Jump to content

Recommended Posts

Posted (edited)

Has anyone in the Salt belt or Canada starting using a winter formula yet? If so what’s your take on using a winter formula with the best results on these BabyD’s?

Edited by Crazypontiac03
Posted
3 hours ago, Grover67 said:

I was thinking going with this one; https://dmaxstore.com/products/?route=product/product&path=2290_2493_3488_3491&product_id=415

however I like this amsoil for the pure fact of convenience one 8oz bottle covers 20 gallons. 

Posted

AMSOIL Diesel All-In-One works great.  It doesn't get cold enough down here in NC but my cousin uses it in his diesel tractor on the farm in PA.  He use to have issues with fuel jelling and when he started using this all that went away. 

  • Like 1
Posted

Buddy of mine works at GM testing and recommended it. Did some other research and seems it should be good year round additive.

 

-Grover67

  • Like 2
Posted
6 minutes ago, Grover67 said:

Buddy of mine works at GM testing and recommended it. Did some other research and seems it should be good year round additive.

 

-Grover67

I’ll have to give this a shot. I’m in northern IL so January/February are usually the coldest and most miserable two months of the year around here. Truck is garaged at night but sits outside work 12-14hours a day. 

Posted

Need advice.  Went to add some anti gel to my 2020 3.0L Duramax today.  Was going to give it a 10 oz shot of additive.  (Power Services Diesel Full Additive with Cetane)  Inserted the funnel about 4 inches.  When I poured the additive in the fuel filler it would not take the additive, ran out, and made a mess.  Question - is there something restricting just inside the filler ?????  Possibly I need a longer funnel ????

 

Thanks - J Tab

Posted
27 minutes ago, Jaketab said:

Need advice.  Went to add some anti gel to my 2020 3.0L Duramax today.  Was going to give it a 10 oz shot of additive.  (Power Services Diesel Full Additive with Cetane)  Inserted the funnel about 4 inches.  When I poured the additive in the fuel filler it would not take the additive, ran out, and made a mess.  Question - is there something restricting just inside the filler ?????  Possibly I need a longer funnel ????

 

Thanks - J Tab

Lol did the same thing today! Used the wrong funnel, didn't grab the long one like the one supplied for the DEF fill that was supplied from GM.

 

Lesson learned.......

 

-Grover67

Posted
1 hour ago, Grover67 said:

Lol did the same thing today! Used the wrong funnel, didn't grab the long one like the one supplied for the DEF fill that was supplied from GM.

 

Lesson learned.......

 

-Grover67

The one supplied is for fuel -- -according to the 3.0L diesel supplement.

(page 22)

Filling the Tank with a Portable Gas Can
If the vehicle runs out of fuel and must be filled from a portable gas can:
1. Locate the capless funnel adapter.
2. Insert and latch the funnel into the capless fuel system.
3. Remove and clean the funnel adapter and return it to the storage location.

 

There are 2 flappers in the fuel neck.  Pump nozzle is long enough to open both. 

 

 

Not sure why the call it 'gas' in the diesel supplement -- other than it was a copy/paste from the text in the regular owners manual? 

In any case the supplied adapter/funnel is for fuel, not def.

 

  • Like 1
Posted
14 hours ago, Grover67 said:

Lol did the same thing today! Used the wrong funnel, didn't grab the long one like the one supplied for the DEF fill that was supplied from GM.

 

Lesson learned.......

 

-Grover67

Yes, I used the funnel supplied with the vehicle.  The spout extends into the filler about 4 inches.  Possible it was not long enough or I did not have it inserted far enough to by-pass the flapper.

Thanks - J Tab

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 
    • when it's greyed out that is it's way of telling you that it's downloading the patch in the background. Eventually it will be fully downloaded and then it will prompt you at ignition shut down to run the update. I highly recommend doing the update once you get home and can run it a few times. I've had several issues with updates not going the first time around and I had to retry the update multiple times in my driveway before it was successful.   Some updates are huge and take awhile to download. You can help it by connecting to your home WiFi and keep the truck on service mode for the ignition and keep it alive for awhile on a battery charger too. There are specs it needs to be in for updating such as a full enough battery charge, no running ignition, etc.
    • I am not techy at all but wondered if you have the truck running but sitting still in park as some functions gray out as soon as the truck is moving. I believe in the settings for updates you can choose for it NOT to update and I wonder by chance if maybe that was chosen before and now it won't allow you to chose to press update, I think that is back in the settings menu where it has all the items one wants on or off etc. Also I assume you have a wifi connection and checked that it has some signal strength, not that it would have anything to do with the grayed out updates choice in that case. What I am thinking out loud of here may be be of no value but thought I would suggest it, sometimes it can be the simplest thing that resolves an issue.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...