Jump to content

Parts Needed for Center Console Swap??

Imcrazy

By Imcrazy
in Modifications, Wheels & Tires

 Share

Recommended Posts

Tewest86 Enthusiast

Tewest86

Posted
Posted

Just curious.  I found a console in the city I'm in but it's tan and I need black.  How much trouble is it to replace the outside pieces with the correct color parts?  If I can get a great deal on the console then it may be worth it.

flat350 Enthusiast

flat350

Posted
Posted (edited)

Found my console in a yard in Nevada after searching for 4 months for $461 shipped to Chicago,sold the jump seat on Ebay for $800.I found that it was better to call and not email the yard,much better response and the same console can be listed at different yards.

The seats don't have to be removed,loosen the front bolts and remove the rear ones to be able to raise the rear a little to access the bolts

The wiring under the pass. seat of an LT model plugs right into the console.The USB port swap requires you to remove almost everything around and including the infotainment center but its not that difficult.Swap the USB ports and connect the ext. harness to the console under the tray and the new port.

Not accounting for my time it cost me nothing to do the swap

 

Part Number Part Name Price Quantity Total
13529873 USB Port $73.02 1

 

 

84376073      Wire $29.89 1

 

84127263      Lower Panel $19.66 1  

 

 

ImageAndParts-6.pdf ImageAndParts-4 (1).pdf ImageAndParts-3 (1).pdf

Edited by flat350
  • Like 2
Tewest86 Enthusiast

Tewest86

Posted
Posted
On 12/9/2020 at 8:50 AM, flat350 said:

Found my console in a yard in Nevada after searching for 4 months for $461 shipped to Chicago,sold the jump seat on Ebay for $800.I found that it was better to call and not email the yard,much better response and the same console can be listed at different yards.

The seats don't have to be removed,loosen the front bolts and remove the rear ones to be able to raise the rear a little to access the bolts

The wiring under the pass. seat of an LT model plugs right into the console.The USB port swap requires you to remove almost everything around and including the infotainment center but its not that difficult.Swap the USB ports and connect the ext. harness to the console under the tray and the new port.

Not accounting for my time it cost me nothing to do the swap

 

Part Number Part Name Price Quantity Total
13529873 USB Port $73.02 1

 

 

84376073      Wire $29.89 1

 

84127263      Lower Panel $19.66 1  

 

 

ImageAndParts-6.pdf 446.07 kB · 3 downloads ImageAndParts-4 (1).pdf 305.61 kB · 2 downloads ImageAndParts-3 (1).pdf 250 kB · 4 downloads

Did you swap the ports to get it to work?  Also, I found another console with wireless charging, how hard to get the wireless charging hooked up?

flat350 Enthusiast

flat350

Posted
Posted (edited)
10 hours ago, Tewest86 said:

Did you swap the ports to get it to work?  Also, I found another console with wireless charging, how hard to get the wireless charging hooked up?

The harness under the seat works the ports on the back of the console,the ports in the storage area of the console are wired to the dash with the extension harness.The new/replacement USB ports in the dash are different on the back with a provision for the ext. harness to plug in and feed the console,the original doesn't have it.There was another member on here that I talked to on the phone about the swap and he said the wireless charging on his worked mine doesn't have the option so  I don't know.

He's where I got the part number for the replacement USB ports.

Edited by flat350
Tewest86 Enthusiast

Tewest86

Posted
Posted
1 hour ago, flat350 said:

The harness under the seat works the ports on the back of the console,the ports in the storage area of the console are wired to the dash with the extension harness.The new/replacement USB ports in the dash are different on the back with a provision for the ext. harness to plug in and feed the console,the original doesn't have it.There was another member on here that I talked to on the phone about the swap and he said the wireless charging on his worked mine doesn't have the option so  I don't know.

He's where I got the part number for the replacement USB ports.

Ok.  Did you install the ext harness?  Is it a pain to change out the USB ports and add the extension harness? 

flat350 Enthusiast

flat350

Posted
Posted (edited)

Not a pain just takes time,I took the infotainment center out to do it,dozen clips on the trim .and a few bolts.The USB ports just snaps in and out with a couple of clips.The extension harness just routes from under the dash at the USB and under the top of the console to the ports on it inside the cover.It might have taken me 2 hours to swap out everything inc. the entire console.

There are videos out there on removing the infotainment center,I think one of them might have been on Autostop's website.

Edited by flat350
  • 1 year later...
Jay21 New Member

Jay21

Posted
Posted

Can anyone share the parts number for the trim piece that goes in between the radi and console I keep trying to find it and the one that showed on on gm page looks like the one my truck already has. But I need the one that has two cuts on the side so the console fits perfectly. Any help thank you guys 

  • 2 weeks later...
ChrisMK Enthusiast

ChrisMK

Posted
Posted

I have the following parts available for sale.  If anyone is interested in them PM me.

 

84505589 - Upper trim panel (black)

84505560 - Mat for panel about

84848130 - Front Floor Console Wiring Harness

  • 2 years later...
Liftedrado2021 New Member

Liftedrado2021

Posted
Posted
On 10/29/2020 at 8:28 AM, Imcrazy said:

 

Good Morning, go to a parts yard/salvage yard.  I just got one from a salvaged GMC Sierra AT4 it is the right color and fit and you can get a harness from GM for the connection 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Vehicle Payments

      By Grumpy Bear · Posted

      How did all that extra get added? AI bot! 
    • KARNUT
      Vehicle Payments

      By KARNUT · Posted

      This is interesting. My quote tagged here is different from my original quote. After I’m driving them longer. That isn’t me. I don’t talk that way. I definitely wouldn’t express myself that way. Interesting.
    • UrbanRage
      What have you done to your K2 today?

      By UrbanRage · Posted

      I have the same running boards on my truck and I do agree they are bulky. I also find myself stepping over them when getting in and out of the truck. Besides providing protection to the rocker panels, they aren't very useful.  I will be replacing them soon with the Amp Powersteps. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...