Jump to content

Recovery hook

Shooter1
 Share

Recommended Posts

javierh41 Enthusiast

javierh41

Posted
Posted (edited)

Trying to swap out the black hooks to chrome on my 2017 silverado 1500. Passenger side easy but the front bolt on the drivers side hits a bumper bracket. If it had been installed the other direction it would be no problem. Do you have to cut it out or is there another trick? Have seen the videos for 2014 and 15 models but 2017 is different.

Don't cut the bolt, no need. I removed mine by loosening the bracket it hits.. you have to remove 3 bolts, pry the bracket apart with flat head. wiggle it out it took about 5 minutes.

 

just re install the bolt from the other side, pretty easy.

I don't know Why GM did this but i am sure they bolt the tow hooks before installing that bracket.

Edited by javierh41
  • Like 1
  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

JimCost2014
JimCost2014

Yes, cut the bolt. If you bought the hooks from GM they come with new hardware, so no point in trying to save the old bolt by tearing off/moving things that don't need to be touched. Above poster with

No Tyme
No Tyme

NO, you do NOT have to cut the bolt. I did this last month, with the help of a you tube video on installing a bull bar a guy showed 3 extra bolts that you undo and pry up on the top piece where the he

mike67naz
mike67naz

2014-2015 correct. Changed on 2016 and up. I know, just checked this weekend, my 2016 Sierra does not have the same exposed bolts to undue.

Posted Images

DougIrby Enthusiast

DougIrby

Posted
Posted

I wonder why recovery hooks come standard on 4WD and not on 2WD, which needs them more than the 4WD's?

 

I wish I had them on my 2WD. Maybe I'll buy a pair and install them. Never know when I may need them.

Krusty Enthusiast

Krusty

Posted
Posted (edited)

Used mine a couple of times is all on the 2007 - you had to trim the plastic facia to even get a good size strap thru them. Yarded an old Ford truck out side ways once that had sat for years and broke the brakes free. Another time to brake a truck as it rolled off a trailer with the wife steering - it no working brakes of it's own.......

Edited by Krusty
  • 2 months later...
mike67naz Enthusiast

mike67naz

Posted
Posted

Guys, could use some help.....Is there a trick to installing the hooks after you remove?  Took out passenger side, and tried putting in new chrome ones.  Could not get it to go in...Still have the plastic piece between frame end and bumper there.   Shoud it just slide in or is it a super tight fit?

 

Thanks

 

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted

My chrome hooks slid right in. The only bitch about the entire install was the drivers side long bolt that needed to be cut to remove.

mike67naz Enthusiast

mike67naz

Posted
Posted

Plan on removing driver side tomorrow....did they slide straight in or angle or something?  I can start the long side, but short side stops for some reason....

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted

They went in straight. I would measure the new hook versus the old hook, just to make sure that the new one isn't oversized.

  • 2 weeks later...
Skylane765 New Member

Skylane765

Posted
Posted (edited)

We have receivers and the new big D tow hook for the 2005 to 2017 4x4 trucks, they will also fit the 2 wheel drive with a cut out. We are becoming a vendor on this site if we ever hear back from them. They come with the receiver you swap out with the existing d ring.  tow hooks can be unscrewed from receiver if needed.   www.zl1addons.com

JDJ_3459.JPG

JDJ_3468.JPG

Edited by Skylane765
ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted
17 hours ago, Skylane765 said:

We have receivers and the new big D tow hook for the 2005 to 2017 4x4 trucks, they will also fit the 2 wheel drive with a cut out. We are becoming a vendor on this site if we ever hear back from them. They come with the receiver you swap out with the existing d ring.  tow hooks can be unscrewed from receiver if needed.   www.zl1addons.com

JDJ_3459.JPG

JDJ_3468.JPG

$500 for two of these????

 

I'll buy a $50 black set and pass on some fancy tow hooks.

  • Haha 1
ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted
On 10/27/2017 at 5:30 PM, mike67naz said:

Guys, could use some help.....Is there a trick to installing the hooks after you remove?  Took out passenger side, and tried putting in new chrome ones.  Could not get it to go in...Still have the plastic piece between frame end and bumper there.   Shoud it just slide in or is it a super tight fit?

 

Thanks

 

 

Anyway you can tell me the stats on the bolt head to install the hooks?  I'd like to pick up two from HD (my truck is a 2WD) since I'm buying my recovery hooks on CL.

Waterfowler41 Senior Enthusiast

Waterfowler41

Posted
Posted
I just installed red tow hooks on my 2017 z71 silverado. I used a sawzall to cut the head off the head of the bolt off on the driver side. Slide the bolt out until it touched the bracket and held the head with a pair of vise grips and cut the bolt. Was a piece of cake.


How did you reinstall the new hooks without removing the bumper?

I cut my bolts for a bull bar and want to reinstall my tow hooks but see no other way other than removing the bumper.


Sent from my iPhone using Tapatalk
Huetatos Enthusiast

Huetatos

Posted
Posted

Bumper removal is pretty easy. At least on the silverado. Pull the bolts for the rear support bars on each side. Two 15mm bolts accessible on each side from the center with the grille off. Bumper will just be picked up. It weighs like 100 lbs ish.

Skylane765 New Member

Skylane765

Posted
Posted (edited)

Very easy to install, just remove the OEM stock hook and ours bolt right in its place, for the non 4x4 they will fit also just drill a 1 inch hole though the plastic cover and NO NEED TO MODIFY OR REMOVE BUMPER. All the frames of the trucks have existing holes for the tow hook receivers. if you look under the bumper you will see you can get to the frame to install them.

Edited by Skylane765
Huetatos Enthusiast

Huetatos

Posted
Posted

I'm sorry, but at 500 bucks for a set of tow hooks, that is insane. You can get the red ones from GM for 100 bucks or the black for 50. That price is way too rich for my blood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined

  • Who's Online   0 Members, 0 Anonymous, 267 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • davester
      My First Project and GMC has me stumped

      By davester · Posted

      are there any codes? with lots of rust, perhaps disconnect/clean both sides of the connection/examine cable ends (the wires) for corrosion going into the sheath & replace if necessary/reconnect ALL the power AND ground cables between the battery, engine, frame, cab, fuse box and starter charm.li (website) has a no-start diagnostic procedure you can work through to get it working.
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...