Jump to content

rdnckhntr94's 2014 Silverado High Country Build

LongrangeLauber

By LongrangeLauber
in Member Build Threads

 Share

Recommended Posts

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

Pained me to do it but I drilled into my center console today, mounted a phone holder since I drive a lot, give it a "forever home" for when I use GPS and for it to charge. Was hard to do the first screw but once I was committed I figured there was no turning back now lol. Think it turned out halfway decent for a 10 minute job. It came with a crow foot to stick under the seat hold down nut but daggone GM has studs up there instead now. Oh well, I think I'll like it, only cost me $17 with free prime shipping

 

dd4e4d0b8cf4d826caf05a3cb1d85060.jpg

 

687fb09211c064fa14e3f5242e41ac8b.jpg

 

0dfc37366a0fcb26458a6cd03b54193a.jpg

 

As you can tell I put the mount as low as possible to that trim piece in order to cover the screws up in order to try and keep it somewhat hidden

 

Sent from my SM-N920V using Tapatalk

 

Sent from my SM-N920V using Tapatalk

  • Like 1
  • Replies 361
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

LongrangeLauber
LongrangeLauber

Removed the air dam just now. Makes a world of difference. Sorry forgot to take a before pic     Still want to lift the nose up so looking into level kits as we speak. Measurements that I took ye

LongrangeLauber
LongrangeLauber

Just ended my 800 mile round trip towing about a 3600 pound trailer, 400 pounds of gear in the bed, plus the truck had 4 full sized adults in it. Worked it up and down the appalachian mountains. She w

LongrangeLauber
LongrangeLauber

Well, figured what better time to start a build thread than on a new truck since I never did do one on my 02. Anyways, bought the truck November 29, 2014 and as of right now, a few days later, its sti

Posted Images

JoJoSilverado Enthusiast

JoJoSilverado

Posted
Posted

What keeps the bendy looking support (technical name escapes me at the moment) from folding with the phone on it? Or bumps and such? Is it fairly sturdy or quite flexible?

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

What keeps the bendy looking support (technical name escapes me at the moment) from folding with the phone on it? Or bumps and such? Is it fairly sturdy or quite flexible?

It seems to be an aluminum tube that is very rigid and is sort of hard to bend, definitely takes two hands. Only issue I have with this mount is it may vibrate due to its rigidity. I'll see how bad it is tomorrow morning on my way to work. If it's bad I'll get some rubber bushings or washers to stick under the mount, maybe it'll help absorb vibrations

 

Sent from my SM-N920V using Tapatalk

JoJoSilverado Enthusiast

JoJoSilverado

Posted
Posted

May be slightly ghetto, but you could also maybe loosen it up a bit and stick some Styrofoam or something through above/between the screws if that doesn't work. Maybe cut the sides off so it is "hidden/tucked" underneath the square mount piece.

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

May be slightly ghetto, but you could also maybe loosen it up a bit and stick some Styrofoam or something through above/between the screws if that doesn't work. Maybe cut the sides off so it is "hidden/tucked" underneath the square mount piece.

Think it would be better than rubber bushings/ washers?

 

Sent from my SM-N920V using Tapatalk

JoJoSilverado Enthusiast

JoJoSilverado

Posted
Posted

Can't say. But it may be a cheaper/quicker solution to try before spending the money on those. Worth a shot to just cut a square out of a cup or something. Or if you have some excess thin rubber laying around that you could snip a small bit out. Or even an old t-shirt.

 

I would want something with some thickness, but I also don't know how much it will rattle if any. I just feel like it'd be more comforting to have some soft thickness in there.

 

I'm a bit of a worry-wart so I often don't wait to see if it will rattle, I just expect it to be horrid lol. Rubber bushings/washers aren't expensive, and it'll definitely be more visibly appealing than my suggestions. I'd go with those first and see if they solve the problem (if there is one at all) to retain more of the aesthetic appeal.

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

Can't say. But it may be a cheaper/quicker solution to try before spending the money on those. Worth a shot to just cut a square out of a cup or something. Or if you have some excess thin rubber laying around that you could snip a small bit out. Or even an old t-shirt.

 

I would want something with some thickness, but I also don't know how much it will rattle if any. I just feel like it'd be more comforting to have some soft thickness in there.

 

I'm a bit of a worry-wart so I often don't wait to see if it will rattle, I just expect it to be horrid lol. Rubber bushings/washers aren't expensive, and it'll definitely be more visibly appealing than my suggestions. I'd go with those first and see if they solve the problem (if there is one at all) to retain more of the aesthetic appeal.

I have self tapping screws in there now, but I could always do a nut and bolt to make it sturdier once I do the washers. I definitely want some thickness to help dissipate the vibes. I'll figure something out if it even gives me any issues

 

Sent from my SM-N920V using Tapatalk

  • 2 months later...
STINSAN3 Senior Enthusiast

STINSAN3

Posted
Posted

How are you liking your setup? Ride was? I'm just looking to level mine for now. Either thought about 2" leveling kit or should I upgrade to Bilsteins 5100s all around and place it on the top setting on the front?

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

How are you liking your setup? Ride was? I'm just looking to level mine for now. Either thought about 2" leveling kit or should I upgrade to Bilsteins 5100s all around and place it on the top setting on the front?

If I were to do it over, I'd go with the Fox 2.0 coilovers honestly. From what I've heard these trucks ride so much nicer wth those installed. I'm on the edge of trading the truck in for a 2500hd so I don't wanna put the Fox coilovers on and waste the money on them if I upgrade

 

Sent from my SM-N920V using Tapatalk

STINSAN3 Senior Enthusiast

STINSAN3

Posted
Posted

How much are those? lol

 

If I were to do it over, I'd go with the Fox 2.0 coilovers honestly. From what I've heard these trucks ride so much nicer wth those installed. I'm on the edge of trading the truck in for a 2500hd so I don't wanna put the Fox coilovers on and waste the money on them if I upgrade

Sent from my SM-N920V using Tapatalk

  • 2 months later...
LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

How much are those? lol

 

Around 400 a piece lol

 

On a side note, I did an oil change today at 81,660 miles. Also re did the black vinyl overlay for the bowties. I keep fudging them up so back at it again when I feel like it. I always forget to update this thread when I do stuff to the truck lol

 

Sent from my SM-N920V using Tapatalk

  • 2 weeks later...
LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

Currently installing a 6" BDS lift and it's proving to be more than I expected, it's getting the best of me. Can't turn back now since I already hacked up my differential and parts of my frame. Full details to follow, but for anyone looking at a BDS lift, just don't do it. I have had good luck with the McGaughy's lift on my old truck, should have just stuck with them. Next truck I'll know. Should be done this week, I was hoping by the end of the weekend but there are some broken parts thanks to me lol

Daryl LBZ Senior Enthusiast

Daryl LBZ

Posted
Posted

Currently installing a 6" BDS lift and it's proving to be more than I expected, it's getting the best of me. Can't turn back now since I already hacked up my differential and parts of my frame. Full details to follow, but for anyone looking at a BDS lift, just don't do it. I have had good luck with the McGaughy's lift on my old truck, should have just stuck with them. Next truck I'll know. Should be done this week, I was hoping by the end of the weekend but there are some broken parts thanks to me lol

Well this came out of no where! Lol!

  • Like 1
LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

Well this came out of no where! Lol!

That was the surprise I was holding back for a couple weeks lol

 

Sent from my SM-N920V using Tapatalk

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...