Jump to content

V16 Turbo LED 30w 3600 Lumens 9006 Headlights


Recommended Posts

Posted

These are a pair of used, but like new V16 Turbo LED headlights - bulb size 9006 / HB4.


 


I had these installed in 2015 GMC Sierra since early May of this year. I'm trading in my Sierra this week and I pulled theses out and replaced the factory bulbs. With the later sunsets I rarely do any night time driving and my truck has the factory LED daytime running lights so these barely got any use.


 


Location: Gorham, Maine


Price: $35 shipped


Payment: PayPal


 


Power : Powerful 60W/SET (30w/bulb)


Lumen : 7200 Lumens/SET (3600 Lumens/bulb)


LED Type : CREE MT-G2 Chip


Voltage Range: DC 8V-48V


Color Temp: 6000K


Bulb Size : 9006/HB4


Shell Material : Aviation Aluminum


Beam Angle : 360'


Working Temp : -40'C - +80'C


Package Contents: 2 X Cree LED Headlight Bulbs with Mini LED driver /wire


 


Features:


The cooling Fan solid aluminum military Standard grade


Aluminum housing, perfect heat dissipation design.


High power Cree-MT-G2 chips LED, 60W per set or 30W per bulb.


High luminous efficacy Flux: Up to 7200LM per set or 3600LM per bulb, high reliability.


Wide-range voltage, constant current control, anti-interference circuit design


300% brighter than your stock Halogen headlights


Beam Angle 360 degrees


Low Power Consumption.


Easy installation, just plug and play.


 


 


post-50660-0-65765400-1470776146_thumb.jpg

post-50660-0-78497200-1470776155_thumb.jpg

post-50660-0-52757200-1470776165_thumb.jpg

post-50660-0-65765400-1470776146_thumb.jpg

post-50660-0-78497200-1470776155_thumb.jpg

post-50660-0-52757200-1470776165_thumb.jpg

post-50660-0-65765400-1470776146_thumb.jpg

post-50660-0-78497200-1470776155_thumb.jpg

post-50660-0-52757200-1470776165_thumb.jpg

post-50660-0-65765400-1470776146_thumb.jpg

post-50660-0-78497200-1470776155_thumb.jpg

post-50660-0-52757200-1470776165_thumb.jpg

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...