Jump to content

Recommended Posts

Posted (edited)

Hi everyone been a while since I posted been a members in the 90s but had to make a new profile anyway I’m having issues with my 2019 2.7 L turbo I have 20,000 miles on it the issue is when it’s below zero outside and you started in the mornings it goes into limp mode I’ve had it in the dealer several times they replace cam sensors cam actuators they even took the wiring harness out and inspected it apparently I’m the only one at this time that’s having this issue and they been  working closely with the GM engineers now other people are starting to have problems got a phone call from my local dealership last week saying now that GM wants my motor so they’re gonna replace my motor with a new one and GM wants my motor to do some tests on it they’re going to stick it in the big freezer hook it up to some monitors and find out what the issue is and then when they figure it out they’re gonna put a service bulletin out my question is has anybody else had this problem needless to say when talking to my salesman I am going to be ordering a 3 L diesel here so in two weeks the truck goes in for a new motor we will see what happens thanks 

Edited by Crafty 88
Spelling
Posted

No they’re going to put a brand new 2.7 L in what I meant is I’m ordering a new diesel pick up because I am not keeping this one since GM won’t buy it back

Posted (edited)

That's B S.

Tell them they can have the motor if they give you a new truck. Even trade.

Edited by dieselfan1
Posted
On 2/20/2022 at 3:57 PM, bigdoug42 said:

You can just swap the gas motor with a diesel?

 

Would be a lot more than just an engine swap. 

 

3.0 is always mated to the 10 speed,

2.7 is never mated to the the 10 speed. 

 

Would also require adding a def tank and fill system.

Emissions and exhaust are different.

Likely different radiator/cooling system. 

etc

 

 

I was wondering if the replacement 2.7L would be the newer high output one....

 

Posted
2 hours ago, dieselfan1 said:

That's B S.

Tell them they can have the motor if they give you a new truck. Even trade.

Pretty sure that's not how warranty works...

  • Like 1
Posted

GM would have hundreds of thousands of vehicles bought back if warranty worked that way lol

 

Lets see here, $1 billion dollars in used dead trucks or $100 million in warranty work for engines/transmission. Doesn't take a genius to figure out what option they are going to take.

  • 1 month later...
Posted
On 2/20/2022 at 1:05 PM, bigdoug42 said:

Oh ok, lol. I didn't care for the 2.7l when I test drove one. I got the 5.3, and it has been rock solid this far.

 

Agreed. 2.7l was boring.  Nothing replaces v8's, and if you think otherwise, stop smoking that weed and start realizing its real life

Posted

Does the 2.7T have active grill shutters?  If not, I wonder if the dealer or GM even thought about the intercooler freezing up, since the OP mentioned it happens below O degrees F. This has been a problem in the 1.5T found in the newer Equinox/Terrain lineup. The solution there was in some cases an intercooler replacement but in most cases GM just provided those in cold climes a radiator cover to be used during cold weather.

Posted
19 hours ago, garagerog said:

Does the 2.7T have active grill shutters?  If not, I wonder if the dealer or GM even thought about the intercooler freezing up, since the OP mentioned it happens below O degrees F. This has been a problem in the 1.5T found in the newer Equinox/Terrain lineup. The solution there was in some cases an intercooler replacement but in most cases GM just provided those in cold climes a radiator cover to be used during cold weather.

Yes. It has active grill shutters. 

  • 2 years later...
Posted
On 4/19/2022 at 7:45 AM, ESierra said:

Yes. It has active grill shutters. 

I'm thinking about buying the 2019 2.7 leader turbocharged to tow a 2465 Lance almost 30 ft trailer that's only 7 to 8,000 lb when full. Will that be a problem? And I didn't quite understand if you had a gasoline or diesel engine. Diesel is known to be thick in cold conditions. But it sounds like you have a gas so, luckily I live in Texas and we probably won't travel anywhere below zero.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,193 Guests (See full list)

  • Latest Articles

  • Posts

    • Yep! This should be a pin somewhere as @pgamboa really dives into all of this. Thanks for reposting the link!
    • I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
    • Atlas, you kill me As aggravating as a project like this can be you have been unable to hide your fascination with learning and using that angst against this beast like a Ninjitsu Master. It amuses you, admit it now.      BTW, love your writing style. 😉       
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...