Jump to content

Scan tool

Lpfm1990
 Share

Recommended Posts

Lpfm1990 Enthusiast

Lpfm1990

Posted
Posted

Quick question, and not sure if this is even the right sub section for it? But wanting to grab a scan-tool. Don’t need the most “pro-level” tool, but enough to read codes and get into the oem side menu to view various modules for codes. Also bonus points if it works on a Toyota car also (I have a chr I use as a work ride to save on gas and wear on the truck) 

 

now I know it’s the new global b system on my new truck. So is there suggestions of a reasonable one? Doesn’t need to have a Bluetooth dongle either. There’s like 10 different ones and I have no clue to what’s a good one or a waste. 
 

thanks guys 

  • Like 1
SoCal Angler Enthusiast

SoCal Angler

Posted
Posted

I have been considering a scan tool for my ‘23 6.6L gas with 6 speed and Toyota vehicles.  I believe bi directional scan tools are preferred to allow for more than just pulling codes.

 

The Car Care Nut over on YT has pretty good things to say about one that he reviews on his channel.  He discussed its uses on Toyotas, but it works on most vehicles. Vid is 3 years old and no updates on the tool.

 

 

Capt Bob Enthusiast

Capt Bob

Posted
Posted

Not sure if this even fits what you’re looking for but, I running the Scan Gauge III.

It will give you codes and the ability to clear same but its basic ability is to provide real time engine operation parameters. Maybe not what you are seeking. It’s hardwired and so far, has worked very well on my 2024.

 

 

revrnd Senior Enthusiast

revrnd

Posted
Posted (edited)

Make sure what ever you're looking @ works on the current GM vehicles. I bought a Creader Launch Elite G. It only partially worked w/ my 2024. i bought the adapter that supposedly would correct this, it didn't.

 

I wanted to be able to adjust the TPMS thresholds, but am unable to w/ this tool. Apparently there are scan tools that do permit this.

 

I guess I can use it for any code reading...

Edited by revrnd
  • Like 1
revrnd Senior Enthusiast

revrnd

Posted
Posted (edited)
On 4/12/2025 at 10:13 AM, Chopper_Man said:

I use the Autel MK900-BT, does everything I need on all my vehicles.

 

Do you have anything newer than the 2022? According to others on here, GM changed the 'architecture' w/ the '23s or '24s. What worked on previous model years may not be compatible.

Edited by revrnd
Handy Enthusiast

Handy

Posted
Posted

I have been using a BlueDriver for several years.  It is very small which makes it convenient to keep in my center console, and move it from vehicle to vehicle for trips.  It interfaces with your smartphone via Bluetooth.  I have been getting a nuisance code on my 2013 C3500 for years, and while driving, I am able to plug in the BlueDriver, open the app on my phone, clear the code, unplug the BlueDriver, and toss it back in the center console.  I had a turbo code on my 2005 K3500 and went into limp mode while towing a trailer on a narrow canyon road.  I almost came to a stop with traffic behind me.  I was able to quickly plug the BlueDriver in, clear the code, exit limp mode, and resume my drive.  There was nothing wrong with the turbo, and it never came up again.  https://a.co/d/4IiAABx

Handy Enthusiast

Handy

Posted
Posted
On 4/11/2025 at 3:46 PM, revrnd said:

I wanted to be able to adjust the TPMS thresholds, but am unable to w/ this tool. Apparently there are scan tools that do permit this.

I purchased the Autel TPMS Programming Tool TS508WF 2024 Version after reading advice on this forum.  I used it to reprogram my 2024 2500HD tire pressure threshold down to 50 psi because that is what I run my tires at, and the low tire pressure warnings were a pain every time I started the truck.  It worked great, and I have also been able to use it to relearn the tire locations after a rotation.  A little pricey, but the cheapest way to reprogram short of having a friend do it.

  • Thanks 1
revrnd Senior Enthusiast

revrnd

Posted
Posted
On 4/14/2025 at 10:01 PM, Handy said:

I purchased the Autel TPMS Programming Tool TS508WF 2024 Version after reading advice on this forum.  I used it to reprogram my 2024 2500HD tire pressure threshold down to 50 psi because that is what I run my tires at, and the low tire pressure warnings were a pain every time I started the truck.  It worked great, and I have also been able to use it to relearn the tire locations after a rotation.  A little pricey, but the cheapest way to reprogram short of having a friend do it.

