Jump to content

Recommended Posts

Posted
4 hours ago, shudog said:

Was set on Armor Shield but a lot of reviews said it didn't last.

 

Just to let you know, I used Armor Shield and got about 4 years out of it before I reapplied and it was still beading well and looking very glossy.  Always get comments that my truck looks "brand new".  Saw the same on both vehicles.  I will say, my cars are always garaged so that would obviously help.

Posted
1 hour ago, J2Jones said:

 

Just to let you know, I used Armor Shield and got about 4 years out of it before I reapplied and it was still beading well and looking very glossy.  Always get comments that my truck looks "brand new".  Saw the same on both vehicles.  I will say, my cars are always garaged so that would obviously help.

Thanks.  I'm sure they are all top notch.  I just bought a kit from Adams polishes - prep spray, Advanced Graphene, and boost spray along with towels & applicator.  I'll be busy in the garage this weekend!  

 

I'm probably not going to do the wheels & grill with the ceramic.  I wash my vehicle regularly and clean those areas, it just seems like getting the ceramic coating on those detailed spots evenly and wiped off, would be a major hassle.  I typically just hit them with spray wax every other wash and keep them clean.  We'll see.  I'll probably be burned out on this halfway in...!!!

Posted
21 hours ago, shudog said:

Thanks.  I'm sure they are all top notch.  I just bought a kit from Adams polishes - prep spray, Advanced Graphene, and boost spray along with towels & applicator.  I'll be busy in the garage this weekend!  

 

I'm probably not going to do the wheels & grill with the ceramic.  I wash my vehicle regularly and clean those areas, it just seems like getting the ceramic coating on those detailed spots evenly and wiped off, would be a major hassle.  I typically just hit them with spray wax every other wash and keep them clean.  We'll see.  I'll probably be burned out on this halfway in...!!!

 Naw! You wont get burnt out. Not if you wash it regularly. I found it hard to get an even looking finish on chrome, so i didnt the grille or the front bumper. Always said i was gunna sometime but never have. It would be nice for the bugs in summer though if you live in a place where those are abundant!

 

Posted

Ran out at lunch to get some supplies for this project.  Bought some spray wax for the grille and wheels (too detailed to do full ceramic), some clay bar, and big soft microfiber towels.  $60.  Dang.  I really didn't need the claybar, I already have one but it's kinda dirty.  THey only sold a 3 pack for $30.  What a ripoff.  The spray wax was $16.  Towels were cheap for a 3 pack at $9.99

Posted

Adding some details here for those who may be interested in doing this themselves.

 

Last night I got started in the garage.  Gave the truck a really thorough wash last night, took close to an hour.  Paid extra attention to the wheel wells, bumpers, glass, mirrors and running boards.  

truckwash.jpg.d0057ffb29ffff6343cd32939178f070.jpg

Also ran back over everything with clay bar.  It barely picked up any grit at all, maybe a bit around the wheel wells.

claybar.jpg.b6fcf70b5efba3884a0b8aaaa69eb194.jpg

I debated whether or not a light polish was necessary.  The truck only has 2,500 miles on it.  Paint is in excellent condition as you can see.  I think I'm still going to hit it tonight.  I have a Porter Cable random orbital buffer I'll use with the Meguiars polish, has a very light polishing effect.  This is more to remove the existing coat of wax.  There are a few small light scratches I could see, walking around the truck with a work light.  This should knock those down, remove the existing wax and hopefully be ready to start the ceramic coating tomorrow.  polish.jpg.637316b674390cfe4e41a6bf063969ff.jpg

  • Like 1
Posted

also, I plugged in dehumidifier in the garage last night since it was wet from washing.  Should have the humidity down to 50% by the time I start polishing tonight, will make it easier on and off with less buffing.

 

doorshine.jpg.3986063ef8944fa2c5512593077f9a03.jpg

  • Like 1
Posted (edited)

I picked up on this project again today.  Been sitting since Thurs night.  Got all my supplies from Adams.  Worked with the porter cable random orbital buffer and Meguiars polish which is very light for very light scuffs and overall cleaning, not any sort of real cut for deep scratches or swirls but truck is new so that's cool.  Spent about 3 hrs to get it right.  Ended up going over a few areas twice and spent longer than I should've making sure everything was buffed off after, kinda hard in the garage even with bright LED's and a couple work lights.  I wouldn't have spent as much time but knowing this job should last a few years, I was willing to spend the extra time.

