Zachs_Alligator's 2017 Twin Turbo RCSB Silverado build

[Zachs_Alligator]

Intercooler mockup

 

 

Welded turbo drains to the valve covers.

 

Installed LT4 injectors and mechanical fuel pump.

[Zachs_Alligator]

http://imgur.com/a/5poYW

 

Try this link instead.

[Black Denali Canada]

Very cool !

 

 

Sent from my iPhone using Tapatalk

[Zachs_Alligator]

Very cool !

 

 

Sent from my iPhone using Tapatalk

 

Thanks. The turbos will be facing each other just above the motor. The downpipes will be exited through the fender. I want as much turbo whistle as possible.

[gastonhector]

Nice proyect, what tire do you have?

[Zachs_Alligator]

Finally getting to the turbo fabrication. Half the charge pipe is done. Manifolds are getting done tomorrow.

 

 

[Zachs_Alligator]

Nice proyect, what tire do you have?

 

I have nitto 420s's 285 55/20s. I'm going to order a set of 275 M&H race masters for my stock 17s for the track.

[GMdenali831]

looking good man, sub'd for the final product.

[Zachs_Alligator]

Charge Pipe Routing

 

Mocking up a 4 into 1 T3 collector.

 

Using an argon purge plate to ensure good welds.

 

Some more weld porn.

 

 

Truck construction should be done by Sunday, then my builder is going on vacation for a few days. When he comes back he'll tune it.

[Zachs_Alligator]

Finished up a lot this weekend. By next weekend it should have a tune on it and been driving. Enjoy.

 

Made a jig where the turbo flange needed to be in relation to the header flange:

 

 

Tack welded together, Driver side manifold:

 

All welded up and wired wheeled for a shiny appearance:

 

Tacked up the passenger side manifold. No more support bar needed:

 

An up close shot:

 

Looking like a normal truck again:

[Str8Ugly]

Man I wish I had the room under my hood for twins

 

 

Sent from my iPhone using Tapatalk

[Zachs_Alligator]

Man I wish I had the room under my hood for twins

 

 

Sent from my iPhone using Tapatalk

From what I can see, you can still fit them tubbed. We didn't need to move anything other than a few hoses. I am running fender dumps so my exhaust is going right out the side.

[Str8Ugly]

From what I can see, you can still fit them tubbed. We didn't need to move anything other than a few hoses. I am running fender dumps so my exhaust is going right out the side.

Fuse box is in the way on the drivers side and coolant tank is in the way on the passenger side on my truck. We are going to attempt a whipple supercharger on it though

 

 

Sent from my iPhone using Tapatalk

[Zachs_Alligator]

Fuse box is in the way on the drivers side and coolant tank is in the way on the passenger side on my truck. We are going to attempt a whipple supercharger on it though

 

 

Sent from my iPhone using Tapatalk

Ahhh gotcha. A supercharger will def fit then. Turbos can go anywhere if you have a good fabricator. I've had superchargers and turbos are leaps and bounds better in terms of reliability and power delivery if setup properly.

[Diaz_13]

Wow. The works that goes into this is real dedication. Can't wait for some videos of this beast!