Jump to content

Recommended Posts

Posted (edited)
On 7/14/2018 at 4:26 PM, kstruckcountry said:

It isn't really a paint issue, on the exterior it has held up very well. The issue, at least on fenders and rockers on my pickup, is that the design incorporates folded seams, with spot welds. Dust and moisture collect there no matter what. Maybe with the proper treatment, it could be slowed down more. Or with glass bedsides.

Sent from my SM-G920V using Tapatalk
 

I've got rust bubbles forming underneath the paint on my Silverado. Thing is ALWAYS clean, and always parked in the garage at night, too. I chalk this up to cheap, shitty paint / clear coat.

 


Truck has sat for over a week, since I've been out in OH with my dad. I did manage to score a gallon of Methyl-Ethyl Ketone at an Amish hardware store though! Don't tell the MA authorities - I'll probably do time for possession ... :lol: Can't find any good chemicals in this state, thanks to the mental rejects that run it ...

Edited by Jsdirt
Posted pics meant for other thread, forgot to quote, and other screwups ....
Posted
On 16/07/2018 at 4:00 PM, Jsdirt said:

I've got rust bubbles forming underneath the paint on my Silverado. Thing is ALWAYS clean, and always parked in the garage at night, too. I chalk this up to cheap, shitty paint / clear coat.

 


Truck has sat for over a week, since I've been out in OH with my dad. I did manage to score a gallon of Methyl-Ethyl Ketone at an Amish hardware store though! Don't tell the MA authorities - I'll probably do time for possession ... :lol: Can't find any good chemicals in this state, thanks to the mental rejects that run it ...

So what do you use the MEK for?   I use it at work to flush my paint lines and gun.  

  • Like 1
Posted

I use it mainly as a fast cleaner - nothing takes stubborn crap off faster than MEK, aside from FIRE, lol. I also use it to rejuvenate my 20-40 year old touch-up paint tubes from time to time, when they dry out and become like molasses. Works great along the same lines with rubber cement for tire patches as well - those cans get left open longer than they should.

  • Like 1
Posted
I've got rust bubbles forming underneath the paint on my Silverado. Thing is ALWAYS clean, and always parked in the garage at night, too. I chalk this up to cheap, shitty paint / clear coat.
 

Truck has sat for over a week, since I've been out in OH with my dad. I did manage to score a gallon of Methyl-Ethyl Ketone at an Amish hardware store though! Don't tell the MA authorities - I'll probably do time for possession ... :lol: Can't find any good chemicals in this state, thanks to the mental rejects that run it ...


I buy Amsoil chlorinated brake cleaner whenever I go to Vegas. You probably still have better shit than I do.



Sent from my iPhone using Tapatalk Pro
Posted

Yeah, CA is REAL bad. I can't believe how far back they go on emission testing too. What a racket. I only lived there briefly.

Posted

Got tired of the dash and dashskin had a $10 off offer

6337138fa3c20de95a0515e986df6d3d.jpg

8f5b09b872c017de074719eb25d21401.jpg

40187a15a8065d52f603df4d68f6cd7d.jpg


Ryan B.

  • Like 2
Posted

Only thing nicer would be a reimbursement check from GM. :)

 

I'll hold my breath .... :lol:

Posted
Only thing nicer would be a reimbursement check from GM. [emoji4]
 
I'll hold my breath .... :lol:


[emoji87]


Ryan B.
Posted
that's a pretty nice fit


For $130 I am happy


Ryan B.
Posted

Better fit than the crooked mismatched POS I lost $$$ over on my tahoe that went right in the trash truck. "Yeah, you can return it, just pay the shipping that cost more than the item did"

Posted

Today after I got home from work I loaded the new wheels and tires in my truck to get mounted and balanced. Installed them at home. 235/35R19 doesn’t look bade6b7aea64e4c248edd5b916f55b33e77.jpg


Sent from my iPhone using Tapatalk Pro

  • Like 2
Posted

Had my fourth set of tires installed today, not to bad for me 3 sets to go 160,000 miles.  Brakes still looked good not going to do anything to them at this time.  :jester:

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...