Jump to content

Rear Sliding Window

WesternMike
 Share

Recommended Posts

Csjumper2003 Enthusiast

Csjumper2003

Posted
Posted

Got the window tinted. 457d0d1b68aad47ea9cda1d8dff1a0ad.jpg

 

 

Again thanks to@pgamboa for all the help with chasing wires and locating pieces I needed.

 

Sent from my iPhone using Tapatalk

  • Like 1
  • 3 years later...
  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Static
Static

I personally think the sliding rear window is ugly. I wish GM did what Toyota did and had the entire glass slide down. That would be something to have IMHO.

WesternMike
WesternMike

From looking at the other thread I got the other parts needed. I also changed them so they're easier to find.   Console Trim - 23104422 - $29.06 *W/ Homelink Switch - 22774498 - $38.56 Connector

Anthonyvee90
Anthonyvee90

I ended up doing the titan window since the sliding one was small in my opinion

Posted Images

David W S Enthusiast

David W S

Posted
Posted (edited)

@Csjumper2003

 

I'd be very curious what option truck you're staring with (I have an LT1) and what was in place.

 

  1. What is the part number of the fuse block you installed?
  2. Were the wires between the driver's fuse block and the plug for the over head console in place?
  3. Were the wires that go from the overhead console plug to the instrument panel in place?
  4. Where the wires that went from the instrument panel to the rh fuse box in place?
  5. Were the wires that went from the rh fuse box to the <motor location> in place?

 

I can't imagine #5 was present. If not... did you simply have to add those two wires from the fuse block back to the motor location? Pictures would be awesome.

 

I just swapped out my overhead console for one with HomeLink and it also had the rear window button. A button that does nothing is not sitting well with me. I'm just glad I didn't buy a console with the sunroof buttons, too.

 

Edited by David W S
PFTX_5.3 Enthusiast

PFTX_5.3

Posted
Posted
6 minutes ago, Anthonyvee90 said:

titan window

A window out of a Nissan Titan?

PFTX_5.3 Enthusiast

PFTX_5.3

Posted
Posted
4 minutes ago, Anthonyvee90 said:

Yes

Interesting, didn't know that a titan window would fit

  • Like 1
Anthonyvee90 Enthusiast

Anthonyvee90

Posted
Posted (edited)
15 minutes ago, PFTX_5.3 said:

Badass, I spot a mirror camera too

good eye

Mirror-says sold out but if you message him, he’ll sell it to you.Mirror

Camera-Part#84486910

Cable-Cable

3rd brake light Gasket-Gasket

3rd brake light still works

ycs8n4egcr0c1.webp

3fyw01egcr0c1.webp

Edited by Anthonyvee90
added pic
  • Like 3
Buckwild27 Enthusiast

Buckwild27

Posted
Posted
7 hours ago, Anthonyvee90 said:

wired to oem switch

IMG_6526.jpg

I would like more information on the wiring to the oem switch. I am planning on doing this and was going to wire it to the oem switch myself. 

Anthonyvee90 Enthusiast

Anthonyvee90

Posted
Posted
3 hours ago, Homewrecker007 said:

I would like more information on the wiring to the oem switch. I am planning on doing this and was going to wire it to the oem switch myself. 

Sorry what I meant to say was wired to oem switch location with after market button. Wired to oem switch but wouldn’t work 5 pin usually is

pin1:window motor

pin2:ground

pin3:12v

pin4:ground 

pin5:window motor 

but couldn’t get it to work if you figure it out let me know please

  • Like 1
PFTX_5.3 Enthusiast

PFTX_5.3

Posted
Posted
12 hours ago, Anthonyvee90 said:

good eye

Mirror-says sold out but if you message him, he’ll sell it to you.Mirror

Camera-Part#84486910

Cable-Cable

3rd brake light Gasket-Gasket

3rd brake light still works

ycs8n4egcr0c1.webp

3fyw01egcr0c1.webp

I've thought about it but I rarely use that mirror, my first car didn't have one so I got in the habit of only using my side mirrors

  • Like 1
Buckwild27 Enthusiast

Buckwild27

Posted
Posted
6 hours ago, Anthonyvee90 said:

Sorry what I meant to say was wired to oem switch location with after market button. Wired to oem switch but wouldn’t work 5 pin usually is

pin1:window motor

pin2:ground

pin3:12v

pin4:ground 

pin5:window motor 

but couldn’t get it to work if you figure it out let me know please

Will do. It might be awhile before I get to that the 2014 is nearing time for a new engine. I'm saving up for a l8t swap. 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      PF63 Oil Filters Going Away?

      By Another JR · Posted

      I went to order some PF63 oil filters from an on line GM parts source, and the blue PF63 oil filters seem to be getting phased out. They show the new part number as 19363567, which is a black colored AC Delco Silver product apparently marked PF63A. Some sites show a part number 12693541, which is a black colored AC Delco Ultragard Gold filter marked UPF63R.    I assume the UPF63R is the better one, but I’d be happy if I could just get blue PF63 filters I’ve been using.    Can anyone explain what is going on with the filter part number changes and any actual design changes?  Any other advice on buying OEM filters right now?  Thanks 
    • davester
      HELP! DUMPING COOLANT

      By davester · Posted

      thanks for coming back and posting what the fix turned out to be.
    • Grumpy Bear
      Post your UOA, (used oil analysis) here

      By Grumpy Bear · Posted

      Only TAN I have for the product was at 5K in service miles and it was 2.71
    • SwitchBladeSierra
      HELP! DUMPING COOLANT

      By SwitchBladeSierra · Posted

      If anyone lands here looking for an update - the problem wasnt with the hose, the clamp, etc... I purchased a metal Thermostat housing that just must not of been made to spec. It just wouldn't plug up the hose.. Went back to a plastic cheap housing - leak fixed. Some plumbers tape carefully placed in tandem with a clamp likely would've gotten the job done.   Best,
    • SwitchBladeSierra
      AUX switch install

      By SwitchBladeSierra · Posted

      For anyone following, this is what I have deduced from this forum - and my very specific niche case. Please do let me know if you see me going in the wrong direction here. For context, I have a 16 sierra 1500 w/t. Has TC and Cargo light switches. Removed the switch to find the X1 and X2 of the S48A connection populated with wires (x1 10-14, and x2 1-5).   Took photos of the X61A-X5 to find the wires from S48A-X1 land here at their respective pins (10, 11, 17, 23 on the X5). Was hopeful that this means my X51A fuse box has the appropriate pins... No cigar. So now I will be routing wires from the rear of the X61A-X1 to the engine bay and to their respective negative relay triggers. Please see to the diagram. If any has insight as to where the S48A-X2 pins 4 and 5 land that would be awesome.   Will be attempting this sometime shortly and will likely make a youtube video out of it.   Note: please disregard fuse sizes. Main fuse will likely be 25A, all mini bus fuses will likely be 10-15A.   Here is my parts list: GM 84347199 - TC, Cargo Light, Exhaust Brake (useless to me unless I find a means to reconfigure), Aux 1 - 4. 12V 6 Way Pre-Wired Fuse Relay Box Kit with 4 x 40A 4-Pin Relays (link below - some mods required to make negative trigger)            https://www.amazon.ca/dp/B0F4KCS43B?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Various wire sizes (12 AWG - red and black, 14 AWG, 16 AWG multi-colored bundle) Wire termination leads for X61A-X1 (unknown at this time) Crimp connectors/Soldering Gun Heat Shrink Split Wire Loom To be continued...    Cheers

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...