Jump to content

Quad Exhaust Tips

BluegrassMotorsport
 Share

Recommended Posts

Will Jenkins Enthusiast

Will Jenkins

Posted
Posted

Does anyone think that a 4" outlet would fit? Seems like there is still a little bit of room but I am not sure. 

  • Like 1
  • 1 year later...
  • 6 months later...
s10dragracer888 Enthusiast

s10dragracer888

Posted
Posted (edited)
On 10/2/2020 at 11:32 AM, rwickens said:

https://www.amazon.com/gp/product/B071KN4LRF/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

 

Had a local Muffler Shop install them.

TRUCK.jpg

I found some black ones, too. They have dual 3” and 3.5” tips. I’ll be getting the black 3.5’s when I order my muffler. I’ll be having a paint shop cut the factory holes out of the bumper and repainting it black.

 

Edit: I cut and painted my own bumper, and the exhaust will be on in 2 weeks. I’ll update with a photo.

Edited by s10dragracer888
  • 2 weeks later...
s10dragracer888 Enthusiast

s10dragracer888

Posted
Posted (edited)
On 2/3/2022 at 2:03 PM, Will Jenkins said:

Does anyone think that a 4" outlet would fit? Seems like there is still a little bit of room but I am not sure. 

Hey I’m not sure. The opening is 9” wide at its drop off point at the bottom. Make sure that width will accommodate the ones you’re looking at; I’m sure you’ll find what you’re looking for. It’s about 6” wide at the top, trapezoid shaped on the face bar to 9” at the bottom ridge, then straight down. From there, cut at a 45° on the inside, bottom of the bumper if you’re looking up at it from the ground. If you need a couple drawings, I can lay it out, just PM me. I studied these bumpers and tips for the last week.

 

I just cut my bumper using factory measurements and the factory dual exhaust tips fit pretty closely in there. I have a tiiiiiny bit of wiggle room. Maybe 1/16” either way.

Edited by s10dragracer888
  • 2 weeks later...
s10dragracer888 Enthusiast

s10dragracer888

Posted
Posted

I got mine welded up today. Due to photo size restrictions, this will have to do until I get a better photo in sunlight.

IMG_5641.jpeg

s10dragracer888 Enthusiast

s10dragracer888

Posted
Posted
On 10/5/2023 at 3:44 PM, sharkeysierra said:

Good shot?

 

From what I can make out, yep those are quad tips. 

I felt the sarcasm in my soul. The bumper hides them really well in photos. Not a speck of chrome outside of the taillight and headlight housings….

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,717
    Total Members
    8,960
    Most Online
    Tiffanyrose
    Newest Member
    Tiffanyrose
    Joined

  • Who's Online   4 Members, 0 Anonymous, 964 Guests (See full list)

  • Latest Articles

  • Posts

    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      It seems fine because it pulls everything out of a hot engine. I’m not going to worry about a thimble full with 5K oil changes with synthetic oil. Every other oil change is at Honda they pull the plug. I watch them through the process. It turns out going to Honda what amounts to their normal oil change intervals.
    • Newduramaxh*ar
      DTC P2C48 auxiliary cooling pump

      By Newduramaxh*ar · Posted

      I tried tapping it.  This might sound like a dumb question, you should feel vibration or some type of noise when it turns on? Can someone please verify? Thank you all!
    • Chuck FB
      first oil change - 2026 2500HD gas

      By Chuck FB · Posted

      I feel better now for my own view point and actions or lack there of towards the dealership service theme reading your post and others. GM corporate is who offers the two free oil changes on the HD trucks and I bought my truck in Feb of 2025 and those oil change offers run out within 2 years I believe and I highly doubt I will be using either one of them. I had asked if I could officially give those free services to another customer ( a friend ) and they said no, its all a GM corporate thing based on the vehicle in question. What that service advisor did however was go into a little story about how such and such customer was denied engine warranty because he had done his own oil changes because then they are not documented ... you see where that goes and so an employee playing the game of scaring the customer into having the service work done there most certainly triggered my thought process. At a later date I did talk to the person who handles warranty claims at the dealership and she said to be sure to document the oil changes and keep receipts for the oil and filter ( coped the receipts from cases of Mobil oil and case of filters I bought from them ) and the vehicles VIN, the date of service, mileage etc and staple that together as a record I would give them if that was ever needed and I keep my own log book for services for each vehicle as well. Oh and about 8 months after I bought the truck the dealer starts calling me to offer a maintenance service since they haven't seen my vehicle show up on their system ... for the mere fee of 300.00 Canadian to change the oil and rotate the tires and a few other minor checks and I declined the offer, I get the call again a couple of months later for the same thing and she could tell I was not interested and she asked if they should take my name off the call list and I said yes, do that !.    By the way did you happen to keep your factory oil filter to open it up and see the surprises inside as I expect some will show up as per the odd little sliver of metal shaving and particles that the filter does trap along with bits of grey silicone sealer that come off of the inside edge of mating surfaces. I have cut open every filter so far on my truck although few miles but have changed the oil often and the second filter was vastly better with very little of anything, that first filter was the unsettling one as I expected it would be. 
    • OnTheReel
      OCI, not when but why?

      By OnTheReel · Posted

      I get why they do this…but man…not ideal. I only extract on inboard boat engines because the drains are buried and even then I hate it because it’s easy to leave a quart behind with that method.   They should market it as an “oil refresh” not oil change!
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      I only get oil changed where I can watch. Valvoline pulls through the dipstick into a see thru glass. When done they show me the dipstick. About the only way they can mess up is using the wrong oil. But that secret wouldn’t stay secret long. Honda uses TQ wrenches on everything. You can watch through a plate glass window. Discount tires does that with tires. Trust but verify. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...