Jump to content

Recommended Posts

Posted
On 9/29/2023 at 10:33 AM, Rototerrier said:

Your vehicle is charging the batteries while you are towing.

Yes it is, most people don't know that.  When we dry camp overnight at say a Walmart parking lot on our way to another campground, the battery is at a 100% when we stop and typically around 65% when we leave the next morning 10 hours later.  The battery on the camper is keeping our fridge and freezer cold.  It's giving us light, powering up our phones, powering the water pump when we take showers, that one battery is doing it's job big time.  After driving another 3 hours when we stop to stretch, I look at the power meter and we are back to 100% just from the truck and our 165 watt solar panel.  I love it!!!

Posted (edited)

Just had to cancel a vacation from Iowa to Maine because of this. The truck threw these errors and I suspected the solar causing it. disconnect it (2 hr into trip) in Illinois and all was fine for the another coupe of hrs. then in Indiana started again intermittently. decided better to cancel trip. after awhile it only disengaged when starting the truck.   

Edited by Kevin Peele
broken link
Posted
On 8/27/2023 at 11:00 PM, UWSkier said:

My truck goes in on Tuesday for service.  Hoping they have the bulletin published by then so I can point the service director to that.  Also need them to figure out why any trailer I plug in says the running lights don't work, and the running lights are always on.  Will update what I hear.

Ah you have the running light problem too? I took it in to Chevy and it's supposed to be a "trailer light module" they need to order a part which they cannot get because of the strike. But I am also having the trailer brake issue as well.

Posted
17 hours ago, Jettech1 said:

Yes it is, most people don't know that.  When we dry camp overnight at say a Walmart parking lot on our way to another campground, the battery is at a 100% when we stop and typically around 65% when we leave the next morning 10 hours later.  The battery on the camper is keeping our fridge and freezer cold.  It's giving us light, powering up our phones, powering the water pump when we take showers, that one battery is doing it's job big time.  After driving another 3 hours when we stop to stretch, I look at the power meter and we are back to 100% just from the truck and our 165 watt solar panel.  I love it!!!

This is true but, it does not charge with a high enough voltage (14.6-.8) volts to fully equalize a LiFePo4 battery(s) which is important for long battery life. You need a LiFePo4 enabled solar charge controller or a proper DC converter to get to the required voltage. 

Posted
1 hour ago, 2Ranchers said:

This is true but, it does not charge with a high enough voltage (14.6-.8) volts to fully equalize a LiFePo4 battery(s) which is important for long battery life. You need a LiFePo4 enabled solar charge controller or a proper DC converter to get to the required voltage. 

I just have a run of the mill lead acid battery.  When it dies I'll be switching to Lipo.  Our camper is already equipped with a selectable charge controller for the different battery types.

  • Like 1
Posted
3 hours ago, Kevin Peele said:

Ah you have the running light problem too? I took it in to Chevy and it's supposed to be a "trailer light module" they need to order a part which they cannot get because of the strike. But I am also having the trailer brake issue as well.

Yes.  Waiting on the two modules.  One is in.  Other is supposed to arrive tomorrow, but I doubt that...

Posted
2 hours ago, UWSkier said:

Yes.  Waiting on the two modules.  One is in.  Other is supposed to arrive tomorrow, but I doubt that...

Wait what? waiting on parts since end of Aug? good grief.

Posted (edited)
17 hours ago, Kevin Peele said:

Wait what? waiting on parts since end of Aug? good grief.

I have a 2024.  It was diagnosed as needing a new trailer light control module in addition to the updated brake control module at the dealership two weeks ago, which is when they ordered the modules.  Computer still saying the light module will arrive today.  It's scheduled to go in for service tomorrow.

Edited by UWSkier
Posted

 I am so glad I found this thread. I am on a sunny road trip with my 2024 3500  Duramax which is  is disconnecting it's trailer controller and chimming constantly as I tow my TT with 300 watts solar  & 1.000 miles to go!!!

I will try disconnecting solar and or  removing #84 fuse and try to keep my sanity! I will give an update to see if this cures the issue.

Interestingly the last trip was cloudy and I did not have this issue.

Posted
22 hours ago, Jon Sairs said:

 I am so glad I found this thread. I am on a sunny road trip with my 2024 3500  Duramax which is  is disconnecting it's trailer controller and chimming constantly as I tow my TT with 300 watts solar  & 1.000 miles to go!!!

I will try disconnecting solar and or  removing #84 fuse and try to keep my sanity! I will give an update to see if this cures the issue.

Interestingly the last trip was cloudy and I did not have this issue.

Turning off the solar will help but you still might see it briefly from time to time.  At least that was my experience before I bought a cheap diode and wired it in.

Posted

Brought the truck in for its first oil change (complementary) and told the dealer about the brake controller issue when towing our travel trailer. They've ordered a new updated brake controller. No commitment to when it will arrive sue to the strike.

 

Posted

New brake controller arrived today. Bringing the truck in next week for install and re-programming. 

Shocked that it took only 5 days to get here.

 

  • Like 1
Posted
On 10/2/2023 at 10:21 AM, Kevin Peele said:

Ah you have the running light problem too? I took it in to Chevy and it's supposed to be a "trailer light module" they need to order a part which they cannot get because of the strike. But I am also having the trailer brake issue as well.

both modules swapped out and both problems fixed!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,888
    Total Members
    8,960
    Most Online
    xdieselmechanic
    Newest Member
    xdieselmechanic
    Joined
  • Who's Online   1 Member, 0 Anonymous, 603 Guests (See full list)


  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...