Jump to content

Recommended Posts

Posted

2020 silverado,  my armrest/center console is cracking already. Ive attached a picture.  Has anyone had this issue?  Is it covered under a warranty? Or is there a way to re-cover/fix it?

Screenshot_20220623-022334_Gallery.jpg

Posted

They aren't going to fix it under warranty since you are past the 36000 miles bumper to  bumper. Buy a new cover on ebay for around 30 bucks and fix it yourself. 

Posted
2 minutes ago, newdude said:

That won't be under warranty at all.

 

A little less elbow on your next one and it should last longer.  

Thats my issue,  its not where the point of my elbow sits lol. My elbow is closer to the front.  I have no idea why it started cracking where it did

Posted
43 minutes ago, dieselfan1 said:

They aren't going to fix it under warranty since you are past the 36000 miles bumper to  bumper. Buy a new cover on ebay for around 30 bucks and fix it yourself. 

I've looked for just the vinyl insert, but haven't been able to find one

Posted

I have a like new center console/jump seat for sale with storage under the armrest. Black, never sat on. $250.00. Message me if interested. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,696
    Total Members
    8,960
    Most Online
    cz2653
    Newest Member
    cz2653
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,261 Guests (See full list)

  • Latest Articles

  • Posts

    • I did a search outside of this forum and came across a thread from this forum from two years ago which was amusing but one I recall now from a trusted member who had himself had to add a quart on his brand new truck to bring it up to near the level plug level. Then after accumulating 5000 or so miles on the truck he pulled the cover to drain it out and wiped out the bottom of the diff housing and put the factory cover back on and in his case it took exactly 4 quarts to bring it up to within that 4/10 of an inch below the fill/level check plug, far more than the GM spec. That is a big difference between that GM spec ( which is why the GM diffs are below the level they themselves say they should be when coming out of the factory ) vs what amounts to around 8 pints of oil.    My own truck when I first got it home from new, I had not measured how much volume mine took since I used a hand pump on a 6 gallon pail of gear oil to top it off but I had measured it by using a bent wire on the flat shop floor after the truck sat overnight and a ruler and it was exactly 1" below the bottom of the fill hole on the rear diff. That fell right into line with what others have measured from a factory filled rear diff on these HD trucks, however the GM instructions are to fill from within between 4/10" of an inch or up to the bottom of the fill/level check hole as the full range. So that is why it alarmed me when you mentioned not seeing any oil in that window although I wasn't sure if that diff cover held the exact same amount as the factory cover so can only speculate its probably very close to retain the same oil flow characteristics over the top that the ring gear provides with the factory curved cover vs some of these odd flat back diff covers ( the whole video Gale does on that about some of the goofy after market covers out there ). 
    • I agree it's ambiguous, and somewhat complicated with a shared application. For S&Gs, I just looked on Amsoil's website for a 2023 Ram 2500 with 6.4 gas. https://www.amsoil.com/lookup/auto-and-light-truck/2023/ram/2500-pickup/6-4l-8-cyl-engine-code-j-esb-j/   There's a lot of listings for Ram rear differentials, and too early in the morning to dig into the variants. But there's a big difference in fluid volume called for between them and GM applications, assuming it's the same axle assembly.    So, if GM differentials tend to be underfilled, what does everyone think about a 7 pint fill, as opposed to the 6.3 pints listed on Amsoil's website? It would somewhat conservatively split the difference between Ram and GM specs.
    • Thanks for the reply’s everyone.  I will try to find the alignment printout and post that up.  Sounds like I’ll be taking it back to have the alignment re-checked
    • ok,good to hear,  being 10 plus years old i was thinking of changing them, but ill leave them be.   thanks for the help
    • Can I ask if you are having issues with the current coils?   With all of my years around LS engines, the stock coils are the best hands down. If they aren't giving you any problems, do no change them. They can go 200-300k miles easy without a hiccup.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...