Jump to content

What I Noticed


gregrocks89

Recommended Posts

Posted

So the other day I noticed that trucks should have some kinda of buzzer sound or something for when your tail gate is down or when your driving and it comes down. The new fords, gmc's, dodges, titans, and tundras dont have this. Like when you half ass close a door you get a door ajar sound right? So why not when you put your truck in drive and a sound goes off when your tail gate is down or when it falls down.

 

I just noticed with some of the newer trucks in the winter time the tail gate can be a bastard to close at times. We run rat packs at work and there has been times where the tail gate has fallen down and a drawer full of tools falls onto the highway.

Posted

Seems like a moot point to have that to me.

 

Kind of like how Caddys have the real loud clicks on the turn signals so old people won't drive five miles down the highway with them going.

 

 

Everytime I had my Tailgate drop while driving there was a pretty good THUD to let me know it happened.

 

 

Maybe a dashboard indicator light? :thumbs:

Posted

pointless...if you don't hear the thud or notice it down while driving you probably are too old for a truck and need a buick

Posted
Everytime I had my Tailgate drop while driving there was a pretty good THUD to let me know it happened

 

Yeah true enough, but lets say your driving down a highway with alot of frost heaves like we got here to. So after the 5th heave you hit your tail gate comes down to. There has been times where it has came undone driving back to the office and its been undone but luckily all our shit was still in it. just though it be a decent idea

Posted

Yeah, after I washed my truck one day I drove it down the highway, I guess I didn't shut it good. And when it fell down I thought one of my aftermarket drop shackles had broken. It's pretty noticeable.

Posted

Well, think about it. How often has your tailgate actually fallen open while driving?

 

 

I can count the number of times it's happened to me on one hand.

 

 

If anything, I'll meet you in the middle and say, an aftermarket application may be needed.

 

But not a feature that comes standard on all models.

Posted
Well, think about it. How often has your tailgate actually fallen open while driving?

 

 

I can count the number of times it's happened to me on one hand.

 

 

If anything, I'll meet you in the middle and say, an aftermarket application may be needed.

 

But not a feature that comes standard on all models.

 

 

Yes i totally agree with what your saying, but do you guys live in an area where theres lots of snow, -30 and colder temperature and run tonneau covers? Tail gates dont always like to close properly. Haha anyone is more then welcome to come take the work truck for a week and see how the tail gate closes. Thats what im saying. Anytime time in the summer or anything other season when the roads are smooth your going to notice. But you get rough lease roads, extreme tempatures and snow, tail gates dont always like to close. and all im saying it would be a decent idea if it did come undone a light or sound would come one or simply forgot it undone.

Posted
Well, think about it. How often has your tailgate actually fallen open while driving?

 

 

I can count the number of times it's happened to me on one hand.

 

 

If anything, I'll meet you in the middle and say, an aftermarket application may be needed.

 

But not a feature that comes standard on all models.

 

 

Yes i totally agree with what your saying, but do you guys live in an area where theres lots of snow, -30 and colder temperature and run tonneau covers? Tail gates dont always like to close properly. Haha anyone is more then welcome to come take the work truck for a week and see how the tail gate closes. Thats what im saying. Anytime time in the summer or anything other season when the roads are smooth your going to notice. But you get rough lease roads, extreme tempatures and snow, tail gates dont always like to close. and all im saying it would be a decent idea if it did come undone a light or sound would come one or simply forgot it undone.

 

 

 

 

I took that into consideration.... Hence why I met you in the middle. :thumbs:

Posted

As long as there is a way to shut it off so I don't have a buzzer or light going off when I want to have it down

Posted
So the other day I noticed that trucks should have some kinda of buzzer sound or something for when your tail gate is down or when your driving and it comes down. The new fords, gmc's, dodges, titans, and tundras dont have this. Like when you half ass close a door you get a door ajar sound right? So why not when you put your truck in drive and a sound goes off when your tail gate is down or when it falls down.

 

I just noticed with some of the newer trucks in the winter time the tail gate can be a bastard to close at times. We run rat packs at work and there has been times where the tail gate has fallen down and a drawer full of tools falls onto the highway.

 

Sounds to me like you need to grab a drill, a couple of hooks, and a 1 foot long piece of chain. Safety chain FTW. Plus it'll match your wallet-on-a-chain and you'll be tough. :thumbs:

Posted

never mind it falling down. What about when you open it to get something out and forget to close it. If you pull in the driveway and have to back out you wouldnt see it open before you left. I did that just the other day and thought that there should be some kind of light.

Posted
No need for another idiot light.

 

 

As long as there is a way to shut it off so I don't have a buzzer or light going off when I want to have it down

 

 

This has got to be the most stupidest innovation since the man-step.

 

I have my tailgate down when I haul long items, I don't need some annoying buzzer. Also how are your guys tailgates failing while your driving? I've never had or heard of that happening!

