Jump to content

Differential for the snow

jim17

By jim17
in Engines & Drivetrain

 Share

Recommended Posts

jim17 New Member

jim17

Posted
Posted

I live in Canada and have a RWD Sierra with an open differential. I've gotten through the winters with snow tires and some weight in the bed, but I'm looking to improve traction and would appreciate opinions on the best differential for use in the snow. Once I get moving, the snow tires, weight and momentum work great, I have no issues staying on the road. Its when I have to get moving from a dead stop, or have to go up a steep road that traction can become an issue. From what I've read a lot of people like the Detroit Truetrac, but unfortunately Eaton doesn't list the Truetrac for my truck with the 8.5" 10 bolt differential. The best alternative I can find is the Powertrax GT201030 which is another helical gear style LSD. I'm also looking at the G80 gov lock. I take it pretty easy on the gas pedal, so I'm not overly concerned about the durability issues with the G80 - I'm focused on what would offer the most traction to get up a steep snow covered road or what would help me get moving from a stop.

 

Thanks for any help or opinions 👍

crankman Enthusiast

crankman

Posted
Posted

Is your Sierra 4wd? Im guessing no so have you considered have a set of studded tires just for winter? 

jim17 New Member

jim17

Posted
  • Author
Posted

No this truck is rear wheel drive. I do have a set of studded winter tires on seperate rims for winter use, which do help greatly.

CamGTP Senior Enthusiast

CamGTP

Posted
Posted (edited)

Another locker will do. The G80 is proven to work so there would be no problems going with that.

 

The 10 bolt rear ends should have lots of options for lockers, basically every single truck before 2014 was a 10 bolt rear end. The 2014+ went to a 12 bolt rear end, at least in the V8 trucks they did.

 

Here is the eaton for a 10 bolt rear end with the 8.5/8.6 rear end. You just need to buy the bearing install kit and it works.

 

https://www.summitracing.com/parts/dtl-913a481#overview

Edited by CamGTP
  • Like 1
Z45 Senior Enthusiast

Z45

Posted
Posted

I have had a few trucks with the GM G80 locker and NEVER had a single issue with it unlike all the doomsday posts to the contrary. 

100's of thousands of them on the road. Its an excellent product. Like anything, it can be misused and misrepresented and blamed for things that are not its fault. 

asilverblazer Senior Enthusiast

asilverblazer

Posted
Posted
19 hours ago, elcamino said:

I have had a few trucks with the GM G80 locker and NEVER had a single issue with it unlike all the doomsday posts to the contrary. 

100's of thousands of them on the road. Its an excellent product. Like anything, it can be misused and misrepresented and blamed for things that are not its fault. 

 

Ditto, I got over 200,000 trouble free miles on one, with probably another 150,000 in combination on others. 

 

Not to say I wouldn't try something else - but why fix what isn't broke?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • TrueBlue
      Transmission Temperature Hitting 220s

      By TrueBlue · Posted

      Thanks, so being a different beast altogether, anyone know what the "optimal" temp is for the 10L80/90 for proper shifting?
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      How many years have I pointed out every point in that link to the folks here and been avalanched with criticisms and outright hostilities at times? I ran counter to even the great CUSTOMBOSS and Lake Speed Jr and the half dozen experts on YouTube and in the final.....GM, Physics (Stribeck) backs that Grumpy old Bear.    Honestly, I never said a thing engineering hadn't studied silly and laid in concrete during WWII. But I'm old, the information is old and yet, the Laws of Physics are eternal.    Okay there is one exception. I vehemently disagree with their use of the word 'tolerances' when what it meant is "clearance".   The clearance is the distance between two objects. The tolerance is the degree of acceptable variation permitted in that clearance. I.E., piston to bore clearance is 0.004" with a tolerance of +/- .0002" so the clearance is in specification if it lies between 0.0038" and 0.0042". Cutting that 'tolerance in half has ZERO impact on lubrication requirements. Makes for more difficulty in manufacturing.  But a tighter clearance 'MAY'. Depends on finish. Anyway....   It's one of those statements made by people to make themselves look smarter than they are to convince people who are as un-enlighten as they seem to manipulate their behaviors. But hey, the blind leading the blind puts them both in the pit. 
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Out and about yesterday on a long Saturday drive I passed a lot of Shell stations. My preferred, so I pay attention. Lot's of small town Illinois so not six stations in three blocks like the city.    Everyone of them over a radius of say 100 miles had regular at $4.19 but one which was the one closest to home at $4.15. However Premium pricing varied greatly between 85 cents over regular to $1.50 over. I'm not counting the price of the station with the lowest regular so the reference is the same for the remainder and all within the same brand. However the spread discrepancy holds across all brands.     @txab, any thoughts on that? 
    • revrnd
      Future GMC Jimmy

      By revrnd · Posted

      What are your thoughts? The Chevy Blazer relaunch was an epic case of 'lunchbag letdown'. Jeep Wranglers and Ford Broncos stick out like a sore thumb.    The AI photos do not look like a 'retro version', but shrunken Tahoes. Get away from the 'futuristic look'. I've seen two concepts. One had rectangular headlight like a Rivian and the other way too big headlights (similar to a previous non-Wrangler SUV) should include dual round headlights like the early version.   If not this would look OK   At least it has GM styling (albeit the K2XX) A lot of the images floating around look like Bronco IIs or the current Bronco. Looking at the Broncos in my area (central Ontario, it seems to be a mix of 2 doors and 4 doors, 'mall rated' to ones that could go offroad.    I'm sure a AT4 and AT4X RPOs could be outfitted similar to a Rubicon if the braintrust understood the whole offroad scene. Crossing my fingers that if it does see the light that the front air dam/bumper doesn't extend below the center line of the tire...      
    • revrnd
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By revrnd · Posted

      I saw this news earlier this year:   https://theautowire.com/2026/06/12/gm-kills-off-chevys-biggest-silverado-trucks-as-sales-collapse-and-factory-fallout-spreads/

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...