Post your 2014+ wheel/tire set-up

[Jeff5347]

OK that's great to hear!! How are they noise wise and wet weather? Now just curious on 20x10 or 20x9

 

Sent from my Nexus 6P using Tapatalk

Edited July 17, 2017 by Jeff5347

[jimmyboy8301]

OK that's great to hear!! How are they noise wise and wet weather? Now just curious on 20x10 or 20x9

 

Sent from my Nexus 6P using Tapatalk

theyre quiet

 

 

Sent from my iPhone using Tapatalk

[Timinsk]

Don't get full blown MTs. Get a hybrid like a ridge grappler or open country RT

 

 

Sent from my iPhone using Tapatalk

May I ask why? Luckily townfaire lets me have 30 days trying to the new tires and if im unhappy I can swap them. I'm looking for something to commute city/highway and then offroad the weekends, so I need well diverse tires but trying not to break the bank on nittos

[Brick1609]

OK..me again..yea I know this is getting frustrating. Since I've read a ton of the g2s suck I've dropped them...and with that have kinda shifted a little of what I want. I've looked thru this tread and google and everywhere and I've got some down so here's the question. I was planning on 20x9+1 but thinking a 20x10 -12. Reason being for later on when I lift. Also I'm just gonna stick to a 285/55/20 making sure I fit. That's the question too. I'm sure on a 20x9+1 that will fit but does anyone know if mounted to a 20x10 -12? Will the 20x10 require metal trimming or such or stick out too far? Carpet trimming is OK metal is not. Should I just stick to a 9 wide even if later on lifted ( maybe a 5")? The other tire is I'm looking at the Toyo oc at2. Anyone running these happy or have complaints on them? Gonna pull the trigger tomorrow and if the oc at2 is a good tire and a 20x10 -12 will fit on a 3 inch level I'll go that route

Sent from my Nexus 6P using Tapatalk

New guy here. I just installed some 20x10 xd riots -24 offset with 285/55/20 Falken Wildpeak at3ws on my 2016 z71 with a rough country 2in level I only trimmed the plastic. It only rubbed in reverse at full lock. Now it just rubs the carpet barely

[Brick1609]

New guy here. I just installed some 20x10 xd riots -24 offset with 285/55/20 Falken Wildpeak at3ws on my 2016 z71 with a rough country 2in level I only trimmed the plastic. It only rubbed in reverse at full lock. Now it just rubs the carpet barely

 

Sent from my SM-G920T1 using Tapatalk

[Sierra706]

May I ask why? Luckily townfaire lets me have 30 days trying to the new tires and if im unhappy I can swap them. I'm looking for something to commute city/highway and then offroad the weekends, so I need well diverse tires but trying not to break the bank on nittos

Loud, bumpy, less treadlife, more sensitive to proper rotation, worse wet weather on-pavement performance and less fuel efficient.

 

 

Sent from my iPhone using Tapatalk

[Jeff5347]

New guy here. I just installed some 20x10 xd riots -24 offset with 285/55/20 Falken Wildpeak at3ws on my 2016 z71 with a rough country 2in level I only trimmed the plastic. It only rubbed in reverse at full lock. Now it just rubs the carpet barely

 

Sent from my SM-G920T1 using Tapatalk

Brick,

Do you have any down the side shots...front and back. Are you happy with how much they stick out? I'm looking at the -12 but at least to get an idea on about how much it sticks out. Def appreciate you chiming in!

What I find funny is I met a guy at my friends campground this weekend that was running 285/55/20 cooper at3's. No lift or level but the older body style GMC...maybe an 11-13 year. I drove his truck to see how the coopers felt. No rub or anything and he def wasn't a guy trimming and cutting pieces on his truck. Only dif was he was running factory 20 inch rims. Assuming factory 20s must have a decent + offset that's what must make all the difference

 

Sent from my Nexus 6P using Tapatalk

Edited July 18, 2017 by Jeff5347

[Brick1609]

Brick,

Do you have any down the side shots...front and back. Are you happy with how much they stick out? I'm looking at the -12 but at least to get an idea on about how much it sticks out. Def appreciate you chiming in!