 

Overall very happy.  Ready to hit it with the prep spray in the morning and lay down the Ceramic.  hoping that only takes about 1.5 more hours.   Tailgate shine is insane.  

 

 

adams kit.jpg

gate shine.jpg

hood polish.jpg

side shine.jpg

Edited by shudog
  • Like 2
Posted

Finished up this morning.  Started at 9am, gave the truck a quick wipedown with the prep spray.  Took 15 mins.  Started on the hood and did it in 4 or 5 sections, taking my time, overlapping each section and applying left-right then up-down to get full coverage.  Took about 1.5 hrs to do all the truck panels.  Did not do the grille, glass or wheels with the deramic coating.  Had to go back and touch up a few areas.  Took a long time on the roof.  That is a big piece of area.  Took another 30 mins to do a spray wax on the wheels and grill, then I hit the running boards again.  

 

A few things - Id probably not do this if my truck wasn't black and if I was able to park inside and do regular hand washing.  It takes a lot.  But having this coating on shoujld allow the truck to stay cleaner much longer and I won't introduce scratches with routine washing & dry.  

 

The Adams product goes on easy and wipes off easy.  I had a few spots I missed wiping off that I caught after i pulled it outside.  Just reapply the coating with the applicator and wipe it clean.  Easy.

 

I really like that this stuff can be appleid to glass, plastic, trim etc.  It really makes the top of the bed rail, mirrors, running boards etc look good.

 

The overall slickness is very good but maybe not as good as a full carnuba wax  But obviously that only lasts a few months.

 

I applied the product pretty heavily and still have over half a bottle.  So overall I'd give the Adams product a thumbs up. 

 

Now we'll see how well it lasts.

  • Like 3
  • Thanks 1
Posted

I realize the grill and bumper are pretty detailed, but the benefit is worth it.  I had mine done professionally with Opti-Coat Pro+, and the wheels were done as well.  Bugs are easier to remove from the grill and the wheels clean easily.  Washing for me is generally ONR and an occasional M wash from Optimum.  I have the Power Wash, and will do that and a iron removal after the winter.

Posted (edited)
7 hours ago, SPASierra said:

I realize the grill and bumper are pretty detailed, but the benefit is worth it.  I had mine done professionally with Opti-Coat Pro+, and the wheels were done as well.  Bugs are easier to remove from the grill and the wheels clean easily.  Washing for me is generally ONR and an occasional M wash from Optimum.  I have the Power Wash, and will do that and a iron removal after the winter.

I did the ceramic coating on the bumper.  For the grille and wheels I used some turtle wax ceramic spray.  The grill will always be getting touched up regardless if I ceramic coated it or not.  The wheels are like mirrors.  I'll do a simple spray and upkeep on them every few months when I'm washing.  It's quick and easy, took 15 mins to do all 4 wheels and the grill

 

after shine.jpg

Edited by shudog
  • Like 1
  • 2 weeks later...
Posted

it's been 2 weeks now since I coated my truck.  Had a bunch of snow this weekend and lots of salt on the roads.  Took out my hose yesterday and just sprayed the truck down, no soap, no sponge, nothing.  looks freshly washed.  

  • Like 3
Posted

Thanks for making this post OP! I've been shopping quotes for my sports-car for ceramic and I'm seeing like $1000-1600 for ceramic on the sports-car. Thought about doing it on my Sierra, but I truly don't wanna spend that kind of dough. I wash mine often, touchless. 

Posted
1 hour ago, ARedSierra said:

Thanks for making this post OP! I've been shopping quotes for my sports-car for ceramic and I'm seeing like $1000-1600 for ceramic on the sports-car. Thought about doing it on my Sierra, but I truly don't wanna spend that kind of dough. I wash mine often, touchless. 

you can do it yourself.  The actual coating process is the easiest part, more so than washing and claybar.  The polishing is not hard, just takes time to get it done right.  Buy a good random orbital polisher, I have a Porter Cable that works great.  Take your time, watch videos.  Prep is everything.  If you can spread it out over a long weekend like I did, you'll be a happy camper.  I might've mentioned already but the tiny bottle I got with the kit from Adams, I still have over half the bottle left.  Also have Graph Boost shampoo car wash, Graphene Boost spray and their "SC3" which is probably just a quick detailer.

