win every comparison test is show up for. IT power-slides through the nightmares of rival suspension engineers. It casts a pall over the entire catagory, just as michael Schumacher strides the nigh podium of Formula 1 like a colossus. As with Schumacher, BMW has made the battle for first boring"

 

In fact I used to subcribe to 5 car magazines at once (3 at the end of this month) and I have never read an article of weere the BMW lost in the sport sedan catagory. OF course if your just a lexus person, I can start understand why you'd want one. barely.

 

Yes, I'm a shameless Bimmerphile.

Posted

If I had to get a car:

 

1997-1/2 to 2001 Pontiac Grand Prix GTP (what are the odds)

 

1st Generation Camaro, preferably '69

 

Chevy SSR

 

1987 Buick Grand National

 

1970 Chevelle SS

 

Perhaps a Nitro Fueled Funny Car  :(

Posted

Any version of the "M" BMW's.  At this point in my life an M5 would be the perfect car for me!!!  I don't need anything exotic, but this car would hang with anything on the road around here (well almost), and I could throw the wife and kids in there too if I wanted too.  :(

Posted

'02 Corvette Z06 done up by John Lingenfelter(sp?). That guy knows how to make stuff run!

 

'69 Ford Mustang Mach 1 (has to be manual)

 

'69 Plymouth Road Runner w\426 Hemi(also in manual)

Posted

1989 Oldsmobile Cutlass Supreme Int'l.

Because I have one with 197k miles, I love it and would not trade it for any other car.

 

If I didn't already have my Cutty, my dream car is a 91-92 Chevy Caprice.  Black, limo-tinted, bagged, LS1 engine swapped in, and rolling on chrome 20's.

 

I have simple taste in cars, but the expense for mods would cost more than a new M5 or S-Class!

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I bought belts and pulleys for my '20 L5P at Rock Auto a couple years ago. I have used them for many years, and almost always save significant money, especially when I buy maintenance stuff ahead of time.   They carry many OEM parts, which is all I use unless an aftermarket is shown to be same/superior, or if it is an insignificant part or unavailable OEM part anywhere else. RA is usually lower priced, often by a bunch, but parts are sometimes unavailable or out of stock, and I do shop around and sometimes find better prices at other sites.   Be aware that you pay shipping, and if you buy multiple items and they are coming from different warehouses, the shipping can kill the advantage. Planning ahead is best if possible.   If you have a transmission service in the near future, check out their OEM (AC Delco ULV) fluid, usually MUCH less than anywhere else.
    • New member here, very long time occasional guest. Saw this thread, thought it would be a good time to contribute someting. It is only my experience and not a claim that everyone will have the same.   I bought my '20 3500 L5P new and have put 99.9% (literally) of it's current ~400k miles on it myself, with over 50% of that towing loads between 4k to 15k, and to me this truck has been nothing short of amazing. For the first 235k I had zero issues, and from there until 321k I replaced a NOx sensor, two failing glow plugs, and three of the notorious injector connectors. I believe this truck is in part, a testament to good luck, but also good care and following a decent maintenance schedule (I also keep meticulous records.) As a result, it looks as good as a well cared for 70k rig, up and down, inside and out.   At some point before that 321k mile mark I began to get a little spooked about the 10L1000, especially the valve body. Word of mouth about potential issues prompted me to jump on the net to sift through all the noise and determine what all the fuss was about. I routinely take long trips, coast-to-coast and points in between, so roadside breakdowns can be '...a thousand miles from nowhere' and a bit of a challenge, and though I had no issues, my guard was up and activated.   And then I stumbled across a chance to salvage some parts off a new 2025 that had been wrecked in transport. I grabbed a few wear items (alternator, pulleys, etc.) and on a whim asked what the ten speeder would cost me. It was cheap...really cheap. I knew some changes had been made in the '24+ version 10L and were supposedly not compatible, but I called service/parts at my local Chevy dealer and asked why and they didn't know. A call to a well known aftermarket transmission outfit revealed it was very likely it would be fine, but to them not 100% sure.   Because it was cheap (really cheap) and I was spooked, I took the chance. Had it installed by a local shop and it worked like a champ, shifted just like the original. At it's first service at 37k, I had the shop put in a Next Gen valve body kit, which after some initial hiccups and rough shifts, smoothed out though with somewhat firmer shifting.   All that said, I have a very serious concern about my newer transmission as just two weeks ago it suddenly began to exhibit a strong reluctance to engage forward or reverse. It was a bit past due anyway so I took it in for service. The reason it was sticking was due to 'glitter' in the fluid clogging the filter...not good folks, often indicates a converter giving out. We ended up going ahead with the new filter and fluid, first to see if it would move and shift, and then if so buy me a little time. It did, and I've driven it over a thousand miles and it is shifting smooth, no noises or slipping. Regardless, it looks like a third gearbox is in my future so I can resume taking long trips with some confidence. In the very short term, my curiosity will have me examining the fluid to check how much glitter has reappeared.   An earlier poster had alleged, in the context of 10L100 failures, that it is another example of how we seasoned citizens somehow descend into hysteria, lose control of our senses, and react irrationally after brief encounters with the idiocy of the internet infosphere. Let me say (and I have used and abused said internet since it's infancy) there is no segment of the populace that has a corner on over-reaction to digital garbage. Just as my offering of experience in this arena is purely anecdotal and should not be considered gospel or all-encompassing, I believe it is still worthwhile information to consider, along with other relevant anecdotal experiences about things like complex transmissions, especially when balanced with other sources.   So to answer the original question, yes I got high miles out of my first 10L, trouble free for 321,000. Now I really wonder how much longer it would have went. Did I 'overreact' to the internet ghouls by replacing a 'good' one with a 'bad' one? Maybe. Who knows, the thing might have taken a puke a 100 miles later. So I'll just fix it again, then move on and start thinking about all the other stuff that will eventually wear out. It still has the original brakes (they're at ~60%), original injectors/pump, turbo, water pump, etc....pretty much original everything. Knock on wood.
    • At peak temperature.  They get to cool down and warm up more, especially those with the external cooler.  I have three GMT900s and one of them has over 225K on its original transmission.  Fluid gets changed about every 36K miles, all of it.     It's not the bean counters, it was the government.  They had to meet CAFE standards and other government requirements.   To get around that, we tune them and modify them to our liking.
    • Our customers' safety isn't something we take lightly. To ensure you get the proper assistance for your truck's repairs, please fill out the form at https://s.chevy.com/support-request with all pertinent details including your username.
    • We appreciate you sharing your experience with your truck. To ensure we get you the proper assistance, please fill out the form at https://s.chevy.com/support-request with all pertinent details including your username.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...