Jump to content

3.0 Duramax Delete

chollister29
 Share

Recommended Posts

Byrds8 Enthusiast

Byrds8

Posted
Posted

I still do my own oil changes. That kid may do more than Ill do in a lifetime but if they are all done shabby....my few becomes better than his 1000.

  • Thanks 1
KARNUT Senior Enthusiast

KARNUT

Posted
Posted
1 hour ago, Byrds8 said:

I still do my own oil changes. That kid may do more than Ill do in a lifetime but if they are all done shabby....my few becomes better than his 1000.

Yea they definitely want an incompetent boob doing oil changes. Making sure you don’t come back for repairs. Makes sense to me.

Byrds8 Enthusiast

Byrds8

Posted
Posted
5 hours ago, KARNUT said:

Yea they definitely want an incompetent boob doing oil changes. Making sure you don’t come back for repairs. Makes sense to me.

You say it like that doesn't happen. It does not matter in the least what profession it is in, there is incompetence. The lettering on my tailgate has now been done three times due to it. The same guy gouged part of the plastic trim trying to fix my seat cover. That same guy also couldn't put the foam back on correctly. We have all heard horror stories about mechanics who seemingly forgot to put the oil back. Don't get me wrong, I am not saying it happens 10% of the time or any great number but it does indeed happen. It doesn't really suck til its you that has to be that one.

KARNUT Senior Enthusiast

KARNUT

Posted
Posted
7 hours ago, Byrds8 said:

You say it like that doesn't happen. It does not matter in the least what profession it is in, there is incompetence. The lettering on my tailgate has now been done three times due to it. The same guy gouged part of the plastic trim trying to fix my seat cover. That same guy also couldn't put the foam back on correctly. We have all heard horror stories about mechanics who seemingly forgot to put the oil back. Don't get me wrong, I am not saying it happens 10% of the time or any great number but it does indeed happen. It doesn't really suck til its you that has to be that one.

I’m not saying there’re all perfect. I’m my 66 years I’ve seen incompetence. Not everyone suited for the job. Have you noticed the last year in a half. It happens even in the most important occupation. I use to do all my work when I bought used vehicles they were usually beaters when I was younger first married. As I bought newer vehicles with warranty I used them for service. It’s easy to determine who’s at fault. Ifs there’s a problem. If they do all the work. I watch they know it, they probably have it on the work sheet. Because I’m a frequent customer. No problem doing your own work. Been there done that. I’ve moved on. At my age I do what I want. Oil changes for the most part, not on the list.

Byrds8 Enthusiast

Byrds8

Posted
Posted
5 hours ago, KARNUT said:

I’m not saying there’re all perfect. I’m my 66 years I’ve seen incompetence. Not everyone suited for the job. Have you noticed the last year in a half. It happens even in the most important occupation. I use to do all my work when I bought used vehicles they were usually beaters when I was younger first married. As I bought newer vehicles with warranty I used them for service. It’s easy to determine who’s at fault. Ifs there’s a problem. If they do all the work. I watch they know it, they probably have it on the work sheet. Because I’m a frequent customer. No problem doing your own work. Been there done that. I’ve moved on. At my age I do what I want. Oil changes for the most part, not on the list.

Yeah the last year and a half has just gotten more nuts than everything was. Im only almost 50 and have done my own since I purchased my first ride. Its cheaper for me to do it myself even though its getting harder to get under there. I do keep impeccable records though :D .

  • Like 1
redwngr Senior Enthusiast

redwngr

Posted
Posted

Yes, there are service folks at dealers that should be in another occupation.

There are also some that could be having a bad day.

 

Otoh, there are also lots of owners that should be told to 'back away from the toolbox'. 

 

One of my fears when acquiring used vehicles/machines is that it might have been in the hands of one of those owners.

Just because they are very good with the appearance care does not mean that are good with mechanical servicing.
 

 

 

 

  • Like 1
  • Thanks 1
Gangly Senior Enthusiast

Gangly

Posted
Posted
On 6/6/2022 at 9:17 AM, redwngr said:

 

Just because they are very good with the appearance care does not mean that are good with mechanical servicing.
 

Very true, and it bothers me to no end when I hear "car wash" guys try to speak as though they are mechanics, and vice versa.  

 

Just because you polish shoes, it doesn't make you a cobbler.

  • Like 1
  • Haha 1
  • 1 month later...
Elevate3.0 Enthusiast

Elevate3.0

Posted
Posted

Specifically referring to the crank/no start situation. I have a ‘21 sierra 3.0 and it was doing the crank/ start situation as well as a few other things. I took it back to the dealership for repairs and they said they had heard of it and there was a TSB on the issue. Their first repair is a shim on the reluctor wheel, if that works your good, if not they have to tear the motor down and do some other repair. They did the reluctor wheel shim on mine and it has been flawless since then, almost a year. 

