Jump to content

Recovery hook

Shooter1
 Share

Recommended Posts

javierh41 Enthusiast

javierh41

Posted
Posted (edited)

Trying to swap out the black hooks to chrome on my 2017 silverado 1500. Passenger side easy but the front bolt on the drivers side hits a bumper bracket. If it had been installed the other direction it would be no problem. Do you have to cut it out or is there another trick? Have seen the videos for 2014 and 15 models but 2017 is different.

Don't cut the bolt, no need. I removed mine by loosening the bracket it hits.. you have to remove 3 bolts, pry the bracket apart with flat head. wiggle it out it took about 5 minutes.

 

just re install the bolt from the other side, pretty easy.

I don't know Why GM did this but i am sure they bolt the tow hooks before installing that bracket.

Edited by javierh41
  • Like 1
  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

JimCost2014
JimCost2014

Yes, cut the bolt. If you bought the hooks from GM they come with new hardware, so no point in trying to save the old bolt by tearing off/moving things that don't need to be touched. Above poster with

No Tyme
No Tyme

NO, you do NOT have to cut the bolt. I did this last month, with the help of a you tube video on installing a bull bar a guy showed 3 extra bolts that you undo and pry up on the top piece where the he

mike67naz
mike67naz

2014-2015 correct. Changed on 2016 and up. I know, just checked this weekend, my 2016 Sierra does not have the same exposed bolts to undue.

Posted Images

DougIrby Enthusiast

DougIrby

Posted
Posted

I wonder why recovery hooks come standard on 4WD and not on 2WD, which needs them more than the 4WD's?

 

I wish I had them on my 2WD. Maybe I'll buy a pair and install them. Never know when I may need them.

Krusty Enthusiast

Krusty

Posted
Posted (edited)

Used mine a couple of times is all on the 2007 - you had to trim the plastic facia to even get a good size strap thru them. Yarded an old Ford truck out side ways once that had sat for years and broke the brakes free. Another time to brake a truck as it rolled off a trailer with the wife steering - it no working brakes of it's own.......

Edited by Krusty
  • 2 months later...
mike67naz Enthusiast

mike67naz

Posted
Posted

Guys, could use some help.....Is there a trick to installing the hooks after you remove?  Took out passenger side, and tried putting in new chrome ones.  Could not get it to go in...Still have the plastic piece between frame end and bumper there.   Shoud it just slide in or is it a super tight fit?

 

Thanks

 

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted

My chrome hooks slid right in. The only bitch about the entire install was the drivers side long bolt that needed to be cut to remove.

mike67naz Enthusiast

mike67naz

Posted
Posted

Plan on removing driver side tomorrow....did they slide straight in or angle or something?  I can start the long side, but short side stops for some reason....

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted

They went in straight. I would measure the new hook versus the old hook, just to make sure that the new one isn't oversized.

  • 2 weeks later...
Skylane765 New Member

Skylane765

Posted
Posted (edited)

We have receivers and the new big D tow hook for the 2005 to 2017 4x4 trucks, they will also fit the 2 wheel drive with a cut out. We are becoming a vendor on this site if we ever hear back from them. They come with the receiver you swap out with the existing d ring.  tow hooks can be unscrewed from receiver if needed.   www.zl1addons.com

JDJ_3459.JPG

JDJ_3468.JPG

Edited by Skylane765
ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted
17 hours ago, Skylane765 said:

We have receivers and the new big D tow hook for the 2005 to 2017 4x4 trucks, they will also fit the 2 wheel drive with a cut out. We are becoming a vendor on this site if we ever hear back from them. They come with the receiver you swap out with the existing d ring.  tow hooks can be unscrewed from receiver if needed.   www.zl1addons.com

JDJ_3459.JPG

JDJ_3468.JPG

$500 for two of these????

 

I'll buy a $50 black set and pass on some fancy tow hooks.

  • Haha 1
ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted
On 10/27/2017 at 5:30 PM, mike67naz said:

Guys, could use some help.....Is there a trick to installing the hooks after you remove?  Took out passenger side, and tried putting in new chrome ones.  Could not get it to go in...Still have the plastic piece between frame end and bumper there.   Shoud it just slide in or is it a super tight fit?

 

Thanks

 

 

Anyway you can tell me the stats on the bolt head to install the hooks?  I'd like to pick up two from HD (my truck is a 2WD) since I'm buying my recovery hooks on CL.

Waterfowler41 Senior Enthusiast

Waterfowler41

Posted
Posted
I just installed red tow hooks on my 2017 z71 silverado. I used a sawzall to cut the head off the head of the bolt off on the driver side. Slide the bolt out until it touched the bracket and held the head with a pair of vise grips and cut the bolt. Was a piece of cake.


How did you reinstall the new hooks without removing the bumper?

I cut my bolts for a bull bar and want to reinstall my tow hooks but see no other way other than removing the bumper.


Sent from my iPhone using Tapatalk
Huetatos Enthusiast

Huetatos

Posted
Posted

Bumper removal is pretty easy. At least on the silverado. Pull the bolts for the rear support bars on each side. Two 15mm bolts accessible on each side from the center with the grille off. Bumper will just be picked up. It weighs like 100 lbs ish.

Skylane765 New Member

Skylane765

Posted
Posted (edited)

Very easy to install, just remove the OEM stock hook and ours bolt right in its place, for the non 4x4 they will fit also just drill a 1 inch hole though the plastic cover and NO NEED TO MODIFY OR REMOVE BUMPER. All the frames of the trucks have existing holes for the tow hook receivers. if you look under the bumper you will see you can get to the frame to install them.

Edited by Skylane765
Huetatos Enthusiast

Huetatos

Posted
Posted

I'm sorry, but at 500 bucks for a set of tow hooks, that is insane. You can get the red ones from GM for 100 bucks or the black for 50. That price is way too rich for my blood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,978
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined

  • Who's Online   1 Member, 0 Anonymous, 492 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      AFM Experience

      By Grumpy Bear · Posted

      Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Blade8971
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Blade8971 · Posted

      Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...