 

 

  • Like 1
  • 1 month later...
Posted

been a couple months now since I did this.  Did a handwash this weekend in the garage using the Adams Graphene Boost car wash product.  Extremely pleased.  Washing with this stuff is incredibly "slick" with the suds lubricant, end result the paint comes cleaner with much less effort, rinsing with those leaves a near spotless finish and drying is a breeze.  The areas of plastics that I applied the ceramic coating to also look great still - the wheel well deflectors. the top of the bed rail and the steps...  still clean, looking good.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • When I had a Bumper subscription for a few days when I needed to run title histories on cars I was looking at, I decided to look up a few of my old/past vehicles.   My 2015 Silverado was still actively registered and it last sold in 2024 with 160k on the clock. No idea if that's on the original engine but someone's keeping it on the road or the original AFM stuff is still going.   It used 0w20. I remember feeding it Mobil 0w20 AFE for the first 30k of its life on <5k OCI's.
    • I can't say I have ever heard of someone getting that type of mileage out of a set of tires even though they rotated on a regular basis but without a doubt if the front end gets wear and those tires are no longer able to track straight it scrubs them off, and driving style and road surface make a huge difference as well.    However that is not what prompted me to comment as it was the new tire theme of sitting in storage waiting to be used scenario. I am sure some tires can last for quite a while in storage if its not too warm and out of the sunlight but unfortunately some tires the way they their rubber compound is formulated they can age and dry out even in a reasonably decent storage location. My brother ran into this maybe three years ago when he was looking at the tires that were on his dually truck and a combination of wear on the rear ones and noticing that the front tires had some cracks around the sidewall of the tire not far from the bead but he had replaced only the front ones not long ago with 2 of the remaining 6 he had left from the initial two sets of takeoffs he had all bought at the same time .... 10 years ago ! ( the years fly by, a truck that only gets used a bit to haul a camper during the summer and sits in a shed for a large part of the year ). That second set of 6 tires, two he had put on the front prior like I said and they had very little wear but those cracks were now present. So we go into the shed where the other 4 tires had been stored all this time and every one of them had the same cracks in the sidewalls and so in the end it amounted to throwing away 6 brand new but 10 year old takeoff tires into the dump that he got a deal on at a tire shop because they aged out. They were a Ford factory equipment BFG tire and those tires did not age well compared to some tires I've seen far older then that and did not show that type of aging. True, they always say up here anyway that 7 years is sort of a limit for age by rights, we don't have the intense prolonged heat that many of you have down in the states that just cook tires and depends on where the vehicle sits when not in use. GB, another words maybe had you bought a set of tires to store it would have been fine as long as you used them up fast enough but there are no guarantees when it comes to rubber, tires or of that other type stored in some guys wallets 😆
    • 2020 2500 HD...I had some trouble getting the key into the ignition switch but went in fine after applying some extra effort. Since then, the door chimes when open when the key is out of the ignition. Also, when I lock the doors with the switch on the arm rest, the driver door locks but then unlocks. (I can lock everything fine with the fob) The message on the little screen displays the "Engine Hours"...kinda weird.   I'm guessing something happened to the ignition switch and it thinks the key is still in there. I unplugged the batteries for 20 minutes, no change. There are a number of videos on YouTube but nothing I can find that address this specific issue. Ideas appreciated, thank you.