 

Sent from my Nexus 6P using Tapatalk

Yeah I'm pretty happy with it. Just what I was going for. Not too much, just a wider stance.

 

Sent from my SM-G920T1 using Tapatalk

[Jeff5347]

Yeah I'm pretty happy with it. Just what I was going for. Not too much, just a wider stance.

 

Sent from my SM-G920T1 using Tapatalk

Awesome thanks.. OK so mine will be a tad more tucked. Looks good. The wife is telling me these wheels better make the truck look tougher and be coming out from the fender...Upstate NY girl.

 

Sent from my Nexus 6P using Tapatalk

[SuperSierra]

I hate to be this guy, but don't forget to look into the laws in your area of how far a tire can stick out from the body. New York I don't think has any.

 

Here in Ontario you can't have anything sticking out with out having mud flaps or fender flare.

 

 

I know revised code of Washington states, “No person may operate any motor vehicle that is not equipped with fenders, covers, flaps, or splash aprons adequate for minimizing the spray or splash of water or mud from the roadway to the rear of the vehicle."

Must cover the tread width of the tire unless it's over 40 years old.

 

Pretty soon they want to outlaw lift kits in Ontario, they already won't let them pass a safety test if they aren't OEM approved lifts.

 

 

Sent from my iPhone using Tapatalk

Edited July 18, 2017 by SuperSierra

[Timinsk]

I hate to be this guy, but don't forget to look into the laws in your area of how far a tire can stick out from the body. New York I don't think has any.

 

Here in Ontario you can't have anything sticking out with out having mud flaps or fender flare.

 

 

I know revised code of Washington states, “No person may operate any motor vehicle that is not equipped with fenders, covers, flaps, or splash aprons adequate for minimizing the spray or splash of water or mud from the roadway to the rear of the vehicle."

Must cover the tread width of the tire unless it's over 40 years old.

 

Pretty soon they want to outlaw lift kits in Ontario, they already won't let them pass a safety test if they aren't OEM approved lifts.

 

 

Sent from my iPhone using Tapatalk

Damn man im sorry to hear that. Over here in CT you need Fender flares and rear flaps if tired go any wider than stock from fender edge. We do state a law that says no more than 4" than stock height but luckily cops don't enforce it

[Timinsk]

Loud, bumpy, less treadlife, more sensitive to proper rotation, worse wet weather on-pavement performance and less fuel efficient.

 

 

Sent from my iPhone using Tapatalk

What do you recommend then?

[Sierra706]

Damn man im sorry to hear that. Over here in CT you need Fender flares and rear flaps if tired go any wider than stock from fender edge. We do state a law that says no more than 4" than stock height but luckily cops don't enforce it

Believe it or not most states in the us will have some sort of law on lifts, offset, headlights, tints etc. Enforcement is usually lax. If your not being an **** and don't give the police a reason then you won't be bothered most of the time.

 

 

Sent from my iPhone using Tapatalk

[Timinsk]

Believe it or not most states in the us will have some sort of law on lifts, offset, headlights, tints etc. Enforcement is usually lax. If your not being an **** and don't give the police a reason then you won't be bothered most of the time.

 

 

Sent from my iPhone using Tapatalk

Mainly what I figured.

[SuperSierra]

Damn man im sorry to hear that. Over here in CT you need Fender flares and rear flaps if tired go any wider than stock from fender edge. We do state a law that says no more than 4" than stock height but luckily cops don't enforce it

Like I see where they're coming from, it's to stop backyard lift installs, making people not go way past the safe point of Centre of gravity, and not to creat more "blind spots".... but it falls under majority of people are dumb they ruined it for everyone else. You didn't always need a license to drive a car.

 

 

Sent from my iPhone using Tapatalk