Dirk13 Enthusiast

Dirk13

Posted
Posted
20 hours ago, Elevate3.0 said:

Specifically referring to the crank/no start situation. I have a ‘21 sierra 3.0 and it was doing the crank/ start situation as well as a few other things. I took it back to the dealership for repairs and they said they had heard of it and there was a TSB on the issue. Their first repair is a shim on the reluctor wheel, if that works your good, if not they have to tear the motor down and do some other repair. They did the reluctor wheel shim on mine and it has been flawless since then, almost a year. 

Don’t believe they are even doing that anymore. It’s just an ECU reflash now which gets rid of the issue. 

  • Like 1
GOcustoms New Member

GOcustoms

Posted
Posted

If anyone has a lead on the software for programming the lm2 pcm, kindly reach out to me as I'm planning a custom build for the near future and we would really like to use this 2021 lm2 and transmission in this classic truck. Sadly it's not the same as previous duramax mods.. im sure someone has found a way by now. Again im just looking for help on the software sode of this, Please reach out, and thanks in advance, George

  • 9 months later...
Ronjon Enthusiast

Ronjon

Posted
Posted
On 8/12/2022 at 6:36 PM, GOcustoms said:

If anyone has a lead on the software for programming the lm2 pcm, kindly reach out to me as I'm planning a custom build for the near future and we would really like to use this 2021 lm2 and transmission in this classic truck. Sadly it's not the same as previous duramax mods.. im sure someone has found a way by now. Again im just looking for help on the software sode of this, Please reach out, and thanks in advance, George

How'd this go?

redwngr Senior Enthusiast

redwngr

Posted
Posted
2 hours ago, Ronjon said:

How'd this go?

GOcustoms joined and made the post August 21, 2022.

Last visited site Aug 13 2022 -- the day after the original post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • DaleB
      No Software Updates - Old Build

      By DaleB · Posted

      Hi all - my current truck is a 2022.5 1500 High Country 3.0. I bought the truck used last year. After doing some digging, I noticed that my truck's software is stuck on the original build from 2022. I have no available software updates. I talked to my dealer about this and they recommended not trying to force an update since the 36,000 mile warranty is expired. This is a big bummer since there have been many major releases since that have fixed small issues and improved speed/usability.   For reference, the current software build number is: full_gminfo37_gb-user 10 W158E-W164.4.2-QIH22B-563.3 158 release-keys Has anyone had a similar experience? Should I just forget about it and move on, or try a different dealer?
    • B07
      Needing this part.

      By B07 · Posted

      Sure. Buy it for me 🤣
    • B07
      Needing this part.

      By B07 · Posted

      Using zip ties but 2-3 they snap due to sharp edges. Just using a shoestring. Last longer. 🤣
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I ordered the Snap On...waiting for it to come in later this week or early next week.   New front cover, new crank seal and new balancer are on. Water pump, pulley, fan, hoses, and plastics reinstalled. I can move forward knowing all my timing marks are dead on and the front engine is hopefully sealed better than it was. Take 2 with the water pump...trying high temp thread sealer on the lower bolts.   Rebuilt injector and new-new regulator is in, it looks like new. Top intake reassembled and all the bits are reconnected and snugged down.   Thinking about knock sensors again, I located both of mine and, there's your problem, Francis... The driver's side one is broke, plastic is bashed in, part of the wire is bare, and it appears to have been damaged like that for a long time. I saw the wire but didn't think anything of it. The knock sensor might not be my pulled timing issue, but it sure looks suspect. It must still be conducting, otherwise I'd expect a CEL. But perhaps with its sacred crystal inside exposed, jilted and dirty, maybe it's sending mixed signals. So I'm waiting for one of those and a new pigtail to come in. Pass side sensor looks good, except for the spark plug wire resting on it (!). The plug wires are healthy so it shouldn't be causing an issue, but I separated them and added zip ties to nearby looms to keep everything well apart.   So, I'm down to installing a knock sensor AND, oh, replacing the exhaust and cat. I actually think that's going to be fairly easy, it's all bolt-together, all new stuff from Walker is laid out on the shop floor ready to go. Hopefully have this thing on the road again for the weekend.   My luck? It will still be leaking oil, coolant, pulled timing, intermittent CEL for running rich, or it probably won't run at all -- because that's how this project has gone.   I've never worked on a vehicle so ...hurt? ...cursed? in my life. Everything has been effed with SO HARD, but I think...knock on wood...I've managed to undo all the backyard stuff and we're almost reset back to "just" an 80k mile, 30 year old Blazer.
    • PunchT37
      Would this CV Shaft be bad?

      By PunchT37 · Posted

      Yes. You need to check out that thing, and the hub further.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...