Post your 2014+ wheel/tire set-up

[22_AT4]

Where did you guys get your black lug nuts? I just had my stock 2014 18"s painted matte black. Will post pics when sun comes out.

[diggman08]

skav what model goodyear tire is that? anyone know.

[AZGMCZ71Leveled]

I know your not rubbing, but how close is it?

I want the +14 offset with 285/60/20..little taller but little skinnier.

I think that will rub but all you can do is test fit

[EaZ8]

I think that will rub but all you can do is test fit

its hard to get a shop that will test fit, they all want deposits on stuff around here and honestly dont blame them.

 

im going to take some measurements as soon as i get around to installing my lift. ribs are finally healed so my only excuse is lack of indoor shop space and winter finally hitting.

by the way things are going its going to be april when it gets done.

[thethrill]

Anyone know what lift is necessary to run 37's on my factory 22's?

[skav]

skav what model goodyear tire is that? anyone know.

All terrain Adventure

 

 

Sent from my iPhone using Tapatalk

[RoadRacer81]

 

Changed wheels again

 

18x9 Black Rhino Sierras wrapped in 33x12.50x18

 

 

 

Do you remember the offset of these?

[5RWill]

 

Couldn't find a picture. Thoughts on Stock GMC 20s coated in plasti-dip or powdered coated anthracite on a metallic iridium truck? I need to create a truck building app or something like fuel has but with ample of amount of wheel choices, you can see what it would look like.

[BowHunter1]

 

Couldn't find a picture. Thoughts on Stock GMC 20s coated in plasti-dip or powdered coated anthracite on a metallic iridium truck? I need to create a truck building app or something like fuel has but with ample of amount of wheel choices, you can see what it would look like.

 

 

I'm in the same boat as you. I have the iridium metallic and don't want black or chrome but something in the middle and it is really hard to see what is going to look just right. We need a good simulator with a large volume of wheels to choose from!

[5RWill]

I've seen one with black chrome replica wheels of the stock gmc. And it looks good but I'm trying to avoid buying new wheels and if I do I definitely won't be going 20" Id prefer 17" and would likely end up with fuel trophy or anza in anthracite. I don't think black looks had per say there are some Toyota dark grey TrDs around here with black rims that look good. That said metallic iridium isn't really a consistent color. Depending on light it can look brown, silver/gray, and at night absolutely black lol. So it makes wheel choice a little difficult. I think anthracite, black chrome, or the matte silver looking finish on the all terrain rims would look good.

 

Though I want to see with my eyes what anthracite looks like. It's much more similar to metallic iridium.

 

I just know the shiny chrome doesn't flow too well with it. I've given thought to blacking out the outer trim as well.

[TBaganATX]

 

 

 

Do you remember the offset of these?

+24..

 

I'm about to put a zone 4.5' lift and switch my 35" off this.

 

 

[thethrill]

Anyone know what lift is necessary to run 37's on my factory 22's?

??????????

[scottsglock17]

??????????

 

You could try a 7" RCX Suspension lift + 1.5" Zone body lift. That may work. Just my opinion. Good Luck.

 

OR try this CST Suspension

 

http://cstsuspension.com/254-lift-kit-2014-1500-p-u-w-steel-oe-susp-8-inch.html

Edited February 8, 2015 by scottsglock17

[stevencox93]

??????????

I know a guy running 37s on just the rough country lift with -76 offset or something like that but he rubs like crazy so i say its do able on stock wheels or with the added 1.25" body lift. Also a lot who run 37s run the McGaughys 7-9" lift and clear up the 38s

[bluezerado]

20x9 0-Offset RDR Thunder Wheels with 33x12.50/R20 Atturo Trail Blade MT. RC Level 2.5" Front, 1" Rear, No Rubbing.