Jump to content

Which running boards???

INGMWETRUST
 Share

Recommended Posts

INGMWETRUST Enthusiast

INGMWETRUST

Posted
  • Author
Posted

Thank you all for your help, much appreciated!

So many choices, all seem solid!

 

I went ahead and installed these 

IONIC 5" STAINLESS CURVED NERF BARS

https://realtruck.com/p/ionic-5-stainless-curved-nerf-bars/ias-402299p/

 

So far really love the construction of them. Very sturdy and not as bulky (IMO) as some of the other ones on the market.

Just ordered a Bakflip MX4 as well. (Hopefully install isn't too tedious).

Will be posting pics of both as soon asap.

  • 1 month later...
jsc406 Enthusiast

jsc406

Posted
Posted
On 6/23/2022 at 9:54 AM, bigRand said:

Will be posting pics of both as soon asap.

Have you got any pics posted? I'm looking for examples of LTZs with steps - so much chrome! Not sure I could pull off black steps. 🤔

4banger Enthusiast

4banger

Posted
Posted

the new high clearance side steps from gm are excellent if you like stealth, you don't really see them on the truck unless you're really close to it or looking for them, they are slim and tight fitting, they are also a top choice if you actually leave the pavement, and or, live where there's snow, highly unlikely to drag on these and tear one off

 

one of my lifelong gm pet peeves with stock half ton 4x4's, about as much clearance as a Honda Civic off the lot with factory chin spoilers and the low nose period plus any with most factory side steps hanging way down as well, it's like a modern el camino rather than a 4x4 truck lol, cripes even a 4" lift on new one only makes it about as tall as the heavy duty 3/4 and 1 tons

  • 2 weeks later...
MG386 Enthusiast

MG386

Posted
Posted

I put the high clearance steps on my AT4 and gained over 2" of ground clearance.  I bent the mounting brackets on the stock boards, they hang really low.

  • 2 weeks later...
tangomango Enthusiast

tangomango

Posted
Posted

[img]https://www.roughcountry.com/media/catalog/product/cache/589b0b0e3587c135a53c6bb6cef2d094/i/m/img_9598_18.jpg[/img]

 

Stock image, but I bought the Rough Country HD2's for my 2020 LT. Looks so good, but I just wish it were aluminum or something lighter

Scott Dobbs Enthusiast

Scott Dobbs

Posted
Posted (edited)

Running boards were the first thing I did to mine - the prices from the dealership were considerably higher than most aftermarket and not much difference.  I wanted the step style instead of using the tubes with pads and ordered direct from Lund and placed my order at the right time during a sale and got them shipped direct to my door for 270.00.  Extremely easy to install except for all the frame wax on my arms lol.

 

20220907_160022.jpg

Edited by Scott Dobbs
Added content
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Cold start Miss, oil in cylinder

      By asilverblazer · Posted

      Can you sample the pooled liquid, enough to confirm it is oil?   ...That its not fuel or coolant.   Also, make sure combustion gases aren't entering the cooling system.   Simply put, either oil being pushed up past the rings (this really isn't possible), oil leaking past the head gasket, oil leaking past the valve, oil entering through the intake air path. If none of this is likely - it may not be oil.   What could be likely is the fuel injector leaking down. A puddle of gas would still smoke and rough idle. (Same cylinder has the same problem after injector replacement?)   What is the crank time first thing in the morning, when the puddle would be present? Does it seem like the high pressure fuel pump needs an extra second or two to rebuild the pressure that injector 8 may have let bleed off? Check the fuel pressure via a scanner prior to starting the engine.    
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      Good information!  I didn't know about the dementia aspect and asked for a general for my second knee. I'd heard that recovery room time is usually shorter with a general.   The anesthesiologist talked me out of it and I had the spinal.  Inconvenience and/or discomfort is a small price to pay for reduced risk!
    • garagerog
      Navigating senior years.

      By garagerog · Posted

      This is for those over 70 years of age contemplating joint replacement surgery involving general anesthesia. Even some 55 yrs. ago when I took my pharmacology class the dangers of developing dementia in the elderly that had general anesthesia were beginning to be recognized. Over the years there has been some refinement in the cautionary warnings, avoid general anesthesia if possible if you've had close to 10 priors, especially over the age of 70 and/or a family history of dementia. I'm not including the twilight anesthesia induced by propofol often used in cytoscopies or colonscopies. Seriously think about seeing a neurologist and undergo cognitive testing before proceeding if any of those criteria apply to you. Spinal anesthesia may be an option in some cases. I'm in the above camp and although I could use a new right knee, I get fidgety according to a prior orthopedic surgeon when the bone saw spools up or maybe it was the smell of saw blade meeting bone, anyhow I may have one general anesthesia left in me which I will pocket for now and I'm choosing mind over mobility, anyway where did I leave my damn cane!
    • GMCustomerService
      July 2026 upgrade push issues

      By GMCustomerService · Posted

      We understand your frustrations with your auto start/stop, fuel gauge and cruise control concerns since your latest update, @LarT-26. You mentioned getting repairs completed, however, have your concerns been resolved? If not, we would like to learn more so we may explore the best path of assistance moving forward alongside your local dealership. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.
    • GMCustomerService
      Multigate electrical problem

      By GMCustomerService · Posted

      We understand your frustrations with being unable to open your Sierra’s top inner tailgate, @smitty81503. Your concerns are frustrating, and we would like the opportunity to explore the best path of assistance to pursue their resolutions. There are many different factors that could be the root cause of vehicle concerns, and we handle each one on a case-by-case basis. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...