 

I'm glad I don't have this "buzzer"

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Is this the pan everyone is talking about PPE Power 128051910 . this can be gotten from JEGS. 
    • My truck is a 2024 2500 LT crew cab with the 6.6 gas engine and 10 speed trans.  It has a payload of 3578 lbs.  We pull a 22' Grand Design 17MKE that has dry weight of 5006 lbs. and a gross weight of 6395 lbs.  The trailer weighs about 5800 lbs. when loaded up with all the gear.  I don't fill the water tank for travel as most of our trips are to state parks that are within a day's drive.  Depending on the wind I get anywhere from 7.5 to 9 mpg.  I do use a weight distribution hitch (WDH) and have no problems with sway or being pulled/pushed side to side by 18-wheelers passing by me.  The trailer is about the same length of the truck so that helps a lot.  I say that because we traded in our 33' Grand Design 2670 MK (7800 lbs. loaded with gear) and using the same WDH, it would get pulled side to side by big trucks passing by me. It was not bad, but you needed to stay alert and know when a big truck was pulling up beside you.  I got about 7 to 8 mpg pulling that trailer.  I normally drive about 65 to 67 mph when pulling.  Overall, I love the payload capability of the truck as I doubt I will ever get close to its limit and I love the stability it offers over a half ton truck while pulling a trailer.  I have just over 30000 miles on the truck and have not had any issues.  We live in Texas where it is relatively flat, just windy. 
    • I will say though that the 5.00 a gallon for only one fuel stop while on the Number 1, that privilege of driving from the point of Paso Robles ( where I fueled up before crossing to the coast ) and all the way up ... across the Golden Gate where I stopped and walked on the bridge ( and someone jumped off the bridge opposite the side I was on ... never saw it happen but the tow truck/paramedic told me ) and continued on north back onto No 1 and all the way up to where it connects to 101 and also explored some of the Red Woods although had been through some of that before. The fantastic view of that scenic ocean route was most certainly worth the extra dollars I spent on fuel. Just prior to that I had driven through Death Valley and that was some experience in the middle of July, then spent a couple of days in Yosemite and hiked to the top of Half Dome. The summer of 2007 was very memorable for what I saw and experienced in California.
    • Really depends on what extent the towing is.  Are you going across the country on highways or to fairly local campgrounds?  If you're just local towing then I wouldn't derate your truck much, just make sure the weight of your trailer and equipment stays below your limit.  Which for my truck is 14500lbs bumper pull.  Yeah it will work hard when you're over 5 figures in weight but who cares if it is just say 50 miles.    In my opinion the main thing with towing campers is wind resistance.  My 3200lb single axle camper tows fairly hard for what it is due to the wind.  But then if I use my truck to tow a family members 8000lb camper it doesn't really feel any different as wind resistance is similar. I've also towed a 5000lb airstream and it barely felt like anything was there.
    • I think the excitement has run its course. Or, probably need a break from the truck for a few days.   Win some, lose some, again. There was still a coolant weep from the front of the engine. This time it was one of those worm-drive hose clamps on the upper hose connecting to the water neck. There's a reason the factory doesn't use those type of clamps; they suck. The hose is all distorted and flared at the end from someone over-tightening it. The water neck just needed to be cleaned, hose seated, and have a *good* hose clamp put on, if the hose wasn't so mangled.   Thought I'd kill two birds with one stone and try to diagnose the EGR issue. It's likely a failed EGR but before I spent $85 on the part I wanted to make sure ports weren't clogged or the pintle wasn't stuck. It was kind of a bugger to remove with the upper intake installed. Re-install (because I wanted to drive it) proved more difficult.   Per the stack of service paperwork, the EGR has already been replaced 4 times since 1996.   It would reason, then, that the EGR flange on the lower intake manifold has had its share of techs trying to work quickly and maybe one of them seated a bolt slightly cross-threaded at one time. The bolt didn't come out without significant effort and tried as I did, it wouldn't go in without significant effort. And then, the mounting ear on the right side of the EGR (lower intake casting) cracked, and crumbled off. $%&@!!!   I hate everything. Or, at least, I did in that moment. I was pretty calm, considering. This is what older, junky vehicles do. They nickel and dime their owners, piss them off, and things break that shouldn't break because of shoddy design/workmanship, poorly done repairs.   If I want to make it right, I'll need to replace the lower intake manifold and basically re-do everything I spent days doing. At least it should go quicker this time, right?! Looks like a lower intake (used/junk, of course) will run me about $150.   Once I get the new EGR, I'll see if I can bolt it up snug enough to verify proper operation, and if it solves the persistent CEL that sets on decel for EGR flow, I'll know I'm back on the right track. And then I can decide how to proceed.   Also, an idler pulley has given up. It began squeaking in pain on startup. It's clear this truck hasn't been thoroughly driven in a long, long time as things are just letting go and shaking out. I may have given it the beans once or twice to make sure my intake gaskets were doing their job. Flog an old vehicle, expect what it gives in return.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...