Jump to content

Can you add bed view camera??

icemanRC
 Share

Recommended Posts

Mark A. New Member

Mark A.

Posted
Posted
On 9/17/2020 at 7:10 PM, icemanRC said:

I have a 2020 GMC Sierra SLT. One of the factory options is adding the bed view camera for $250. Since mine did not come with this, I wondered if it would be possible to add it? Being that it’s only a $250 factory option, I figured it can’t that difficult to do. Has anyone done this or have any knowledge of this?

Iceman, if you happen to find an answer to adding the bed view camera, please let us know, I too am wanting to attempt to get this installed.

Tjeli Enthusiast

Tjeli

Posted
Posted

I want an answer to this as well.  I would like to add it to my AT4 to aid in 5th wheel hookup.  Not interested in the mirror.  Just the bed view camera.

 

-Eli

Greyhound6.2 Enthusiast

Greyhound6.2

Posted
Posted (edited)
On 9/20/2020 at 10:34 AM, icemanRC said:

That’s not true, at all. I was looking at two identical trucks. One had the extra bed view camera, one didn’t. The difference in price was $250

I priced up a Sierra SLT on the GMC build and price site and to add the bed camera I had to first have the Driver alert package, convenience package, premium packages to add that $250 camera. 

Edited by Greyhound6.2
icemanRC Enthusiast

icemanRC

Posted
  • Author
Posted
2 hours ago, Greyhound6.2 said:

I priced up a Sierra SLT on the GMC build and price site and to add the bed camera I had to first have the Driver alert package, convenience package, premium packages to add that $250 camera. 

Yes, but all of that is included in the Premium Plus package, which I have.

2016 Sierra Owner Senior Enthusiast

2016 Sierra Owner

Posted
Posted
On 9/20/2020 at 7:06 AM, icemanRC said:

I would have thought it would be a simple plug and play. I haven’t removed the lamp assembly and looked, but I figured that there’s already a wiring harness there. I couldn’t see it being anything difficult since it’s only a $250 factory option. Cheap options usually mean fast and easy. If it was $1,000 option, I’d believe there was much more to it than just a simple harness plug in. 
I guess I will call GMC and see what info I can find out. 

Did you ever call or find out anything from the dealer?

 

  • 2 years later...
BrizzlesBowTie23 Enthusiast

BrizzlesBowTie23

Posted
Posted

Sorry to bring this post back the from grave but interested to know if anyone has done this yet? I just ordered the parts to at least do the live view rear view mirror (DRZ) upgrade. Would be nice to get the bed camera working as well.

redwngr Senior Enthusiast

redwngr

Posted
Posted
1 hour ago, BrizzlesBowTie23 said:

Sorry to bring this post back the from grave but interested to know if anyone has done this yet? I just ordered the parts to at least do the live view rear view mirror (DRZ) upgrade. Would be nice to get the bed camera working as well.

Camera review mirror and the bedview camera are separate cameras. 

 

So if you want both you need the assembly with TWO cameras

 

 

 

BrizzlesBowTie23 Enthusiast

BrizzlesBowTie23

Posted
Posted (edited)
11 hours ago, redwngr said:

Camera review mirror and the bedview camera are separate cameras. 

 

So if you want both you need the assembly with TWO cameras

 

 

Yea I ordered the assembly with both cameras Im just not sure where to find the harness or cable that hooks from the bed view camera up to the VCM.

Edited by BrizzlesBowTie23
  • 1 month later...
djdapper New Member

djdapper

Posted
Posted
On 5/29/2023 at 7:37 PM, BrizzlesBowTie23 said:

Sorry to bring this post back the from grave but interested to know if anyone has done this yet? I just ordered the parts to at least do the live view rear view mirror (DRZ) upgrade. Would be nice to get the bed camera working as well.

I purchased the new light with the bed view camera only with wire harness for $175 I plan to install it this week . will update of how it works out 

MrMagloo Enthusiast

MrMagloo

Posted
Posted

Hate to highjack, but I'm watching closely as well, but I'm looking to add the front camera to a 2023.  I'm thinking whatever gets resolved here just might work for a front camera too?

  • 10 months later...
  • 3 weeks later...
Dennis5.3 New Member

Dennis5.3

Posted
Posted
On 9/18/2020 at 5:44 PM, icemanRC said:

Oh, I thought the camera was located in the third brake light. 

The “Live view” camera is located on the spoiler third brake light area.

 

kit can be purchased here:

https://www.americantrucks.com/infotainment-sierra1500-factory-oem-backup-rear-camera-lcd-mirror-g-bdlcamchmsl.html?utm_content=AT Electronics - Back Up Camera|Infotainment&T5_Var4=S512659&utm_campaign=AT+No+Vehicle+High+LTVMiddle&dialogtech=ppc&utm_source=google-pla&utm_medium=shopping&T5_Var2=shopping&T5_Var3=red&gad_source=1&gclid=CjwKCAjw1emzBhB8EiwAHwZZxTeUECigoMuvdkDRqpnHgrvKbkRaGN3v3BV--8swg3xUfCAi8OHQrhoCjegQAvD_BwE&gclsrc=aw.ds

icemanRC Enthusiast

icemanRC

Posted
  • Author
Posted (edited)
39 minutes ago, Dennis5.3 said:

The “Live view” camera is located on the spoiler third brake light area.

 

kit can be purchased here:

https://www.americantrucks.com/infotainment-sierra1500-factory-oem-backup-rear-camera-lcd-mirror-g-bdlcamchmsl.html?utm_content=AT Electronics - Back Up Camera|Infotainment&T5_Var4=S512659&utm_campaign=AT+No+Vehicle+High+LTVMiddle&dialogtech=ppc&utm_source=google-pla&utm_medium=shopping&T5_Var2=shopping&T5_Var3=red&gad_source=1&gclid=CjwKCAjw1emzBhB8EiwAHwZZxTeUECigoMuvdkDRqpnHgrvKbkRaGN3v3BV--8swg3xUfCAi8OHQrhoCjegQAvD_BwE&gclsrc=aw.ds


thanks but I sold it about a year ago. Only 23,000 miles and had lifter and transmission issues. GM admitted the lifters were bad but said they wouldn’t replace engine until the engine failed. I guess they thought that was quality customer service and thought I would enjoy to continue to stare at a check engine light. This was my first and last GM vehicle. 

Edited by icemanRC
  • 8 months later...
Chay Dommeti Enthusiast

Chay Dommeti

Posted
Posted
On 5/29/2023 at 7:37 PM, BrizzlesBowTie23 said:

Sorry to bring this post back the from grave but interested to know if anyone has done this yet? I just ordered the parts to at least do the live view rear view mirror (DRZ) upgrade. Would be nice to get the bed camera working as well.

On 5/30/2023 at 8:37 AM, BrizzlesBowTie23 said:

 

Yea I ordered the assembly with both cameras Im just not sure where to find the harness or cable that hooks from the bed view camera up to the VCM.


@BrizzlesBowTie23 Were you able to figure out and install the rear view camera ?

 

On 7/12/2023 at 5:39 PM, djdapper said:

I purchased the new light with the bed view camera only with wire harness for $175 I plan to install it this week . will update of how it works out 

 

@djdapper Any luck installing just the bed view camera ?

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • SoCal Angler
      Parking Brake - Automatic Engagement Questions

      By SoCal Angler · Posted

      2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...