 

Thanks. I checked online & that sounds like what I should've bought in the 1st place. Any Canucks interested in what I posted previously, PM me...

revrnd Senior Enthusiast

revrnd

Posted
Posted

I ordered the TS501. Not really sure what the difference is, but is priced cheaper than the TS508

 

Screenshot_20250418_162444_Chrome.thumb.jpg.b4a8b033a2a8ced426999e7f5f65715e.jpg

 

Screenshot_20250418_185716_Chrome.thumb.jpg.904b10486c0ed13063d200d4625670a0.jpg

  • Like 2
Chuck FB Enthusiast

Chuck FB

Posted
Posted

I had bought my TS508WF from Napa and I got a little off of it so it was 325.00, then early this month Princess puts it on sale for 280.00 and actually that sale ends tomorrow as per April 20th. However with Princess you can either possibly get a raincheck if they don't have one in stock or if you have that sale catalogue you can typically walk in after the sale and point to the price in your catalogue and they will sell it for that price. The regular price at Princess is 400.00 so that was a crap price.

 

Good question about the 501 vs the 508, I am guessing that the 508WF would be the wifi difference but a regular 508 I have no idea.

  • Like 1
revrnd Senior Enthusiast

revrnd

Posted
Posted
38 minutes ago, Chuck FB said:

I had bought my TS508WF from Napa and I got a little off of it so it was 325.00, then early this month Princess puts it on sale for 280.00 and actually that sale ends tomorrow as per April 20th. However with Princess you can either possibly get a raincheck if they don't have one in stock or if you have that sale catalogue you can typically walk in after the sale and point to the price in your catalogue and they will sell it for that price. The regular price at Princess is 400.00 so that was a crap price.

 

Good question about the 501 vs the 508, I am guessing that the 508WF would be the wifi difference but a regular 508 I have no idea.

I've never thought of looking for scan tools @ PA before. If I'm in Oshawa, I usually make a stop @ the 1 next door in Whitby.

 

  • Like 1
Chuck FB Enthusiast

Chuck FB

Posted
Posted (edited)
11 minutes ago, revrnd said:

I've never thought of looking for scan tools @ PA before. If I'm in Oshawa, I usually make a stop @ the 1 next door in Whitby.

 

You certainly didn't miss out on anything with their regular price, just a fluke they happened to have a sale on them just to piss me off LOL. Certainly not worth 20.00 for a special trip and find they don't have any as their tracking of what the store website says they have and what they actually have are pretty sad at times and part of that is there system and part of it is certain items that walk out under someone elses power.

 

Some of what Princess will have in the way of scan tools are there because they are out of date and on their way out, not made anymore etc and probably got a smoking deal on them to flog off. The 508 isn't there yet in that category though.

Edited by Chuck FB
  • Like 1
revrnd Senior Enthusiast

revrnd

Posted
Posted

Supposed to arrive next Fri'. I'm sure I'll be asking a few questions. I'm not really all that savvy w/ this stuff LOL

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Black02Silverado
      Post your UOA, (used oil analysis) here

      By Black02Silverado · Posted

      Here's the second UOA on my 22 Wrangler with the Ecodiesel. This has 5k miles on AMSOIL Signature Series DEO 5w-40. The first one was dealer installed oil, no clue what it was, the second is what AMSOIL recommended, European FS 5w-40, Most of the Ecodiesel world is showing great results using the European MS 5w-40, I figured I would see how the DEO works. This is using an Ecoguard oil filter. It's my understanding this engine likes to shed aluminum.  We will see. So far I don't think this is too bad.    
    • revmanii
      Disable DRL's

      By revmanii · Posted

      I'm surprised nobody seems to offer a solution like the start/stop device I put in my new truck. Remembers my setting when shutdown. And while it still starts up in start/stop, it stores/evaluates what mode it was in when shut down and will change it whithin a second or 2 of startup. It'd be nice to have something like that for the DRLs.
    • btm
      Sunroof Drain Hole Entry & Exit Location (w/ Pictures)

      By btm · Posted

      2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • Chuck FB
      Joke Thread

      By Chuck FB · Posted

      An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...