Jump to content

HUD Add on

Thompyt88
 Share

Recommended Posts

Thompyt88 Enthusiast

Thompyt88

Posted
Posted (edited)

Has anyone tried to add the HUD to your 1500?  Doing some research and found the 2015, but I'm not sure if the dash pad has changed, the HUD is a different PN.  I am going by the 2020 PN.  I cannot verify the part numbers for the 2021 since the fiche like lead you to the accessories catalogue.  I started with - 2015 Silverado with HUD retrofit/upgrade. - 2014 - 2019 Silverado & Sierra - GM-Trucks.com (gm-trucks.com)

 

I am Looking at the following PNs:

Mount Bracket: 23407367                                           $65
Driver Information Display Switch: 84456360          $31
Instrument Cluster: 84804721                                    $412
Instrument Panel: 84553050                                       $280   Has dash panel, HUD trim bezel, and mounting strip
Cluster Visor: 84054788                                               $70 Designed for HUD
Head-up Display: 84395830                                         $510
Reinforced Beam Deflector: 23387335                      $10
Outlet Duct: 23391609                                                  $24  - I think this allows you to keep the Drivers side left defroster
Windshield: 84398043                                                 $394
 
Maybe:
Reinforced Beam: 23387334                                       $339 -  Possible has bracket tabs for HUD - Alleviating the need to remove Driver side defrost vent.  - Might be able to add own brackets.
 
WAM VIN Programmed                                                $200 + &80 round shipping
Phil’s custom harness                                                  $150 -2014 - 2018 Silverado / Sierra - HUD Retrofit Harness - Harness Dr. - DIY Done Right  
 
* Phil is designing  a 2021 HUD Harness
 
I have probably missed some things - Like where to mount HUD controls and what bracket is needed.
These above PNs are gleaned off of a 2020 GMC Denali 1500, not a 2021.  Can anyone verify that the PNs remain the same for 2021?
 
Thanks I appreciate the help and meeting you all.  
Wayne
 
 
Updated:  18 April 2021

 

Edited by Thompyt88
Added information
  • Like 1
Vigilante375 Enthusiast

Vigilante375

Posted
Posted (edited)

FYI.  If you were polarized sunglasses, you won't be able to see the HUD.  My ZL1 has a HUD and I barely use it, never use it on the street because I wear polarized glasses and never use it at night..  I've used it at the road course a couple of times but never really paid attention to it.

 

Calling the dealer or going by and giving them the parts numbers and ask them if they are the same as a 2021 would be the best thing to do.

Edited by Vigilante375
Thompyt88 Enthusiast

Thompyt88

Posted
  • Author
Posted

Good points on dealer.  Giving my VIN wouldn't help.  Giving PNs to parts guy would.  I am used to HUD.  Had it on a C6 and a C7.  

 

Thanks all

Thompyt88 Enthusiast

Thompyt88

Posted
  • Author
Posted

Depends on how clear you want the HUD to be.  I had no issues with my C6 and non-HUD windshield.  But I did eventually replace it.  I was of the understanding that a tint would achieve the same results.    I hear you though.

  • 1 month later...
Thompyt88 Enthusiast

Thompyt88

Posted
  • Author
Posted

I used the following PNs:

Mount Bracket: 23407367                                           $65
Driver Information Display Switch: 84456360           $31
Instrument Cluster: 84804721                                    $412
Instrument Panel: 84553050                                      $280   Has dash panel, HUD trim bezel, and mounting strip
Cluster Visor: 84054788                                             $70 Designed for HUD
Head-up Display: 84395830                                      $510
Outlet Duct: 23391609                                                $24  - Allows you to keep the Drivers side left defroster
Windshield: 84398043                                                $394   (Not used at this time)
 
WAM VIN Programmed                                                $200 + &80 round shipping
Phil’s custom harness                                                  $150 -2014 - 2018 Silverado / Sierra - HUD Retrofit Harness - Harness Dr. - DIY Done Right 
 
All worked well.  Phil's harness works like a charm. There is only 1 screw point to the frame for the HUD bracket.   I used some Ebay parts so the prices was lower.  Best bet is to get dash from GM since parts yards want 150 to ship.  It has a bit less in the display options as compared to a C7 Corvette.
  • 2 months later...
Chad Sommer New Member

Chad Sommer

Posted
Posted
On 6/15/2021 at 1:14 PM, Thompyt88 said:

I used the following PNs:

Mount Bracket: 23407367                                           $65
Driver Information Display Switch: 84456360           $31
Instrument Cluster: 84804721                                    $412
Instrument Panel: 84553050                                      $280   Has dash panel, HUD trim bezel, and mounting strip
Cluster Visor: 84054788                                             $70 Designed for HUD
Head-up Display: 84395830                                      $510
Outlet Duct: 23391609                                                $24  - Allows you to keep the Drivers side left defroster
Windshield: 84398043                                                $394   (Not used at this time)
 
WAM VIN Programmed                                                $200 + &80 round shipping
Phil’s custom harness                                                  $150 -2014 - 2018 Silverado / Sierra - HUD Retrofit Harness - Harness Dr. - DIY Done Right 
 
All worked well.  Phil's harness works like a charm. There is only 1 screw point to the frame for the HUD bracket.   I used some Ebay parts so the prices was lower.  Best bet is to get dash from GM since parts yards want 150 to ship.  It has a bit less in the display options as compared to a C7 Corvette.

