Jump to content

Recommended Posts

Posted
I ended up cutting the pink wire on the #13 slot. 

Works fine now. They’ll turn on at night as running clearance lights and front turning signals work now too.

 

still don’t know where the reduced steering message is coming from. Might just need a new bcm.

 

This is what I figured. So cutting pin 13, which is the turn signal slot should fix it. So your front and rear turn signals should work. You end up with no turn signals on the mirror right?

 

I don’t know why they tie them together in the mirror.

 

If you left pin 13 in, and cut pin 1, then the Amber light would function as a turn signal.

 

 

Sent from my iPhone using Tapatalk

Posted
37 minutes ago, pgamboa said:

This is what I figured. So cutting pin 13, which is the turn signal slot should fix it. So your front and rear turn signals should work. You end up with no turn signals on the mirror right?

 

I don’t know why they tie them together in the mirror.

 

If you left pin 13 in, and cut pin 1, then the Amber light would function as a turn signal.

 

 

Sent from my iPhone using Tapatalk

You are correct sir, all depends on what the user wants. I like the mirrors as a running light and cutting the pink wire or wire #13 gave the tow mirrors a running light option. 

 

Yes, if you cut the #1 wire it would function as a turning signal.

 

i appreciate your help!

 

I did check the housing, they are connected together. 

  • Like 1
Posted
Hey phil gamboa, i have a 2017 denali hd that came with dl3 mirror and i want to upgrade it to dqs tow what should i do.

Please PM me. Everyone’s upgrade path is different.


Sent from my iPhone using Tapatalk
  • Thanks 1
Posted

Hey Phil Gamboa. I was wondering if you know what size the terminals are in the door harness. I have a 2015 chevy silverado 1500 LT. The proper pins are in place its just a matter of adding the female terminals. I am looking at buying some to do this upgrade but cant figure out what size they are. You happen to have any idea? Thanks


Sent from my iPhone using Tapatalk

Posted

Mr Gamboa, I am wanting to upgrade my mirrors on my 2017 Chevy Silverado 1500.  It is a crew cab, shortbed, 5.3 liter with the included towing package.  I currently have the DL8 mirrors and I would like to upgrade to the towing style.  I have several questions about some of the information regarding my pickup as is.  Not quite sure how to private message you.  I would also be happy to give you my office telephone number as well.

Posted

Don't know if it's been asked, but has anyone attempted to add their own puddle light to their tow mirrors that didn't come with any?

  • Like 1
Posted
Don't know if it's been asked, but has anyone attempted to add their own puddle light to their tow mirrors that didn't come with any?

I haven’t done it, but it looks fairly easy. Hardest part is maybe sourcing the Puddle Lamp. Looks like you drill a hole, push the puddle in. You’d have to run the wiring but it seems doable.


Sent from my iPhone using Tapatalk
Posted
1 minute ago, pgamboa said:


I haven’t done it, but it looks fairly easy. Hardest part is maybe sourcing the Puddle Lamp. Looks like you drill a hole, push the puddle in. You’d have to run the wiring but it seems doable.


Sent from my iPhone using Tapatalk

Ya that's what I was thinking.  I wonder where we'd start to find the puddle lamps?  I have some tow mirrors now, they have heat and folding, but the only thing they didn't come with was the puddle that I wanted.  I couldn't pass up the price

 

  • Like 1
Posted
If these do end up being plug and play please let me know. Saves lots of time, money, and energy being easy install rather than new adapters, harnesses, etc. 


Just installed them and it was pretty quick/simple and plug and play. Pretty happy with them for only $175. Haven’t driven yet to see if they shake at all. I did install the 4th stud. Couple pics of the mirrors installed on dirty truck.

b515763440ce1e16a3ad4c53101baf78.jpg

7be98fd8e30fa02c4e5dc549b0299d80.jpg


Sent from my iPhone using Tapatalk
Posted

Hey i have a 2015 silverado 1500 with dl8 mirrors that i want to upgrade to tow mirrors!...i bought the mirrors installed them but like everyone else nothing works...i wanted to know how much for your custom harness or a diy harness please let me know thanks!!

  • Like 1
Posted
Hey i have a 2015 silverado 1500 with dl8 mirrors that i want to upgrade to tow mirrors!...i bought the mirrors installed them but like everyone else nothing works...i wanted to know how much for your custom harness or a diy harness please let me know thanks!!

All this info is in the first post.


Sent from my iPhone using Tapatalk
  • Like 1
Posted

Just wanted to thank you Phil for all your knowledge and info on this topic. Although I didn't purchase anything from you, this thread made me confortable enough and even susuccessful in swapping my DL8 mirrors for aftermarket tow mirrors. The new mirrors have heat, power adjust, cargo lights, and clearance lights that all work properly (with a little wiring for the lighting of course). Thanks again!

 

 

40927660cdad71a348fddcbe1c842e05.jpgcd01ff1f337d59eeac1d9117beae810e.jpg

  • Like 1
Posted
Just wanted to thank you Phil for all your knowledge and info on this topic. Although I didn't purchase anything from you, this thread made me confortable enough and even susuccessful in swapping my DL8 mirrors for aftermarket tow mirrors. The new mirrors have heat, power adjust, cargo lights, and clearance lights that all work properly (with a little wiring for the lighting of course). Thanks again!
 
 
40927660cdad71a348fddcbe1c842e05.jpgcd01ff1f337d59eeac1d9117beae810e.jpg

Excellent! I enjoy helping folks achieve their upgrade desires whether one buys from me or not. Nice truck!


Sent from my iPhone using Tapatalk
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...