Jump to content

Recommended Posts

Posted (edited)

Well, that was the first and last weekly show for now. It's been there for years, Tuesdays march through October. The neighboring business is a Target that recently got a car hating manager, who told the restaurant they don't want the spill over in their lot. So, Target is losing a lot of customers and the organizers are trying to find a new spot.

Edited by SnakeEyes
Posted

Took it for a ride

 

f2b5a30cf756cde8c85a0d8dcc83a4c6.jpg

 

 

Ryan

  • Like 1
Posted

I bought this 1986 3 years before you were born. I was 25 (your age now) at the time. My youngest (daughter) was born in 1989, when I was 28. Now my car is 28, and my daughter is 25, does that make me old? LOL

 

 

Memorial Weekend, 2014.

med_gallery_130182_2689_252613.jpeg

That makes you vintage. Lol

Posted

I let it run and started the list of shit to fix this spring (one including the parking brake) insurance will go back on this week

 

830b23541b69ff89b32affca9db1928c.jpg

Posted

Thanks

 

I had some dude in a Camry trying to bait me to race haha yea, I hit the gas a bit and I think he got the message he stopped immediately and backed off

 

 

Ryan

Posted

Thanks

 

I had some dude in a Camry trying to bait me to race haha yea, I hit the gas a bit and I think he got the message he stopped immediately and backed off

 

 

Ryan

Yeah, because you needed exhaust to beat him [emoji38]

 

After I got the long tubes on the Tahoe a guy in a Silverado did the same thing to my wife. He then literally backed away at the stoplight when she revved.

  • Like 1
Posted

No but the sound made it more evident

Posted

No but the sound made it more evident

Think the 6th will pace Indy like the rumors say? Would be a interesting move, not worry about sharing the spotlight.
Posted

I can't say much about it :) be prepared for an announcement in April

 

 

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...