I have successfully  installed the WAMS cluster, harness, and upgraded the steering wheel to get audio controls functional.  I have ordered the Head-Up Display from Nordstromauto and HUD harness from HarnessDr.

 

Wanting to confirm something before I pull the trigger on ordering remaining list.  Following a couple of the parts list, they all reference the w/o HUD cluster visor.   I 'm grateful for the shared info and advise. 

 

Is the cluster visor the correct part number for the HUD? 

Soft touch, without head-up display, black. With leather, without head-up display black.

Should I get?:

 

Soft touch, with head-up display, black. With leather, with head-up display black.

 

Thank you,

Chad

SVG Enthusiast

SVG

Posted
Posted

Polarized glasses will dim the HUD to your eyes but it's still visible.

  • 7 months later...
  • 2 years later...
  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,826
    Total Members
    8,960
    Most Online
    Tonwantonga
    Newest Member
    Tonwantonga
    Joined

  • Who's Online   5 Members, 0 Anonymous, 398 Guests (See full list)

  • Latest Articles

  • Posts

    • Atlas
      Gas Prices

      By Atlas · Posted

      What I think you're saying is there is supply here at home, and in Venezuela, and we could ease pricing if only it were favorable to do so.   Well, yes?   But that's not the current market. Supply isn't what could someday exist, if only, it's what producers are willing to produce and sell at a certain price point.   The national price of single family homes would come way down if we'd just slap together a few million homes this summer.   RAM and GPUs would get a lot cheaper if we just set up some factories to produce a bunch more and stopped using it to build out AI data centers.    
    • newdude
      wipers come on randomly

      By newdude · Posted

      The turn signal/multifunction switch is faulty.  I've seen a few of these go bad at work.  
    • bluemonstercali
      wipers come on randomly

      By bluemonstercali · Posted

      I am experiecing the same issue, I have gone in the setting and disabled rain sensing function but I am still experiencing this. Whe i use my turn signal they will redomly turn on. Sometime they stay on and others times we swipe 2 or 3 times and stop. Its super anoying, escpecially after a fresh wash. Anyone have any advice? . rain-sensing function, but I am still experiencing this issue Sometimes they stay on, and other times we swipe 2 or 3 times and stop.It's super annoying, especially after a fresh wash.When I use my turn signal, they will randomly turn on. I am experiencing the same issue. I have gone into the settings and disabled the rain sensing function, but I am still experiencing this.
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      If we actually used any significant amount of that source in the USA then I'd agree but we don't. We've had that discussion before. We drill and pump more than we use. Thing is, we sell. We export. Gas and Crude. It's more profitable so any shortage here is self inflicted and LEGAL.    I worked a gas plant that has multiple fuel sources available and I worked in the furnace and boiler plant in that facility. I'd had days we swapped fuel types four times in a twelve hour shift which isn't done on supply but on margin. Two of the fuel sources are internally generated. Tail gas and DAK, both of which are sold as well a consumed. We always had more than we needed to run the process but we chose the fuel that produced the best margin not bought at the cheapest price always. A good bit of math to that and back in the time that was done on a slide rule.     I worked the Shale Oil Semiworks of Chevron Research and CONOCO Research in Salt Lake City. That process never went into production although it was very successful. Why? Did we lack oil bearing shale? Nope. Price of crude never made the margins work. That was in the late 70's early 80's. Remember history? What was happening then was a reaction to that situation. It didn't drive it. If so then it's easy. This isn't a supply and demand thing. This is a profit and margin thing and AI rules that now.    In no refining situation that I was ever in would a bomb hitting a well anywhere in the world 'instantly' interrupt or even distress the supply. Most plants have more than a months worth of crude in the tank field and more in pumping stations. That yo-yo could play out over days, weeks and maybe months and have zero impact on plant operations. How many times has this been off and on in the last few months? These people and not stupid. These plants measure down time in hundreds of thousands of dollars per day. They are not sucking fumes or waiting on the next truckload with baited breath. Besides, as I noted, they are for the most part 'vertically integrated'. They own it from the dirt is sits in to the delivery rack and sometimes to the pump. It has a HUGE shock absorber built in. When production suffers, refining wins and when refining is winning exploration is killing. The rest of that crap in the news is a 'news cycle'. Government dipping in to reserves? Oil is stealing their milk money. There's a reason Chevron abandon Venezuela infrastructure and it had nothing to do with security of US citizens. Nationals run those plants. it has to do with MARGINS disappearing to corruption. They are in no hurry to return. Is there supply there? Oh yea. More than enough to offset what is bought in the middle east. Just isn't ???? Profitable.    We have supply. There are places in Illinois you can drive a pipe into the ground and run your homes natural gas furnace on it.    A refinery fire will gum up the supply works but not a localized war where the market is using a limited supply from. Now Europe, that's something other....
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      $4.00 a gallon here now.   Diesel nearly $5.00 again.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...