    • Based on what I can tell, yes.   As for updating it, its a mixed bag.  Updates do fix a lot of issues, but occasionally can create some oddities.  They do more good than harm though overall.     Here's what the most current one does and a  V171 Improvements Important: Improvements will vary by model, build configuration, system, and sales region. Not all vehicles have all features. OnStar and Wi-Fi may not work after remote start CarPlay may not automatically reconnect Part of the Driver Attention messaging screen may be in English even though the language is set to something else XM may not work After a dead 12V the radio may set to Arabic at each startup Bluetooth contacts might not be able to sync with the vehicle During an OTA the 12V battery may drain Customer might see a screen telling them to return to the dealer After changing the Wi-Fi SSID or password a device may not disconnect If a device is connected on the 2.4Ghz band, nothing will connect to the 5Ghz one, which could show as slow Wi-Fi speeds Customers might have noticed Wi-Fi dropping in certain areas and reconnecting later Customer might see the top of the screen blinking during Android Auto Android Auto may not connect CarPlay audio might momentarily cut out The "Add Phone" button may be grayed out The radio may not start up   V167 Most Notable Improvements:   Outside Air Temperature is incorrect. -You may see a popup message for Engine Shift. (Corvette Only) After changing the exhaust sound they get a popup that "mode change not applied", even though it was. -When changing volume, the volume bar is for Traffic instead of Audio. -(Corvette Only) Improvements to the placement of buttons and text. -If the customer receives the message "Apple CarPlay Could not connect", the cursor might move in the opposite direction than expected when using the control knob. -Android Auto automatically starts playing their music, even though they have turned that off in settings. -Intermittently they have a red OnStar LED with no OnStar function and/or no audio. -The minimum length of the Wi-Fi password was increased to 12 characters. -The popup message "Driver Attention Check, check your mirrors or Super Cruise will shut down" may not have come up on the display when it should have. -Startup animation added for 20th anniversary of the V-Series on Cadillacs. -The Navigation app received location improvements when going under long underpasses. -In the Navigation app there are filters for charging points that the vehicle cannot use.   V164 Most Notable Improvements Most notable improvements contained in this release may include: Apps Intermittently, an “SD Card Removed” message will pop up in the Navigation app. While in the audio app, the radio may stop working. Trailer Tire Pressure sensors may not be learned in the Trailer app. Not being able to return to the home screen while in the Camera app. After an ignition cycle, the radio might go to a black screen or stop working if using Sirius XM. Spotify icon truncated on Audio app.   SXM When changing power modes with the ignition switch, the HVAC pop up might appear. During startup, the radio will show the brand splash screen then go blank. Receiving a confirmation pop-up when changing drive modes. A “Return to Dealer” message may appear on the radio screen. SuperCruise setting toggle may not work. System After an ignition cycle, the radio might go black or stop working if using Sirius XM (SXM). Settings When performing a factory reset, the radio may stop working. After performing a factory reset, the radio may stop working when trying to switch users. When trying to go into the Language section quickly after startup, the radio may stop working. Projection Wireless CarPlay cannot be connected after unpairing another wireless Android Auto device. When the Android Auto screen comes up to connect wirelessly, the screen may freeze if the Cancel button is pressed. Removed the Apple CarPlay Cannot Connect screen when a device fails to pair during the autoconnect process. CarPlay information may not show up in the audio app. Near Field Communications (NFC) chime may be heard when NFC does not work. The Cannot Connect screen does not pop up after the first connection on wireless CarPlay fails. Apple CarPlay is now functional in Guam. Over the Air (OTA) When a software update is cancelled, the downloading logo may still be displayed. Energy When using the Energy app, the radio may stop working. When plugging in the vehicle, the display might show “Now” instead of “Charging Upon Plug In.” Instrument Cluster Voice recognition can be started while on an OnStar or phone call. When downloading contacts, there is a progress bar and circles on the Recents page of the cluster. The temperature on the cluster and the display may be different. After receiving and ending a call on the secondary paired phone, the cluster may get stuck on the phone menu. Bluetooth Intermittent Bluetooth connection loss.
    • Looking for help troubleshooting a metallic like front end rattle. Figured I’d see if anyone had thoughts before I schedule an appointment with the dealer.   The rattle is fairly loud and occurs primarily when the front driver side wheel hits a bump, even fairly minor road seams. Sometimes does it when the passenger hits a bump but I don’t believe when the rear hits. Rattle still occurs when foot is pressing brake peddle so I think that rules out the caliper rattle I’ve read about. I’ve also checked the running boards and they are tight.   Most noticeable at slow speeds.    Any insight is appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...