Jump to content

Fast Wireless Charging AT4

txat4
 Share

Recommended Posts

txat4 Enthusiast

txat4

Posted
Posted

I just got a new Samsung Galaxy S20 and noticed that it will not fast charge using the wireless charging pad in my 2019 AT4.  My old LG V35 indicated fast wireless charging when I would charge in the car but the S20 is charging slowly.  Anyone else having this issue?

  • Like 1
Jav_eee Enthusiast

Jav_eee

Posted
Posted

2 different brands means 2 different gimmicks.

It could be the LG required less watts to “fast charge” and the S20 needs more. Or maybe the S20 has some sort of battery optimization setting that needs to be tweaked?

I’m not familiar with android phones but this is definitely a phone issue, not an issue with the truck as that power supply stays constant.


Sent from my iPhone using Tapatalk Pro

It's Tim Senior Enthusiast

It's Tim

Posted
Posted
16 minutes ago, Jav_eee said:

not an issue with the truck as that power supply stays constant.

It does, constant exposure to low level EMF none for me, thanks.

txat4 Enthusiast

txat4

Posted
  • Author
Posted
On 11/3/2020 at 7:09 AM, Jav_eee said:

2 different brands means 2 different gimmicks.

It could be the LG required less watts to “fast charge” and the S20 needs more. Or maybe the S20 has some sort of battery optimization setting that needs to be tweaked?

I’m not familiar with android phones but this is definitely a phone issue, not an issue with the truck as that power supply stays constant.


Sent from my iPhone using Tapatalk Pro

Hopefully GM comes out with a GEN III charger seeing technology will only evolve with faster charging phones.  I think due to my wireless charging specs on the S20 being 15w that's why it will not fast charge.  My LG is only rated at 10w.  Several Anker chargers I have also don't fast charge but one does.  The specs on that one shows 15w max and the others are only at 7.5w.  

Daryl Casey Enthusiast

Daryl Casey

Posted
Posted

On the S20, 

from the home screen swipe up

in the search window, type wireless charging

ensure the slide button for wireless charging is activated.

 

I have the S20 and mine charges on the pad.

 

Hope this helps,

DC

  • 1 year later...
AngryBeaver Enthusiast

AngryBeaver

Posted
Posted
On 11/12/2020 at 2:05 PM, Daryl Casey said:

On the S20, 

from the home screen swipe up

in the search window, type wireless charging

ensure the slide button for wireless charging is activated.

 

I have the S20 and mine charges on the pad.

 

Hope this helps,

DC

Anyone ever figure this out? Mine also charges extremely slow. Way too slow to be useful, and it's not just on Android phones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      That should answer the maximum depth difference between the stock and the PPE so its not hugely lower. As to the PML pan, they don't make any claims that it fits the L8T with the same transmission and in fact leave their information confusing, however on the surface it says "for Duramax" and so its hard to say. I know a while back and not sure which brand it was that specifically stated that the extra capacity pan that particular company made did NOT fit the gas version. 
    • fondupot
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By fondupot · Posted

      There are several versions of the 5100's. Some for stock height, some for leveled, some for lifted.    Side note. I finally had a chance to tow with my 30' gooseneck with about 10,000 lbs of material on it this past week. Hands down the 5100's made the trailer towing much more stable and comfortable. I even had 10 cmu blocks in the bed. What a difference over the stock shocks. 
    • Tyler Gibbs
      Correct way to service 2024 l8t allison trans?

      By Tyler Gibbs · Posted

      According to PML, the stock pan is 4.3" deep - (PML info): Dimensions: at deepest area, PML pan is 7 inches, stock pan is 4.3 inches    PPE is 5.4" so roughly 1.1" deeper than stock
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I had not realized that PPE has come out with a version of a cast aluminum oil pan specific to being able to fit onto the 10L1000 with the L8T engine sometime this spring. I was doubting that anyone would come out with something beyond what Dorman had in more of a direct factory pan swap. I see from one comment that is on the PPE site that they found the pan to be tighter to install then the factory unit and having to flex the exhaust down to fit it. I didn't lookup any specs if they have any as per how much lower it hangs but as it holds more oil and has fins outside the pan it would no doubt hang a certain amount lower.    I looked back at the site and they do have some depth measurements to get a rough comparison to the factory pan total height or hang down if you will at the front and rear of the pan so that will give a good idea how much further down this pan would end up being for ground clearance issues.    2024-2026 GM 6.6L Gas 10L1000 Heavy-Duty Cast Transmission Pan – Pacific Performance Engineering    
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      I'm in constant amazement over the number of people that do oil maintenance by how they feel, what they were told, what materials cost, what brand A claims vs brand B.     Come to think of it, this behavior isn't exclusive to oil. 🤔 They drive this way too. 😬   There is a 20 plus page thread on BITOG on Mobil 1 Advanced Clean vs Valvoline Restore and Protect it would be amusing if it were not so........humanly pitiful.   Last Sunday we were are sitting at services and listening to a speaker talk about Jesus parable of the wide and narrow gates and he said something that hadn't dawned on me but totally fit the way people in general are about just about everything. He said there are so few people on the narrow path leading to a good reward not because the the narrow gate was hidden or hard to find but because the wide gate leading to a bad end it so darn easy and uncomplicated to follow!!!             

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...