Jump to content

Clearing your headlights


Recommended Posts

Posted

I just provided factual information. I think it's OK that you don't agree with it or don't think it's factual or don't think it's enforced. It's just information. Just sharing.

Thank you. Good information.

Posted

spur shot is right, you must have a yellow / amber color reflector in the front of your vehicle. it does not have to actually be a part of the light assembly it just has to be on the front of your vehicle. same as the back, you have to have a red reflectors on the back of your vehicle, again does not have to be apart of the light assembly, just has to be there.

 

is this law enforced heavily, no. can you get a ticket or fail inspection (if your state has it) yes.

Posted

spur shot is right, you must have a yellow / amber color reflector in the front of your vehicle. it does not have to actually be a part of the light assembly it just has to be on the front of your vehicle. same as the back, you have to have a red reflectors on the back of your vehicle, again does not have to be apart of the light assembly, just has to be there.

 

is this law enforced heavily, no. can you get a ticket or fail inspection (if your state has it) yes.

 

I was saying the same thing in all of my comments, that as long as you have an amber color bulb then you'll be fine...

Posted

Drove a subaru with clear corners and amber bulbs for 4 years. Drove a 94 silverado with clear corners (still has clear corners, but my uncle drives it) for.. about 12 years now, never had anything said to me about it. Drove a 97 mountaineer for 7 years, 5 of which had clear corners and CLEAR bulbs.. never a word.

 

You go puting blue bulbs in there a cop's gonna say something. :lol: but unless the cop just wants to ding you for as much as he possibly can, you're good methinks. You'd probably have to be stopped for something else AND the cops having a bad day/just doesn't like you before you'd get any kind of ding on it legality wise. I never sweated it with my Subaru (and it looked MUCH better than with the amber.)

Posted

 

I was saying the same thing in all of my comments, that as long as you have an amber color bulb then you'll be fine...

 

amber bulbs are not the same as reflectors. the reflectors are for when you are parked and a car driving down the street headlights shine on your car they are able to see the reflectors. if your car is not on and you dont have the reflectors then their lights will not reflect.

 

again im not saying dont do it. I just like spur shot is saying if you do do this then just know that you can get dinged for it.

Posted

 

amber bulbs are not the same as reflectors. the reflectors are for when you are parked and a car driving down the street headlights shine on your car they are able to see the reflectors. if your car is not on and you dont have the reflectors then their lights will not reflect.

 

again im not saying dont do it. I just like spur shot is saying if you do do this then just know that you can get dinged for it.

 

I understand the reflector part. But, think about it, if you're driving at night you'll see the car itself before you see the light reflecting off of reflectors. I know reflectors do help obviously, just saying they're not really a must have. Especially since vehicles are coming out with brighter and brighter lights from the factory. I know that there's still older cars out there and some that aren't taken care of so only have 1 headlights, but even the 1 headlight you'll see the car. The reflector needs light to reflect and if your light is reflecting off of them then that means the light is on the car so you'll see the car. It's not like cars are small like a bicycle, unless you talk about a smart car where those little sh*ts need all the advantages they can get. EVen some placed reflectors aren't good enough on a bicycle, some places you need actual headlight and flashing tail lights.

 

So again I know he's just giving the info which I see is true, I'm just looking at it from a real world POV. Wasn't attacking him or anything. I just got a little defensive when he called it a "web myth" to have amber bulbs with clear corners, almost like it's rare when I see it all the time and I had my 98 with clear corners and amber bulbs for 10 years and they were on there when I got it used so even longer on the truck.

  • 9 months later...
Posted

Any other pics of clear corners? Or opinions? I have my new to me LTZ headlights apart and am debating whether or not to remove the amber reflectors. My truck is silver for what it's worth. I have the headlights apart for a retro and because there was dust in them.

  • 5 months later...
Posted

Here is a link to clear corner lenses. Avail in smoke as well. A little pricey but are quality looking and we'll look 500 times better than the Amber lense And will allow me to install my switchbacks and give it that finished look without changing too much.

 

http://klearz.com

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Most say the oil temperature needs to above the boiling point of water to rid it of moisture and long enough to dry it. Many think that is about a hour at 212 F or more. Those people have never line dried cloths in a Midwest winter. Leave a pan of water sitting on the counter and eventually it all evaporates. So heat drives the time it takes. Water in oil under 175 F, the Nitration initiation temperature, is a minimum then for temperature and samples I've done that use Karl Fisher method say about a hour (in a healthy well tuned motor) over 175 F will dry it to under 800 ppm. Low enough to not be much of a factor. Motors with weak rings will take longer and the colder the air temperature the longer it takes.   On a cold motor there is also the condensation temperature. Blowby gases that contain moisture are subject to that cold cylinder wall, like sweat on a glass of ice tea. But also subject to the Law of Partial Pressures. Wear studies by GM and the DOD  indicate wear is a real issue below 85 F and a concern to 140 F but doesn't become a minimal factor until about 160 F. You know this intuitively when you see water vapor exit the exhaust pipe until the system gets above the dew point. It isn't magic, it's physics and it fascinates me. I know you didn't ask but....I over share sometimes. 😉    You keep the Camaro's high and tight.  
    • Move further away.   Benefit of living out - none of our cars get short cycled, plenty of warm up time.   Curious how much time/temperature it takes to drive moisture/condensation out of the engine?
    • Switch a a 100% synthetic trans fluid, Amsoil works for me.
    • First of all sorry, I know there are a ton of transmission temperature threads...   My truck is a 2025 LZ0 High (10l89 10-speed) High Country with NHT max trailering package. The NHT package is supposed to have "enhanced cooling."   Normally the trans temp sits around 200. It seems like with any real stress it quickly jumps into the 220s (for example climbing a grade unloaded at lower speeds). I haven't towed much with this truck, but I'm concerned if it gets this hot unloaded.    I've tried a few different things to keep the temps down (tow/haul mode, sport mode, low range when that makes sense) and nothing seems to affect it.    I'm curious if others are the same behavior or if anyone has found techniques to keep the temps down. It seems like it just can't handle reduced airflow at lower speeds, even with relatively light loading.    Thanks!      
    • I'm at 105,000 miles on my baby Duramax. No issues yet. I hit 31 mpg's traveling through hilly terrain to a project in Colorado. I will buy another 3.0. I'm not concerned.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...